journal article·2021-10

Effect of plastic deformation on the precipitation reaction in 2024 alloys

J.C. Guía-Tello, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, L.J. García-Hernández, J. Aguilar Santillán, I. Estrada-Guel, R. Martínez-Sánchez

Publisher page

Abstract

Abstract The plastic deformation effect on activation energy, transformed volume fraction, and Avrami exponent for the phase precipitation in a 2024 aluminum alloy was evaluated in this study. Differential scanning calorimetry characterization was carried out in deformed and non-deformed samples, focusing on the study of S phase precipitation (Al2CuMg precipitates with orthorhombic structure, space group Cmcm, and lattice parameters a = 4.03 A, b = 9.3 A, c = 7.08 A). The results show that the solid-state reactions were activated, kinetically controlled, and modified by the plastic deformation. The enthalpy changes, activation energy, and peak temperature shifting confirm that the applied deformation alters the reaction sequence. Two different Avrami exponent values were found, one close to 1.7, which indicates that nucleation occurs in preexisting nucleation sites, and the other near 1.3, which corresponds to phase transformation driven by diffusion mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics10.1179/095066004225010532 ↗
2. Calorimetric studies of 2024 Al–Cu–Mg and 2014 Al–Cu–Mg–Si alloys of various tempers10.1007/s10973-018-7702-0 ↗
3. Localized corrosion mechanism of 2xxx-series Al alloy containing S (Al2CuMg) and θ' (Al2Cu) precipitates in 4.0% NaCl solution at pH 6.110.1016/j.matchemphys.2004.11.034 ↗
4. Rapid precipitation of T-phase in the 2024 aluminum alloy via cyclic electropulsing treatment10.1016/j.jallcom.2014.05.063 ↗
5. Structure of age-hardened aluminium-copper alloys10.1038/142569b0 ↗
6. The diffraction of X-rays by an age-hardening alloy of aluminium and copper. The structure of an intermediate phase10.1080/14786443808562177 ↗
7. Starink, Two types of S phase precipitates in Al–Cu–Mg alloys10.1016/j.actamat.2006.09.015 ↗
8. A phenomenological hardening model for an aluminium-lithium alloy10.1016/j.ijplas.2019.02.009 ↗
9. A conventional thermo-mechanical process of Al-Cu-Mg alloy for increasing ductility while maintaining high strength10.1016/j.scriptamat.2010.10.037 ↗
10. 2018
11. 2018
12. The kinetics of precipitation in Al-2.4 wt % Cu alloy by Kissinger, Ozawa, Bosswel and Matusita methods10.1016/j.physb.2011.03.053 ↗
13. Reaction kinetics in processes of nucleation and growth
14. Granulation phase change and microstructure: kinetics of phase change (III)10.1063/1.1750872 ↗
15. Influence of Mg contents on aging precipitation behavior of Al–3.5Cu–xMg Alloy10.1007/s40195-014-0033-7 ↗
16. Precipitation in Al–Cu–Mg alloy during creep exposure10.1016/j.msea.2012.07.069 ↗
17. In-situ STEM imaging of growth and phase change of individual CuAlX precipitates in Al alloy
18. Calorimetric study on precipitation path in 2024 alloy and its SiC composite10.1016/0921-5093(94)09637-C ↗
19. Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging10.1016/j.jallcom.2019.05.001 ↗
20. Calorimetric studies of precipitation and dissolution kinetics in aluminum alloys 2219 and 707510.1007/BF02642389 ↗