journal article·2021-10

Characterization of properties of Vanadium, Boron and Strontium addition on HPDC of A360 alloy

Ozen Gursoy, Murat Colak, Kazim Tur, Derya Dispinar

Publisher page

Abstract

Abstract The demand for lighter weight decreased thickness and higher strength has become the focal point in the automotive industry. In order to meet such requirements, the addition of several alloying elements has been started to be investigated. In this work, the additions of V, B, and Sr on feedability and tensile properties of A360 has been studied. A mold design that consisted of test bars has been produced. Initially, a simulation was carried out to optimize the runners, filling, and solidification parameters. Following the tests, it was found that V addition revealed the highest UTS but low elongation at fracture, while B addition exhibited visa verse. On the other hand, impact energy was higher with B additions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Johanson · 2013
2. Grain refining of aluminium and its alloys using inoculants10.1179/imr.1989.34.1.247 ↗
3. Di Giovanni · 2014
4. The effect of Ni and V trace elements on the mechanical properties of A356 aluminium foundry alloy in as-cast and T6 heat treated conditions10.1016/j.msea.2014.05.059 ↗
5. Impact behavior of A356 foundry alloys in the presence of trace elements Ni and V10.1007/s11665-014-1355-3 ↗
6. Influence of some trace elements on solidification path and microstructure of Al-Si foundry alloys10.1007/s11661-013-1694-y ↗
7. Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additions10.1016/j.msea.2011.07.018 ↗
8. “Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al–Si–Mg alloy10.1016/j.msea.2014.02.053 ↗
9. Dæhlen · 2013
10. Effects of vanadium on modification of iron-rich intermetallics and mechanical properties in A356 cast alloys with 1.5 wt.% Fe10.1007/s11665-018-3798-4 ↗
11. Grain refinement of hypoeutectic Al-Si foundry alloys by addition of boron containing silicon metal
12. Grain refinement of hypoeutectic Al-Si alloys with B10.1016/j.actamat.2016.08.045 ↗
13. “Grain refining potency of Al–B master alloy on pure aluminum10.1016/j.scriptamat.2011.03.001 ↗
14. Effect of titanium and boron on the stability of grain refinement of Al-Cu alloy10.1515/afe-2016-0045 ↗
15. Ti grain refinement myth and cleanliness of A356 melt
16. Influence of hydrogen content and bi-film index on feeding behaviour of Al-7Si
17. Observation of hot tearing in Sr-B modified A356 alloy10.1515/afe-2017-0151 ↗
18. “Preparation of a novel Al–3B–5Sr master alloy and its modification and refinement performance on A356 alloy10.1016/j.jallcom.2014.06.205 ↗
19. Revisiting the role of peritectics in grain refinement of Al alloys10.1016/j.actamat.2012.09.075 ↗
20. Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels10.1016/j.matchemphys.2020.122847 ↗
21. Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels10.1016/j.jmapro.2019.08.029 ↗
22. Grain boundary accommodation of slip in Ni3Al containing boron10.1016/0001-6160(86)90027-1 ↗
23. The effect of boron on the chemistry of grain boundaries in stoichiometric Ni3Al10.1080/13642818808208510 ↗
24. Influences of nickel and vanadium impurities on microstructure of aluminum alloys
25. Effect of vanadium and zirconium on the formation of CrAI 7 primary crystals in 7075 aluminum alloy10.1007/BF02658642 ↗
26. The role of Cr additions and Fe-rich compounds on microstructural features and impact toughness of AlSi9Cu3 (Fe) diecasting alloys10.1016/j.msea.2014.02.071 ↗
27. Effect of ranking selection on the Weibull modulus estimation
28. “The effect of transition elements on high‐temperature mechanical properties of Al–Si foundry alloys–A review10.1002/adem.201500468 ↗