journal article·2019-05

Kinetic and thermodynamic description of intermediary phases formation in Ti-Al system during reactive sintering

Andrea Školáková, Jindřich Leitner, Pavel Salvetr, Pavel Novák, Davy Deduytsche, Jaromír Kopeček, Christophe Detavernier, Dalibor Vojtěch

Publisher page

Abstract

Abstract Reactive sintering is currently considered as a promising production route for titanium aluminides in many research works. However, the published descriptions of the reaction mechanism are contradictory or lacking, especially at the temperatures below the melting point of aluminium. This work aims to fill this gap, providing the description of the reactive sintering process at the temperatures between 400 and 900 °C. The phases’ formation sequence and reaction kinetics were studied and explained using experimental model (Ti/Al diffusion couple) and real reactively sintered samples of equiatomic Ti-Al compressed powder blend. Moreover, phase formation was thermodynamically assessed. It was revealed that Ti2Al5 phase formed preferentially. This phase has not been reported previously as a starting phase in reactive sintering. According to results obtained by experimental model, its formation is controlled by diffusion at 700 °C. This phase reacted with aluminium forming pure TiAl3 phase or with titanium, resulting in TiAl phase. Subsequently, TiAl phase reacted with titanium, leading to the Ti3Al phase, or with already present Ti2Al5 phase yielding TiAl2 intermetallic compound. Titanium-rich Ti3Al phase could form only at the temperature of 600 °C or above.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Preparation of γ-TiAl intermetallic compounds through self-propagating high-temperature synthesis and compaction10.1134/S0020168508110095 ↗
2. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
3. Alloy design of gamma titanium aluminide, intermetallic compound
4. Fine TiAl and NiAl powders by SHS with a reduction stage10.3103/S1061386209020058 ↗
5. Application of cast gamma TiAl for automobiles10.1016/S0966-9795(98)00060-0 ↗
6. A thermodynamic description of the Ti-Al system10.1016/S0966-9795(97)00030-7 ↗
7. Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy10.1016/j.intermet.2004.07.046 ↗
8. Structure and morphology of Ti-Al composite powders treated by mechanical alloying10.1016/S1003-6326(11)61602-6 ↗
9. A study of combustion synthesis of Ti-Al intermetallic compounds10.1007/BF00352784 ↗
10. Microstructural evolution during self-propagating high-temperature synthesis of Ti-Al system10.1007/s11595-007-3281-6 ↗
11. DSC research on critical temperature in thermal explosion synthesis reaction Ti+ 3Al→ TiAl310.1023/A:1014396519616 ↗
12. Activation energy of self-heating process studied by DSC10.1023/A:1021684726126 ↗
13. Effect of heating rate on the formation of intermetallics during SHS process10.12693/APhysPolA.128.561 ↗
14. Self-propagating high-temperature synthesis10.1007/BF00576271 ↗
15. Ignition mechanism in combustion synthesis of Ti–Al and Ti–Ni systems10.1016/S0966-9795(02)00128-0 ↗
16. On the formation of TiAl3 during reaction between solid Ti and liquid Al10.1007/BF02765402 ↗
17. Where reactive sintering beats melt technology10.1016/S0026-0657(09)70058-X ↗
18. Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds10.1007/BF01165971 ↗
19. Synthesis and microstructural characterization of Ti–Al3Ti metal–intermetallic laminate (MIL) composites10.1016/j.scriptamat.2004.09.010 ↗
20. Microstructure and properties of a TiAl alloy prepared by mechanical milling and subsequent reactive sintering10.1016/j.msea.2005.04.049 ↗
21. The nature and growth of interaction layers formed during the reaction between solid titanium and liquid aluminium10.1016/0022-5088(59)90062-1 ↗
22. Mathematical and experimental investigation of the self-propagating high-temperature synthesis (SHS) of TiAl3 and Ni3Al intermetallic compounds10.1007/BF00354680 ↗
23. Massalski · 1990
24. A study of combustion synthesis reaction in the Ti+C/Ti+Al system10.1023/B:JMSC.0000017769.40870.8d ↗
25. Formation of phases in Ti-Al system at 800 °C10.21062/ujep/x.2017/a/1213-2489/MT/17/5/838 ↗
26. Diffusion in the titanium-aluminium system—I. Interdiffusion between solid Al and Ti or Ti-Al alloys10.1016/0001-6160(73)90220-4 ↗
27. Formation of Ti-Al phases during SHS process10.12693/APhysPolA.134.743 ↗
28. Thermodynamic assessment and calculation of the Ti-Al system10.1007/BF02646001 ↗