Preparation of glass shell fly ash-clay based lightweight aggregate with low water absorption by using sodium carbonate solution as binder
Source abstract
Abstract
Abstract Fly ash-clay based lightweight aggregates with low density and low water absorption were prepared using sodium carbonate solution as binder and coke particles as pore-forming agent. The addition of 60 wt% coke particles to the initial formula of only fly ash and clay could form the porous structure and effectively lower the apparent density. The apparent density, water absorption and strength of the aggregates at different conditions including mass concentration and sintering temperature were tested. It was found that the mass concentration 10 wt% of the sodium carbonate solution was the best concentration to form the completely glassy shell at 1220 °C. And the glassy shell could significantly lower the water absorption from 22.97% to 8.84%. Then the glassy shell aggregates with low density (1.22 g/cm3 apparent density), 8.84% water absorption and particle strength (4.25 MPa) were obtained. All the properties meet the national standards of GB/T 17431. Therefore, using sodium carbonate solution to replace water as the binder by spraying in the forming process is a simple and applicable way to lower the water absorption of aggregates in the industrial production of lightweight aggregates. At the same time, the production of aggregates using solid waste fly ash as a raw material can effectively reduce production costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Preparation and characterization of ceramic proppants with low density and high strength using fly ash10.1016/j.jallcom.2017.01.262 ↗
2. A review of the multi-component utilisation of coal fly ash10.1016/j.fuel.2012.03.024 ↗
3. Municipal solid waste incinerator residue recycling by thermal processes10.1016/S0956-053X(99)00315-3 ↗
4. The effect of additives on the properties of lightweight aggregates produced from clay10.1016/j.cemconcomp.2014.07.005 ↗
5. Utilization of fly ash by pelletization process ; theory , application areas and research results10.1016/S0921-3449(00)00042-2 ↗
6. Manufacturing of lightweight aggregates from biomass fly ash, beer bagasse, Zn-rich industrial sludge and clay by slow firing10.1016/j.jenvman.2019.06.059 ↗
7. The properties of fly ash derived lightweight aggregates obtained using microwave radiation10.1016/j.conbuildmat.2019.116677 ↗
8. Effect of calcium compounds on lightweight aggregates prepared by firing a mixture of coal fly ash and waste glass10.1016/j.ceramint.2017.08.110 ↗
9. Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement10.1016/j.jobe.2019.100924 ↗
10. The different properties of lightweight aggregates with the fly ashes of fluidized-bed and mechanical incinerators10.1016/j.conbuildmat.2015.10.068 ↗
11. Development of lightweight aggregate from dry sewage sludge and coal ash10.1016/j.wasman.2008.09.006 ↗
12. Effect of SiO2 , Al2O3 and CaO on characteristics of lightweight aggregates produced from MSWI bottom ash sludge (MSWI-BAS)10.1016/j.conbuildmat.2019.01.104 ↗
13. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems10.1016/j.cemconcomp.2019.103428 ↗
14. Recycling of solid wastes ferrochromium slag for preparation of eco-friendly high-strength spinel–corundum ceramics10.1016/j.matchemphys.2019.122060 ↗
15. Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag10.1016/j.conbuildmat.2017.03.083 ↗
16. Effects of sintering temperature on the characteristics of lightweight aggregate made from sewage sludge and river sediment10.1016/j.jallcom.2018.03.216 ↗
17. Developing and classifying lightweight aggregates from sewage sludge and rice husk ash
18. Use of bottom ash and stone dust to make lightweight aggregate10.1016/j.conbuildmat.2015.09.036 ↗
19. Lightweight aggregates from mixtures of granite wastes with clay10.1016/j.jclepro.2016.01.017 ↗
20. Influence of various sodium salt species on formation mechanism of lightweight aggregates made from coal fly ash-based material10.1016/j.conbuildmat.2019.117890 ↗
21. Effect of SiO2–Al2O3–flux ratio change on the bloating characteristics of lightweight aggregate material produced from recycled sewage sludge10.1016/j.jhazmat.2005.10.035 ↗
22. Role of boric acid in synthesis and tailoring the properties of calcium aluminate phosphor10.1016/j.matchemphys.2006.03.003 ↗
23. Effect of prefiring and firing dwell times on the properties of artificial lightweight aggregates10.1016/j.conbuildmat.2013.11.099 ↗
24. Influence of burning temperature and cooling methods on strength of high carbon ferrochrome slag lightweight aggregate10.1016/j.conbuildmat.2015.04.045 ↗
25. Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash10.1016/j.resconrec.2004.05.004 ↗
26. Relationships between particle size and fracture energy or impact velocity required to fracture as estimated from single particle crushing10.1016/0032-5910(87)80030-X ↗
27. Determination of the tensile strength of rock by a compression test of an irregular test piece10.1016/0148-9062(66)90002-7 ↗
28. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts10.1016/S0032-5910(00)00231-X ↗
29. Mechanical properties of lightweight aggregates10.1016/j.jeurceramsoc.2013.05.013 ↗
30. Critical evaluation and thermodynamic optimization of the Na2O–FeO–Fe2O3–Al2O3–SiO2 system10.1016/j.jeurceramsoc.2016.06.021 ↗
31. Thermodynamic optimization of the K2O-Al2O3-SiO2 system10.1016/j.ceramint.2018.06.099 ↗
32. Mechanism of low temperature sintered high-strength ferric-rich ceramics using bauxite tailings10.1016/j.matchemphys.2019.121929 ↗
33. Study of carbon black oxidation behavior under different heating rates10.1007/s10973-014-4020-z ↗
34. Ma · 2013
35. Zhao · 2012