Achievement of high infrared photoresponse in n-MoO3/p-Si heterostructure photodiode prepared via the thermal oxidation method, the influence of oxygen flow rate
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. High performance MoO3-x/Si heterojunction photodetectors with nanoporous pyramid Si arrays for visible light communication application10.1039/C8TC05850D ↗
2. Upgraded photosensitivity under the influence of Yb doped on V2O5 thin films as an interfacial layer in MIS type Schottky barrier diode as photodiode application10.1016/j.jssc.2021.122289 ↗
3. Study of the morphological, optical, structural and electrical properties of silicon nanowires at varying concentrations of the catalyst precursor10.1039/D1MA01145F ↗
4. Transition metal oxides-Thermoelectric properties10.1016/j.pmatsci.2013.06.003 ↗
5. Evidence of oxygen vacancy and possible intermediate gap state in layered α-MoO3 single-crystal nanobelts10.1016/j.physb.2015.11.013 ↗
6. The (010) surface of α-MoO3, a DFT+U study10.1039/b511044k ↗
7. Deposition temperature effect of RF magnetron sputtered molybdenum oxide films on the power conversion efficiency of bulk heterojunction solar cells10.1088/0022-3727/44/4/045101 ↗
8. Influence of sputtering power on the physical properties of magnetron sputtered molybdenum oxide films10.1007/s10854-009-9867-6 ↗
9. Structural, optical and electrical properties of Ru doped MoO3 thin films and its P–N diode application by JNS pyrolysis technique10.1007/s10854-016-5300-0 ↗
10. Layered molybdenum oxide thin films electrodeposited from sodium citrate electrolyte solution10.1007/s10008-010-1137-2 ↗
11. Effect of temperature of annealing on optical, structural and electrochromic properties of sol–gel dip coated molybdenum oxide films10.1016/j.apsusc.2010.09.052 ↗
12. Structural and optical properties of nanocrystalline α-MoO3 thin films prepared at different annealing temperatures10.1007/s40094-014-0161-5 ↗
13. Influence of thermal oxidation temperatures on the structural and morphological properties of MoO3 thin films10.12693/APhysPolA.123.307 ↗
14. Synthesis of α-MoO3 nano-flakes by dry oxidation of RF sputtered Mo thin films and their application in gas sensing
15. Low-resistance orthorhombic MoO3-x thin film derived by two-step annealing10.1016/j.tsf.2018.09.017 ↗
16. MoO3/nano–Si heterostructure based highly sensitive and acetone selective sensor prototype: a key to non-invasive detection of diabetes10.1088/1361-6528/aabcef ↗
17. Controlling n-type doping in MoO310.1021/acs.chemmater.6b04479 ↗
18. The dielectric studies on sol–gel routed molybdenum oxide thin film
19. Synthesis of β-MoO3 through evaporation of HNO3-added molybdic acid solution and its catalytic performance in partial oxidation of methanol10.1016/j.apcata.2007.04.006 ↗
20. A study of the nature of the oxidant in V2O5-MoO3/Al2O3 catalyst10.1016/S0009-2509(01)00262-7 ↗
21. Fast synthesis of α-MoO3 nanorods with controlled aspect ratios and their enhanced lithium storage capabilities10.1021/jp1017482 ↗
22. Gas sensing properties of PLD made MoO3 films10.1016/S0925-4005(03)00342-3 ↗
23. Structural and optical properties of MoO3 and V2O5 thin films prepared by Spray Pyrolysis10.1016/j.cattod.2005.11.072 ↗
24. Impact of Cu concentration on the properties of spray coated Cu-MoO3 thin films: evaluation of n-CuMoO3/p-Si junction diodes by JV, Norde and Cheung's methods10.1088/2053-1591/ab361d ↗
25. Self-powered, high-speed and visible–near infrared response of MoO3–x/n-Si heterojunction photodetector with enhanced performance by interfacial engineering10.1021/acsami.5b09492 ↗
26. A flexible ultraviolet photodetector based on single crystalline MoO3 nanosheets10.1039/C5TC00850F ↗
27. Ultra-high photoresponse with superiorly sensitive metal-insulator-semiconductor (MIS) structured diodes for UV photodetector application10.1016/j.apsusc.2019.02.214 ↗
28. A Facile Synthesis for studying the effect of molar concentration on structural, morphological and optical behaviour of MoO3 thin films using jet nebulizer spray pyrolysis technique for n-MoO3/p-Si photodiode application10.14233/ajchem.2021.23418 ↗
29. Reactive-sputtered transparent MoO3 film for high-performing infrared Si photoelectric devices10.1016/j.sna.2018.01.041 ↗
30. Effect of the substrate temperature on the physical properties of molybdenum tri-oxide thin films obtained through the spray pyrolysis technique10.1016/j.matchar.2012.11.002 ↗
31. Substrate temperature influenced structural, electrical and optical properties of dc magnetron sputtered MoO3 films10.1016/j.apsusc.2009.11.086 ↗
32. Evidence of oxygen vacancy and possible intermediate gap state in layered α-MoO3 single-crystal nanobelts10.1016/j.physb.2015.11.013 ↗
33. X-ray analysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
34. Dielectric relaxation of ZnO nanostructure synthesized by soft chemical method10.1016/j.cap.2009.08.015 ↗
35. Barrier-controlled electron transport in Sn-doped ZnO polycrystalline thin films10.1016/j.tsf.2012.09.006 ↗
36. Influence of grain boundaries on the figure of merit of undoped and Al, In, Sn doped ZnO thin films for photovoltaic applications10.1016/j.scriptamat.2015.10.004 ↗
37. The influence of Cu2O crystal structure on the Cu2O/ZnO heterojunction photovoltaic performance10.1016/j.spmi.2015.07.010 ↗
38. Raman spectroscopy of molybdenum oxides, Part I. Structural characterization of oxygen defects in MoO3− x by DR UV/VIS, Raman spectroscopy and X-ray diffraction10.1039/b107012f ↗
39. Characteristics of MoO3 films grown by molecular beam epitaxy10.7567/JJAP.53.05FJ02 ↗
40. Development of hierarchical layered nanostructured α-MoO3 thin films using dc magnetron sputtering10.1088/2053-1591/3/10/106405 ↗
41. Study of the photochromic properties of amorphous MoO3 films using Raman microscopy10.1021/j100044a028 ↗
42. Characteristics of molybdenum trioxide nanobelts prepared by thermal evaporation technique10.1016/j.matchemphys.2008.10.018 ↗
43. Physical investigations on MoO3 sprayed thin film for selective sensitivity applications10.1016/j.ceramint.2014.05.062 ↗
44. Characteristics of molybdenum trioxide nanobelts prepared by thermal evaporation technique10.1016/j.matchemphys.2008.10.018 ↗
45. Post-deposition annealed MoO3 film based high performance MSM UV photodetector fabricated on Si (100)10.1016/j.ceramint.2020.05.150 ↗
46. Fabrication and characterization of high performance MSM UV photodetector based on NiO film10.1016/j.sna.2017.05.028 ↗
47. Effects of substrate temperature on the degradation of RF sputtered NiO properties10.1016/j.mssp.2017.02.017 ↗
48. Structural, morphological, optical and electrical properties of NiO films prepared on Si (100) and glass substrates at different thicknesses10.1088/2053-1591/3/11/116405 ↗
49. Growth and characterization of molybdenum oxide thin films prepared by photochemical metal–organic deposition (PMOD)10.1016/j.poly.2010.01.036 ↗
50. Germanium-gallium arsenide heterojunctions10.1147/rd.43.0283 ↗
51. Role of substrate temperature on MoO3 thin films by the JNS pyrolysis technique for P-N junction diode application10.1016/j.mssp.2015.12.009 ↗
52. GZO/Si photodiodes exhibiting high photocurrent-to-dark-current ratio10.1109/TED.2019.2903600 ↗
53. Fabrication, temperature dependent current-voltage characteristics and photoresponse properties of Au/α-PbO2/p-Si/Al heterojunction photodiode10.1016/j.mssp.2016.11.015 ↗
54. Effect of annealing temperature on the electrical and structural properties of V/p-GaN Schottky structures10.1016/j.tsf.2015.12.018 ↗
55. Morphological and electrical characterization of SiNWs synthesized by electroless metal assisted chemical etching method10.21272/jnep.13(2).02003 ↗
56. Structural and morphological properties of annealed MoO3 films on different substrates10.1142/S0218625X19501506 ↗
57. Preparation and characterization of p-Ag2O/n-Si heterojunction devices produced by rapid thermal oxidation10.1016/j.egypro.2012.05.041 ↗
58. Preparation and photovoltaic properties of Ag2O/Si isotype heterojunction10.1142/S0218625X05007074 ↗
59. The electrical properties and the interfaces of Cu2O/ZnO/ITO p–i–n heterojunction10.1016/j.physb.2004.06.003 ↗
60. Influence of Annealing Temperature on the Properties of Molybdenum Oxide nanoparticles prepared through Chemical precipitation method for p-n junction diode application10.1016/j.ijleo.2018.09.020 ↗
61. Synthesis of single-phase MoO3-nanoparticles using various acids for the fabrication of n-MoO3/p-Si junction diode10.1007/s10904-021-01985-4 ↗
62. Sze · 2008
63. Gap states assisted MoO3 nanobelt photodetector with wide spectrum response10.1038/srep04891 ↗
64. A flexible ultraviolet photodetector based on single crystalline MoO3 nanosheets10.1039/C5TC00850F ↗
65. Structural and electrochemical characterization of α-MoO3 nanorod-based electrochemical energy storage devices10.1016/j.electacta.2010.09.028 ↗
66. Thermally stable silver nanowires-embedding metal oxide for Schottky junction solar cells10.1021/acsami.5b12732 ↗