Effect of etching duration on roughness and wettability of different carbon steel substrates
Source abstract
Abstract
Abstract Surface chemistry and morphology play a significant role in affecting the wettability of engineering surfaces. To create functional surfaces that are hydrophobic or superhydrophobic, these properties must be understood and controllable. The purpose of this study is to understand the relationship between surface roughness and contact wettability. For this purpose, samples were prepared by using different steel alloys and etched at different etching durations in a mixed solution. The mixed solution for roughening process was prepared by keeping the molar ratio of nitric acid and hydrogen peroxide constant at 1:1, 1:2 respectively. The steel substrates were then immersed in another mixed solution of stearic acid and N, N′-dicyclohexylcarbodiimide in n-hexane (5 mmol/L) for 24 h to lower the surface energy of steel alloy surfaces after roughening step. The effects of the duration of chemical etching on surface roughness were evaluated by using profilometer and surface contact angles were measured using the sessile drop method. Surfaces were analyzed using scanning electron microscopy. Steel surfaces were changed from hydrophilic to hydrophobic/superhydrophobic. The obtained maximum contact angle was 168.36° for CK40 samples, 161.99° for CK22 samples, and 166.35° for St37 steel samples. The results of this study showed that the surface contact angle was very sensitive to the change of surface roughness, and wettability could be controlled by changing the surface roughness. In addition, the surface roughness values of steel substrates that exhibit superhydrophobic behavior varied according to the steel type.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Adhesion, Friction, and Surface Interactions · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Critical review: microbially influenced corrosion of buried carbon steel pipes10.1016/j.ibiod.2014.05.007 ↗
2. Corrosion problems and solutions in oil, gas, refining and petrochemical industry10.1515/kom-2017-0013 ↗
3. Corrosion preventive strategies as a crucial need for decreasing environmental pollution and saving economics10.2174/1877610801002010022 ↗
4. Zhang
5. Recent Advances in durability of superhydrophobic self-cleaning technology: a critical review10.1016/j.porgcoat.2019.105381 ↗
6. Self – cleaning superhydrophobic coatings: potential industrial applications10.1016/j.porgcoat.2018.12.008 ↗
7. Recent developments in air-trapped superhydrophobic and liquid-infused slippery surfaces for anti-icing application10.1016/j.porgcoat.2019.105373 ↗
8. A novel and facile approach to prepare self-cleaning yellow superhydrophobic polycarbonates10.1016/j.molliq.2017.10.028 ↗
9. Green and timesaving fabrication of a superhydrophobic surface and its application to anti-icing, self-cleaning and oil-water separation10.1016/j.surfcoat.2018.08.035 ↗
10. Fabrication of superhydrophobic coating via spraying method and its applications in anti-icing and anti-corrosion10.1016/j.apsusc.2016.07.138 ↗
11. Superhydrophobic materials and coatings: a review10.1088/0034-4885/78/8/086501 ↗
12. Lotus effect-based superhydrophobic surfaces: candle soot as a promising class of nanoparticles for self-cleaning and oil–water separation applications
13. Anti-frosting performance of sprayable superhydrophobic coating suitable for outdoor coil of air source heat pump10.1016/j.applthermaleng.2020.114967 ↗
14. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
15. Large contact angles of plant and animal surfaces [8]10.1038/155021a0 ↗
16. Characterization and distribution of water-repellent, self-cleaning plant surfaces10.1006/anbo.1997.0400 ↗
17. Pearl drops10.1209/epl/i1999-00548-y ↗
18. Influence of roughness achieved by periodic structures on the wettability of aluminum using direct laser writing and direct laser interference patterning technology10.1016/j.jmatprotec.2019.02.023 ↗
19. Fabrication of tunable superhydrophobic surfaces by nanosphere lithography10.1021/cm034696h ↗
20. Superhydrophobic surfaces fabricated by nanoimprint lithography10.1016/j.mee.2006.01.012 ↗
21. Superhydrophobic alumina surface based on stearic acid modification10.1016/j.apsusc.2010.11.143 ↗
22. High-temperature imprinting and superhydrophobicity of micro/nano surface structures on metals using molds fabricated by ultrafast laser ablation10.1016/j.jmatprotec.2016.05.009 ↗
23. Corrosion resistance of superhydrophobic film on aluminum alloy surface fabricated by chemical etching and anodization
24. Facile preparation of superhydrophobic copper surface by HNO 3 etching technique with the assistance of CTAB and ultrasonication10.1016/j.apsusc.2010.09.001 ↗
25. Fabrication of superhydrophobic surfaces on engineering material surfaces with stearic acid10.1016/j.apsusc.2007.08.039 ↗
26. A facile two-step approach to prepare superhydrophobic surfaces on copper substrates10.1039/C3TA15102F ↗
27. Sili · 2004 · 159
28. Qu · 2008 · 4185
29. Fabrication of superhydrophobic surfaces on engineering materials by a solution-immersion process10.1002/adfm.200600472 ↗
30. Some problems of surface roughness in electrochemical machining (ECM)10.1016/j.procir.2016.02.198 ↗
31. The lowest surface free energy based on −CF3 alignment10.1021/la981727s ↗
32. Fabricated via micro-etching and a growth process10.1039/C7RA03308G ↗
33. Fabrication of superhydrophobic Cu surfaces with tunable regular micro and random nano-scale structures by hybrid laser texture and chemical etching10.1016/j.jmatprotec.2011.02.007 ↗
34. Super-water-repellent fractal surfaces10.1021/la950418o ↗