Role of graphitization-controlled conductivity in enhancing absorption dominated EMI shielding behavior of pyrolysis-derived Fe3C@C-PVDF nanocomposites
Source abstract
Abstract
Abstract The role of improved graphitization-induced conductivity on imparting better electromagnetic interference (EMI) shielding effectiveness (SE) in the X-band frequency regime is demonstrated in pyrolysis-derived Fe3C@C based nanocomposites with PVDF polymer. Variation of synthesis temperature (Ts) is used as a strategic tool to modulate the graphitization and the associated conductivity of Fe3C@C particles. Two different carbonaceous-nanomaterials, both embedded with graphite encapsulated Fe3C-nanoparticles were synthesized at Ts = 800 °C (Fe-800) and Ts = 1000 °C (Fe-1000). We have shown that a higher synthesis temperature results in a thicker well-graphitized carbon-shell around the core (Fe3C) nanoparticles. The better degree of graphitization makes the samples better conducting. These two samples were dispersed separately in flexible polyvinylidene fluoride (PVDF) matrix to form polymer-nanocomposites. The SE of the PVDF:Fe-1000 nanocomposite film is higher than that of the PVDF:Fe-800 nanocomposite film. This high SE of the PVDF:Fe-1000 nanocomposite film is associated with the higher conductivity resulting from the higher degree of graphitization of the Fe-1000 sample. Effectively, the synergetic effects of electric and magnetic losses enhance the absorption-dominated EMI shielding of our nanocomposite-system, making them potential candidates for their direct industrial applications. Simultaneously, our work provides a strategy to control the EMI-SE of nanocomposites through control of the synthesis parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Tong · 2016
2. Hitchcock · 2004
3. Kitchen · 2001
4. Biological effects of microwave radiation10.1097/00004032-197106000-00003 ↗
5. Materials for electromagnetic interference shielding10.1361/105994900770346042 ↗
6. Sebastian · 2010
7. Shielding theory and practice10.1109/15.3297 ↗
8. Shielding coatings based on carbon–polymer composites10.1016/j.surfcoat.2011.08.018 ↗
9. Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding10.1016/j.matchemphys.2008.08.065 ↗
10. Self assembled polyaniline nanofibers with enhanced electromagnetic shielding properties10.1039/C5RA02113H ↗
11. A facile formulation and excellent electromagnetic absorption of room temperature curable polyaniline nanofiber based inks10.1039/C5TC03080C ↗
12. EMI shielding measurements of conductive polymer blends10.1109/19.137363 ↗
13. Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗
14. Electromagnetic interference shielding properties of butyl rubber-single walled carbon nanotube composites10.1016/j.compscitech.2014.07.002 ↗
15. An anisotropic layer-by-layer carbon nanotube/boron nitride/rubber composite and its application in electromagnetic shielding10.1039/C9NR10672C ↗
16. Lightweight hierarchical carbon nanocomposites with highly efficient and tunable electromagnetic interference shielding properties10.1021/acsami.9b02309 ↗
17. Reduced graphene oxide (RGO) modified spongelike polypyrrole (PPy) aerogel for excellent electromagnetic absorption10.1039/C5TA01577D ↗
18. Two-step reduction of self-assembled three-dimensional (3D) reduced graphene oxide (RGO)/zinc oxide (ZnO) nanocomposites for electromagnetic absorption10.1039/C4TA04959D ↗
19. An ultra-thin carbon-fabric/graphene/poly(vinylidene fluoride) film for enhanced electromagnetic interference shielding10.1039/C9NR03603B ↗
20. One-pot synthesis of biomass-derived carbonaceous spheres for excellent microwave absorption at the Ku band10.1039/C5RA06307H ↗
21. The EMI shielding effectiveness of PC/ABS/nickel-coated-carbon-fibre composites10.1016/S0014-3057(00)00039-2 ↗
22. Effect of coral-shaped yttrium iron garnet particles on the EMI shielding behaviour of yttrium iron garnet-polyaniline-wax composites10.1002/slct.201702698 ↗
23. Mechanistic insight into the critical concentration of barium hexaferrite and the conductive polymeric phase with respect to synergistically electromagnetic interference (EMI) shielding10.1002/slct.201601895 ↗
24. Electromagnetic interference shielding effectiveness of carbon materials10.1016/S0008-6223(00)00184-6 ↗
25. EMI shielding measurements of conductive polymer blends10.1109/19.137363 ↗
26. Thin polyaniline films in EMI shielding10.1016/S0379-6779(97)80259-7 ↗
27. Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites10.1016/S1359-8368(98)00065-1 ↗
28. Alignment of graphene sheets in wax composites for electromagnetic interference shielding improvement10.1088/0957-4484/24/11/115708 ↗
29. Electromagnetic interference shielding effectiveness of monolayer graphene10.1088/0957-4484/23/45/455704 ↗
30. Towards cost-efficient EMI shielding materials using carbon nanostructure-based nanocomposites10.1088/0957-4484/18/34/345701 ↗
31. Effect of carbon fiber addition on the electromagnetic shielding properties of carbon fiber/polyacrylamide/wood based fiberboards10.1088/1361-6528/aab243 ↗
32. Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst10.1063/1.1641167 ↗
33. Uniform Fe3O4 coating on flower-like ZnO nanostructures by atomic layer deposition for electromagnetic wave absorption10.1039/C5DT03069B ↗
34. A facile one-pot strategy for fabrication of carbon-based microwave absorbers: effects on annealing and paraffin content10.1039/C7DT01471F ↗
35. Electromagnetic interference shielding through MWNT grafted Fe3O4 nanoparticles in PC/SAN blends10.1039/C4TA04559A ↗
36. EMI shielding performance of lead hexaferrite/polyaniline composite in 8-18 GHz frequency range
37. Effect of microstructure and magnetic properties of Ba-Pb-hexaferrite particles on EMI shielding behavior of Ba-Pb-hexaferrite-Polyaniline-Wax nanocomposites10.1007/s11664-019-07478-y ↗
38. Thermal spraying of Co,Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications10.1016/j.surfcoat.2009.04.007 ↗
39. Jackson · 1999 · 13
40. Rational design of CNTs with encapsulated Co nanospheres as superior acid- and base-resistant microwave absorbers10.1039/C8DT02037J ↗
41. Switching the electromagnetic properties of multicomponent porous carbon materials derived from bimetallic metal–organic frameworks: effect of composition10.1039/C7DT00156H ↗
42. Enhancing absorption dominated microwave shielding in Co@C–PVDF nanocomposites through improved magnetization and graphitization of the Co@C-nanoparticles10.1039/C9CP03305J ↗
43. EMI shielding behaviors of Ni-coated MWCNTs-filled epoxy matrix nanocomposites10.1016/j.surfcoat.2014.01.030 ↗
44. Electromagnetic shielding and corrosion resistance of electroless Ni–P/Cu–Ni multilayer plated polyester fabric10.1016/j.surfcoat.2011.03.033 ↗
45. Ultrasonic-assisted electroless deposition of Ag on PET fabric with low silver content for EMI shielding10.1016/j.surfcoat.2010.02.061 ↗
46. Carbon encapsulated nanoscale iron/iron-carbide/graphite particles for EMI shielding and microwave absorption10.1039/C7CP03175K ↗
47. Engineering nanostructures by decorating magnetic nanoparticles onto Graphene Oxide Sheets to shield electromagnetic radiations10.1021/acsami.5b02703 ↗
48. Extraordinary synergy in attenuating microwave radiation with cobalt‐decorated graphene oxide and carbon nanotubes in polycarbonate/poly (styrene‐co‐acrylonitrile) blends10.1002/cnma.201500154 ↗
49. Modulating non-linear optical absorption through controlled graphitization of carbon nanostructures containing Fe3C-graphite core-shell nanoparticles10.1016/j.carbon.2019.07.058 ↗
50. FeCoCr alloy-nanoparticle embedded bamboo-type carbon nanotubes for non-linear optical limiting application10.1016/j.jallcom.2020.156665 ↗
51. Ni nanoparticles coated with nitrogen-doped carbon for optical limiting applications10.1021/acsanm.0c01284 ↗
52. Infrared photodetectors based on multiwalled carbon nanotubes: insights into the effect of nitrogen doping10.1016/j.apsusc.2020.148187 ↗
53. Graphene-oxide coating for corrosion protection of iron particles in saline water10.1016/j.carbon.2018.08.062 ↗
54. Graphene oxide coatings on amino acid modified Fe surfaces for corrosion inhibition10.1021/acsanm.0c00243 ↗
55. Role of oxygen functionalities of GO in corrosion protection of metallic Fe10.1016/j.carbon.2020.11.029 ↗
56. Measurement of the intrinsic properties of materials by time-domain techniques10.1109/TIM.1970.4313932 ↗
57. Role of pyrolysis reaction temperature and heating-rate in the growth and morphology of carbon nanostructures10.1016/j.nanoso.2017.11.002 ↗
58. Investigation of disorder in carbon encapsulated core-shell Fe/Fe3C nanoparticles synthesized by one-step pyrolysis10.1016/j.diamond.2018.10.003 ↗
59. Nitrogen doping as a fundamental way to enhance the EMI shielding behavior of cobalt particle-embedded carbonaceous nanostructures10.1039/C9NJ00639G ↗
60. Ott · 2011
61. Highly sensitive, robust and anisotropic MXene aerogels for efficient broadband microwave absorption10.1016/j.compositesb.2020.108263 ↗
62. Well-aligned MXene/chitosan films with humidity response for high-performance electromagnetic interference shielding10.1016/j.carbpol.2020.116467 ↗
63. Electrically conductive aluminum ion-reinforced MXene films for efficient electromagnetic interference shielding10.1039/C9TC06304H ↗
64. Effect of morphology and role of conductivity of embedded metallic nanoparticles on electromagnetic interference shielding of PVDF-carbonaceous-nanofiller composites10.1016/j.carbon.2020.04.007 ↗
65. Superiority of graphite coated metallic-nanoparticles over graphite coated insulating-nanoparticles for enhancing EMI shielding10.1039/D0NJ06231F ↗