Influence of butynediol and tetrabutylammonium bromide on the morphology and structure of electrodeposited cobalt in the presence of saccharin
Source abstract
Abstract
Abstract To develop cobalt coating for use in diamond tools, cobalt electrodeposition was conducted in Watts-type baths. The effects of tetrabutylammonium bromide and 2-butyne-1,4-diol on the surface morphology, crystallographic structure, surface roughness and microhardness of thick cobalt deposits were investigated in the presence of saccharin. The addition of tetrabutylammonium bromide had a modest effect on the morphology, crystallographic structure and microhardness of cobalt deposits, while it reduced the surface roughness noticeably. On the other hand, the addition of 2-butyne-1,4-diol favored the formation of a much smoother deposit, but unexpectedly, it dramatically decreased the microhardness as a result of increased grain size, accompanied by the changes both in the morphology from fine-grained structure to lenticular structure and in the crystal structure from (0002) preferred orientation to (10 1 ¯ 0) preferred orientation. With the addition of a mixture of saccharin, tetrabutylammonium bromide and 2-butyne-1,4-diol, a harder and smoother thick cobalt deposit was obtained. To understand the role of these additives, linear sweep voltammetry and transmission electron microscopy were also used to investigate the reduction behavior of Co ions and the microstructure of cobalt deposits, respectively, which were compared with the morphological, structural and mechanical properties of cobalt deposits. Possible mechanisms for the alteration in the properties of cobalt deposits were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Evaluation and uses of composite Ni-Co matrix coatings with diamonds on steel applied by electrodeposition10.1016/0257-8972(90)90155-6 ↗
2. Improvement in tool life of electroplated diamond tools by Ni-based carbon nanotube composite coatings10.1016/j.precisioneng.2014.03.003 ↗
3. Novel application of nanocrystalline nickel electrodeposit: making good diamond tools easily, efficiently and economically10.1016/j.surfcoat.2006.10.047 ↗
4. Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-deposition10.1016/j.surfcoat.2006.12.004 ↗
5. Electrodeposition of Fe-diamond composite material for manufacture of diamond tools10.4028/www.scientific.net/AMM.37-38.398 ↗
6. Study of the morphological and magnetic structures of nanocrystalline cobalt films obtained by electrodeposition10.1016/j.matchemphys.2011.12.065 ↗
7. A comparative study of electrodeposition techniques on the microstructure and property of nanocrystalline cobalt deposit10.1016/j.matchemphys.2013.02.014 ↗
8. Magnetic electrodeposition of hierarchical cobalt oxide nanostructure from spent lithium-ion batteries: its application as supercapacitor electrode10.1021/acs.jpcc.8b03306 ↗
9. Infuence of current density and W concentration on Co–W alloys used as catalysts in electrodes for Li–O2 batteries
10. Thermal stability of catalyst for ammonia synthesis based on cobalt molybdenum nitrides
11. Phytochemical fabrication, characterization, and antioxidant application of copper and cobalt oxides nanoparticles using Sesbania sesban plant10.1007/s11696-018-0506-7 ↗
12. Modeling of activity coefficients of aqueous solutions of quaternary ammonium salts with the electrolyte-NRTL equation10.1021/ie0340701 ↗
13. Processing and characterization of impregnated diamond cutting tools using a ferrous metal matrix10.1016/j.ijrmhm.2006.08.006 ↗
14. Diamond–metal interfaces in cutting tools: a review10.1007/s10853-011-6164-6 ↗
15. Effects of saccharin and tetramethylammonium bromide on the microstructure and microhardness of thick cobalt electrodeposits10.1016/j.surfcoat.2017.09.026 ↗
16. Organic additives in zinc electroplating10.1016/0300-9416(75)90048-6 ↗
17. Electrodeposition of Fe thin films on Si(111) surfaces in the presence of sodium saccharin10.1016/j.electacta.2007.08.058 ↗
18. Studies on enhancement of surface mechanical properties of electrodeposited Ni–Co alloy coatings due to saccharin additive10.1016/j.surfcoat.2014.09.023 ↗
19. Electrodeposition of nanocrystalline Zn–Ni alloy from alkaline glycinate bath containing saccharin as additive10.1016/j.apsusc.2011.03.017 ↗
20. Friction and sliding wear behaviour of electrodeposited cobalt and cobalt–tungsten alloy coatings for replacement of electrodeposited chromium10.1016/j.wear.2009.01.006 ↗
21. Laser touch dressing of electroplated CBN grinding tools10.1016/j.procir.2016.04.012 ↗
22. On performance of brazed bonded monolayer diamond grinding wheel10.1016/S0007-8506(07)62003-4 ↗
23. Synergistic effects of coumarin and cis-2-butene-1,4-diol on high speed electrodeposition of nickel10.1016/j.surfcoat.2014.03.031 ↗
24. Hydrogen coevolution and permeation in nickel electroplating10.1023/A:1022957600970 ↗
25. The synergic impact of saccharin and 2-butyne-1,4-diol on the electrodeposition of nanocrystalline NiW alloy10.1149/1.3422505 ↗
26. Effect of a mixture of saccharin and 2-butyne-1,4-diol on electrodeposition of nano-grained Ni-Mo alloys10.1149/2.1641706jes ↗
27. Effect of 2-butyne-1,4-diol on the microstructure and internal stress of electrodeposited Fe–36 wt.%Ni alloy films10.1016/j.jallcom.2008.11.143 ↗
28. Electrodeposition of nanocrystalline nickel and cobalt coatings10.1179/0020296714Z.000000000202 ↗
29. Formation mechanisms and characterization of black and white cobalt electrodeposition onto stainless steel10.1149/1.1393435 ↗
30. Investigation of thick cobalt films electrodeposited on gold substrates10.1016/j.cplett.2012.06.008 ↗
31. Study of the morphological and magnetic structures of nanocrystalline cobalt films obtained by electrodeposition10.1016/j.matchemphys.2011.12.065 ↗
32. Effect of thiourea and saccharin on the roughness of electrodeposited ultrathin nickel and cobalt layers10.1023/A:1020174020887 ↗
33. Analysis of electrodeposition parameters influence on cobalt deposit roughness10.1016/j.apsusc.2016.04.005 ↗
34. Influence of saccharin on morphology and properties of cobalt thin films electrodeposited over n-Si(100)10.1016/j.surfcoat.2007.12.042 ↗
35. Electrodeposition of cobalt from aqueous sulphate solutions in the presence of tetra ethyl ammonium bromide10.1016/S1003-6326(15)63814-6 ↗
36. Effect of tetra propyl ammonium bromide during cobalt electrodeposition from acidic sulfate solutions10.1007/s11663-015-0301-6 ↗
37. Recovery of acetaminophen from aqueous solutions using a supported liquid membrane based on a quaternary ammonium salt as ionophore10.2478/s11696-013-0479-5 ↗
38. Interfacial properties of polycrystalline gold electrodes in tetraalkylammonium electrolytes10.1016/S0013-4686(01)00598-9 ↗
39. The role of functional groups of saccharin in electrodeposition of nanocrystalline nickel10.3103/S1068375516050112 ↗
40. Nickel electrocrystallization: influence of unsaturated organic additives on the mechanism of oriented crystal growth10.1080/00202967.1996.11871093 ↗
41. Quantitative study by atomic force microscopy and spectrophotometry of the roughness and brightness of electrodeposited nickel in the presence of additives10.1016/0040-6090(95)06616-0 ↗
42. Some fundamental aspects of levelling and brightening in metal electrodeposition10.1007/BF01024843 ↗
43. Quaternary ammonium salt assisted removal of genistein and bisphenol S from aqueous solution by nanozeolite NaY: equilibrium, kinetic and thermodynamic studies10.1016/j.molliq.2016.10.088 ↗
44. Effect of saccharin and thiourea on electrodeposition of cobalt and characteristics of deposits10.1179/0020296714Z.000000000194 ↗
45. Growth modes of electrodeposited cobalt10.1016/j.electacta.2004.04.001 ↗
46. Noncrystalline cobalt coatings on copper substrates by electrodeposition from complexing acidic glycine baths10.1016/j.matchemphys.2014.11.058 ↗
47. Effects of additives on microstructure and properties of electrodeposited nanocrystalline Ni–Co alloy coatings of high cobalt content10.1179/0020296713Z.000000000115 ↗
48. Microstructure and magnetic properties of electrodeposited cobalt film10.1007/s10853-007-2383-2 ↗
49. Influence of pulse parameters on the microstructure and microhardness of nickel electrodeposits10.1016/j.surfcoat.2007.08.023 ↗
50. Electrodeposition of Fe thin films on Si(111) surfaces in the presence of sodium saccharin10.1016/j.electacta.2007.08.058 ↗
51. Electrodeposition of zinc in the presence of quaternary ammonium compounds from alkaline chloride bath10.1007/s10800-014-0777-9 ↗
52. Effects of saccharin and quaternary ammonium chlorides on the electrodeposition of nickel from a Watts-type electrolyte10.1016/j.surfcoat.2003.09.054 ↗
53. Correlation between crystallographic texture, microstructure and magnetic properties of pulse electrodeposited nanocrystalline nickel–cobalt alloys10.1016/j.jmmm.2016.12.146 ↗
54. Nanocrystalline electrodeposited Ni: microstructure and tensile properties10.1016/S1359-6454(02)00198-2 ↗
55. The structure and mechanical properties of thick cobalt electrodeposits10.1023/A:1018666804577 ↗
56. Charpy impact energy of nanocrystalline and polycrystalline cobalt10.1016/j.scriptamat.2006.10.018 ↗
57. Microstructure of electroplated soft magnetic CoNiFe thin films10.1016/S0040-6090(00)01856-3 ↗
58. The microstructure and magnetic properties of electroplated cobalt film for perpendicular magnetic recording10.1109/TMAG.1982.1062217 ↗
59. Characteristics of electrodeposited cobalt and titania nano-reinforced cobalt composite coatings10.1016/j.surfcoat.2013.05.007 ↗