journal article·2020-07

The role of Cr in the reactive synthesis of porous FeAlCr intermetallic compounds

Huibin Zhang, Haiyan Gao, Hang Yu, Longfei Wang, Xinli Liu, Junliang Ma, Ninghui Zhang, Yuehui He, Yao Jiang

Publisher page

Abstract

Abstract This work prepared a series of porous FeAlCr intermetallic compounds with the Cr content ranging from 5 wt% to 20 wt% by a reactive synthesis method using element powders. These porous FeAlCr materials correspond to the B2-structured FeAl intermetallic (α2) that distinguishes them from the traditional FeCrAl solid-solution alloy (α1) porous materials. The exothermic behaviors, phase characteristics, pore structures and oxidation behaviors of porous FeAlCr with the variation of Cr content were systematically studied. The results showed that upon increasing the Cr content, the released heat during synthesis process was remarkably reduced, while the volume expansion, pore size and open porosity were increased in direct proportion. The linear changes in sample size and pore structure were ascribed to the preferential growth of Al4Cr phase. The oxidation behaviors of porous FeAlCr materials at 600 °C followed a parabolic-linear law, and their oxidation mass gain rates were much slower than those of other reported Ni-based and Fe–Cr alloys. This work proves that to a certain extent the high content of Cr is conducive to the controllable synthesis and high-temperature oxidation resistance of porous FeAlCr materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Leaching of valuable elements from thermal power plant bottom ash using a thermo-hydrometallurgical process10.1177/0734242X16633775 ↗
2. Selective leaching process for the recovery of copper and zinc oxide from copper-containing dust10.1080/09593330.2014.960479 ↗
3. Semi-coke powder filtration experiments using a dual layer granular bed filter10.1016/j.apt.2018.09.004 ↗
4. Direct separation of arsenic and antimony oxides by high-temperature filtration with porous FeAl intermetallic10.1016/j.jhazmat.2017.05.049 ↗
5. Feasibility of manufacturing phosphoric acid by smelting reduction technology10.1179/037195505X28456 ↗
6. Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating10.1016/j.ceramint.2019.03.032 ↗
7. Filtering properties of porous materials made of thin stainless steel fibers10.1007/s11106-015-9692-9 ↗
8. Effect of powder shape and sintering temperature on the preparation of Ni-based porous metal10.24425/amm.2019.129472 ↗
9. Hierarchical porous ceramics with 3D reticular architecture and efficient flow-through filtration towards high-temperature particulate matter capture10.1016/j.cej.2019.01.065 ↗
10. Pore structure control for porous FeAl intermetallics10.1016/j.intermet.2012.08.030 ↗
11. Effect of aluminium evaporation loss on pore characteristics of porous FeAl alloys produced by vacuum sintering10.1007/s10853-011-5771-6 ↗
12. Porous FeAl intermetallics fabricated by elemental powder reactive synthesis10.1016/j.intermet.2009.05.007 ↗
13. Reactive synthesis and assessment of porous Fe-20.5Al-18Cr intermetallic material: a comparative study with porous FeCrAl material produced from prealloyed powders10.1016/j.seppur.2019.03.054 ↗
14. Suppression of the SHS reactions during synthesis of porous FeAl intermetallics by introducing silicon10.1016/j.jallcom.2017.11.291 ↗
15. Modification of the reactive synthesis of porous FeAl with addition of Si10.1080/09603409.2018.1439683 ↗
16. Structural characteristics and high-temperature oxidation behavior of porous Fe-40at.%Al alloy10.1007/s10853-009-3669-3 ↗
17. Preparation and pore structure stability at high temperature of porous Fe-Al intermetallics10.1007/s11665-013-0703-z ↗
18. Development of a new graded-porosity FeAl alloy by elemental reactive synthesis10.1016/j.desal.2009.06.012 ↗
19. Effect of alloying on corrosion resistance of B2 FeAl alloy in aqueous solution of sulfuric acid10.1016/j.matchemphys.2010.11.020 ↗
20. Effect of chromium ternary additions on the ordering behaviour in Fe–28at.% Al alloy10.1016/j.matchemphys.2008.06.045 ↗
21. Sulfidation–oxidation behavior of FeCrAl and TiCrAl and the third-element effect10.1007/s11085-010-9194-6 ↗
22. Al-Cr-Fe (aluminum-chromium-iron)10.1361/105497103770330587 ↗
23. Criterion to control self-propagation high temperature synthesis for porous Ti-Al intermetallics10.1179/003258910X12707304455266 ↗
24. Fabrication of Ti-Al micro/nanometer-sized porous alloys through the Kirkendall effect10.1002/adma.200602398 ↗
25. First phase formation at interfaces: comparison between walser-bené and effective heat of formation model10.1016/S0254-0584(96)01805-6 ↗
26. Thin film compound phase formation sequence: an effective heat of formation model10.1016/0920-2307(93)90003-W ↗
27. Thermodynamic investigation of the aluminum-chromium system10.1361/105497100770340219 ↗
28. Effects of the Al content on pore structures of porous Ti-Al alloys10.1016/j.intermet.2007.11.002 ↗
29. First phase formation at interfaces: effective heat of formation model for ternary systems10.1016/0921-5093(95)10070-9 ↗
30. Oxidation behavior of reactively synthesized porous Ti3(Si,Al)C2 compound at 800 °C in ambient air10.1016/j.ceramint.2019.05.051 ↗
31. Evaluation of porous 430L stainless steel for SOFC operation at intermediate temperatures10.1016/j.jpowsour.2007.10.009 ↗
32. Evaluation of 316L porous stainless steel for SOFC support10.1016/j.jeurceramsoc.2008.07.027 ↗
33. High temperature stability of porous metal substrates under highly humidified hydrogen conditions for metal supported Solid Oxide Fuel Cells10.1016/j.ssi.2012.06.014 ↗
34. Surface oxidation of Al-Cr-Fe alloys characterized by X-ray photoelectron spectroscopy10.1016/S0169-4332(01)00011-3 ↗
35. Initial oxidation of Fe-Al and Fe-Cr-Al alloys: Cr as an alumina booster10.1007/s11085-011-9258-2 ↗