journal article·2016-08

Opposite role of different carbon fiber reinforcements on the non-isothermal crystallization behavior of poly(etheretherketone)

Marco Regis, Marco Zanetti, Michele Pressacco, Pierangiola Bracco

Publisher page

Abstract

Abstract A non-isothermal crystallization study on two different 30%w carbon fiber (PAN and pitch-based) reinforced PEEK was performed by differential scanning calorimetry (DSC), aiming to provide more information on PEEK crystallization behavior in the presence of reinforcements. Melt crystallization was performed by cooling down the CFR-PEEK samples from the molten state with different cooling rates (from 2 to 50 °C/min). Samples were subsequently heated up again at 400 °C at 20 °C/min to evaluate any potential differentiation in the created crystal structures. The same experiments were run also for unfilled PEEK, taken as reference. Crystallization kinetics (with Avrami and Avrami-Ozawa approaches), and activation energies (according to Friedman method) were evaluated. The results showed that the cooling rate influences crystal growth and morphology but also, more importantly, that fiber type affects the crystallization mechanisms, either favoring or hindering polymer crystallization, depending on the fiber characteristics, geometry and density. Overall, these observations suggest that accurate fiber selection and processing conditions set up have to be chosen to ensure an optimal polymer morphology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
2. Thermoplastics and thermoplastic composites 2nd ed
3. Crystallization of poly(etheretherketone) (PEEK) in carbon fiber composites10.1002/pen.760260909 ↗
4. The morphology of poly(aryl-ether-ether-ketone)10.1016/0032-3861(83)90144-1 ↗
5. Isothermal crystallization and melting behavior of short carbon fiber reinforced poly(ether ether ketone) composites10.1007/s10965-006-0060-9 ↗
6. Time-resolved SAXS, WAXS, and DSC study of melting of poly(aryl ether ether ketone) (PEEK) annealed from the amorphous state10.1021/ma961151i ↗
7. Non-isothermal crystallization kinetic behavior of alumina nanoparticle filled poly(ether ether ketone)10.1016/j.matchemphys.2005.10.021 ↗
8. Double-melting behavior of poly (ether ether ketone)10.1021/ma00172a028 ↗
9. Experimental study of crystallization of PolyEtherEtherKetone (PEEK) over a large temperature range using a nano-calorimeter10.1016/j.polymertesting.2014.03.013 ↗
10. Crystallization behavior and morphological characterization of poly(ether ether ketone)
11. Nonisothermal crystallization behavior of poly(ary1 ether ether ketone)10.1002/pen.10793 ↗
12. Time-resolved X-ray study of poly(aryl ether ether ketone) crystallization and melting behaviour: 1. Crystallization10.1016/0032-3861(93)90658-W ↗
13. Temperature modulated DSC and DSC studies on the origin of double melting peaks in poly(ether ether ketone)10.1016/j.polymer.2003.10.009 ↗
14. Crystallization behaviour of poly(ether-ether-ketone)10.1016/0032-3861(86)90006-6 ↗
15. Crystallinity of isothermally and nonisothermally crystallized poly(ether ether ketone) composites10.1002/pc.10141 ↗
16. Prediction and analysis of nonisothermal crystallization of polymers10.1002/(SICI)1099-0488(19970430)35:6<875::AID-POLB2>3.0.CO;2-H ↗
17. Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone)10.1002/pen.11700 ↗
18. On the crystallization behavior of the nano-silica filled PEEK composites10.1016/j.matchemphys.2010.04.043 ↗
19. Nonisothermal crystallization behavior and mechanical properties of PEEK/SCF/nano-SiO2 composites10.1016/j.matchemphys.2014.06.041 ↗
20. Composite science and technology 2020-scientific and technical challenges
21. Unified isothermal and non-isothermal modelling of neat PEEK crystallization10.1007/s10973-013-3308-8 ↗
22. High-speed calorimetry for the study of the kinetics of (de)vitrification, crystallization, and melting of macromolecules10.1021/ma011122u ↗
23. Kinetics of nucleation and crystallization in poly(ɛ-caprolactone) (PCL)10.1016/j.polymer.2011.03.013 ↗
24. Nonisothermal crystallization behavior of a novel poly(aryl ether ketone): PEDEKmK10.1002/(SICI)1097-4628(19980131)67:5<815::AID-APP6>3.0.CO;2-W ↗
25. Is the Kissinger equation applicable to the processes that occur on cooling?10.1002/1521-3927(20020901)23:13<771::AID-MARC771>3.0.CO;2-G ↗
26. Crystal morphology and nonisothermal crystallization kinetics of short carbon fiber/poly(trimethylene terephthalate) composites10.1002/app.26661 ↗
27. Kinetics of phase change. I: general theory10.1063/1.1750380 ↗
28. Kinetics of phase change. II transformation-time relations for random distribution of nuclei10.1063/1.1750631 ↗
29. Granulation, phase change, and microstructure kinetics of phase change. III10.1063/1.1750872 ↗
30. A thermodynamic approach to model the caloric properties of semicrystalline polymers10.1007/s00161-015-0415-8 ↗
31. Crystallization kinetics and nucleation activity of silica nanoparticle-filled poly(ethylene 2,6-naphthalate)10.1016/S0032-3861(03)00623-2 ↗
32. Annealing effects on the crystallinity of polyetheretherketone (PEEK) and its carbon fiber composite10.1002/app.1987.070330103 ↗
33. Investigation of the melting behavior of poly(aryl ether ketones) by simultaneous measurements of SAXS and WAXS employing synchrotron radiation10.1021/ma00071a035 ↗
34. Glass transition and molecular dynamics in poly(dimethylsiloxane)/silica nanocomposites10.1016/j.polymer.2005.05.080 ↗
35. Structure-property relationships in polyamide 6/multi-walled carbon nanotubes nanocomposites10.1002/polb.21681 ↗
36. On crystallization phenomena in PEEK10.1016/0032-3861(88)90386-2 ↗