journal article·2021-07

Characterization of functionalized coatings prepared from pulsed plasma polymerization

Marisol Ji, Andrea Jagodar, Eva Kovacevic, Lazhar Benyahia, Fabienne Poncin-Epaillard

Publisher page

Abstract

Abstract Material assembly based on elastomer part and metallic substrate has been widely used in many industrial sectors. However, the adhesion between the two materials requests specific processes and adhesives. Plasma technology is an interesting way to prepare the assembly since the plasma polymer layers used for the adhesive joint can bear different reactive chemical functions toward the elastomer. Three different plasma coatings are synthesized from acetylene, acrylic acid, and maleic anhydride plasma because of their respective chemical functions able to open the carbon-carbon double bond of the elastomer (rubber, fluoroelastomer). For such a purpose, fine-tuning of plasma parameters was essential to preserve the precursor chemistry and to avoid any degradation. Pulsed plasma discharge was selected, plasma parameters defined thanks to the design of experiment. The different plasma polymers were characterized by FTIR, XPS and NEXAFS spectroscopies and surface energy measurement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Bonding of silicone rubbers on metal (2) physical chemistry of adhesion10.1016/j.porgcoat.2015.03.020 ↗
2. Yasuda · 1985
3. Chemical interaction, adhesion and diffusion properties at the interface of Cu and plasma-treated thiophene-based plasma polymer (ThioPP) films10.1016/S0040-6090(01)01372-4 ↗
4. Effects of monomer flow rate, flow configuration, and reactor geometry on the rate of plasma polymerization10.1080/00222337608061195 ↗
5. Study of the effect of process parameters for N-heptylamine plasma polymerization on final layer properties10.1016/j.tsf.2007.02.002 ↗
6. Mid-frequency deposition of a-C:H films using five different precursors10.1016/j.vacuum.2010.10.006 ↗
7. Controlled dust formation in pulsed rf plasmas10.1063/1.3224874 ↗
8. Plasma chemical vapor deposition of hydrocarbon films: the influence of hydrocarbon source gas on the film properties10.1063/1.371318 ↗
9. Deposition of amorphous hydrogenated carbon films on steel surfaces through the enhanced asymmetrical modified bipolar pulsed-DC PECVD method10.1016/j.surfcoat.2014.09.046 ↗
10. A comparative analysis of a-C:H films deposited from five hydrocarbons by thermal desorption spectroscopy10.1016/j.vacuum.2011.07.037 ↗
11. Possible solution to the problem of high built-up stresses in diamond-like carbon films10.1063/1.369758 ↗
12. Some aspects of plasma polymerization investigated by pulsed R.F. discharge10.1002/pol.1977.170150109 ↗
13. Study of plasma polymerization from acetylene in pulsed r.f. discharges10.1016/S0040-6090(02)01133-1 ↗
14. A multi-technique investigation of the pulsed plasma and plasma polymers of acrylic acid: millisecond pulse regime10.1021/jp012406j ↗
15. Characterization of thin-film deposition in a pulsed acrylic acid polymerizing discharge10.1116/1.2712186 ↗
16. Using heated probes in plasma polymerising discharges10.1016/j.surfcoat.2003.10.005 ↗
17. Time-resolved electric probe measurements in the pulsed-plasma polymerisation of acrylic acid10.1016/j.surfcoat.2004.05.013 ↗
18. ime-resolved mass and energy spectral investigation of a pulsed polymerising plasma struck in acrylic acid10.1016/j.surfcoat.2005.12.031 ↗
19. Use of Different size grids to control the surface chemistry of plasma-polymerized acrylic acid films in a hybrid discharge10.1002/app.25471 ↗
20. Controlled monomolecular functionalization and adhesion of solid surfaces10.1021/cm000223o ↗
21. Pulsed plasma deposited maleic anhydride thin films as supports for lipid bilayers10.1021/la991649o ↗
22. Diels-alder chemistry on alkene functionalized films10.1021/la0479657 ↗
23. Chemical structure and properties of plasma-polymerized maleic anhydride film10.1021/cm011139r ↗
24. Pulsed plasma polymerization of maleic anhydride10.1021/cm9503691 ↗
25. Advanced applications of NEXAFS spectroscopy for functionalized surfaces
26. Size dependent characteristics of plasma synthesized carbonaceous nanoparticles10.1063/1.4731751 ↗
27. Study of influence of external plasma parameters on plasma polymerised films prepared from organic molecules (acrylic acid, allyl alcohol, allyl amine) using XPS and NEXAFS10.1016/j.surfcoat.2005.01.083 ↗
28. In situ Raman spectroscopy for growth monitoring of vertically aligned multiwall carbon nanotubes in plasma reactor10.1063/1.4902915 ↗
29. NEXAFS Spectroscopy, Springer Series in Surface Sciences 1992 [30] D. Debarnot, T. Mérian, F. Poncin-Epaillard, Effect of fluorine substitution of aniline ring on pulsed plasma polymer growth and Structure
30. Film chemistry control and growth kinetics of pulsed plasma-polymerized aniline10.1007/s11090-010-9271-2 ↗
31. Plasma codeposition of transparent thin film: relationship between surface chemistry and anti-fogging property10.1002/ppap.201900070 ↗
32. Cold plasma treatment of polypropylene surface: a study on wettability and adhesion10.1016/S0924-0136(01)01221-3 ↗
33. Plasma Copolymerization of fluorinated and acrylate monomers: kinetics and chemical Structure Study10.1002/ppap.201400128 ↗
34. The effect of frequency on the plasma polymerization of ethane10.1002/pol.1979.170170914 ↗
35. Influence of plasma duty cycle during plasma polymerization in adhesive bonding10.1016/j.ijadhadh.2011.05.003 ↗
36. Design of experiment for optimization of plasma-polymerized octafluorocyclobutane coating on very high aspect ratio silicon molds10.1021/la061334q ↗
37. Optimization of acrylic acid grafting onto POSS-PCU nanocomposite using response surface methodology
38. Chemometric investigation of the effect of the process parameters during maleic anhydride pulsed plasma polymerization10.1016/j.aca.2005.02.072 ↗
39. Fabrication, characterization, and comparison of oxygen‐rich organic films deposited by plasma‐ and vacuum‐ultraviolet (VUV) photo‐polymerization10.1002/ppap.201400146 ↗
40. Biederman · 2004
41. Chemical analysis of plasma-polymerized films: the application of X-Ray photoelectron spectroscopy (XPS), X-Ray absorption spectroscopy (NEXAFS) and fourier transform infrared spectroscopy (FTIR)10.1016/S0368-2048(01)00330-9 ↗
42. Characterization of amorphous carbon films by PECVD and plasma ion implantation: the role of fluorine and sulfur doping10.1016/j.matchemphys.2019.02.008 ↗
43. VUV photodeposition of thiol-terminated films: a wavelength-dependent study10.1021/acs.langmuir.8b01691 ↗
44. Pulsed plasmachemical deposition of polymeric salt networks10.1016/j.polymer.2005.06.123 ↗
45. Plasma-based introduction of monosort functional groups of different type and density onto polymer surfaces. Part 2: pulsed plasma polymerization10.1163/156855403765826874 ↗
46. Rf Plasma-Polymerization of Acetylene: correlation between plasma diagnostics and deposit characteristics10.1016/j.surfcoat.2006.10.025 ↗
47. Structure of plasma poly(acrylic acid): influence of pressure and dielectric properties10.1007/s11090-014-9603-8 ↗
48. Beamson · 1992
49. PE-CVD of organic thin films with controlled surface concentration of carboxylic groups10.1023/A:1021896808872 ↗
50. Functionalization of poly(ethylene terephthalate) film by pulsed plasma deposition of maleic anhydride10.1002/adfm.200304384 ↗
51. Synchrotron-based spectroscopic analysis of diamond-like carbon films from different source gases10.1016/j.radphyschem.2020.108944 ↗
52. Adsorption of acrylic acid on aluminum at 300 K: A multi-spectroscopic study10.1016/0039-6028(95)01138-2 ↗
53. Study of influence of external plasma parameters on plasma polymerised films prepared from organic molecules (Acrylic acid, allyl alcohol, allyl amine) using XPS and NEXAFS10.1016/j.surfcoat.2005.01.083 ↗
54. Adsorption of maleic anhydride on Si(100)-2×110.1016/S0039-6028(01)00775-0 ↗
55. Reactivity of ZnO surfaces toward maleic anhydride10.1021/jp048386d ↗
56. The influence of gas flow rate on the structural, mechanical, optical and wettability of diamond-like carbon thin films10.1007/s11082-018-1456-6 ↗
57. Deposition of plasma-polymerized polyacrylic acid coatings by a non-equilibrium atmospheric pressure nanopulsed plasma jet10.1002/ppap.201500080 ↗
58. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
59. A bottom-up and templateless process for the elaboration of plasma-polymer nanostructures10.1002/ppap.201500014 ↗