journal article·2020-07

Influence of phosphate ions on pit initiation and growth on the stainless steel – 316L in chloride contaminated simulated coal gasification wastewater (CGW) environment

Adnan Munis, Maosheng Zheng, Tianyu Zhao

Publisher page

Abstract

Abstract The influence of phosphate ions on the pitting corrosion of stainless steel type 316L was investigated with electrochemical and thermo-chemical methods. DC polarization measurements showed that the pitting could occur spontaneously above 72 °C on SS-316L in chloride containing simulated coal gasification waste water (CGW). Addition of phosphate ions above critical pitting temperature (CPT) in the simulated CGW retarded the oxygen reduction reactions, reduced the pitting frequency and impeded the pitting growth considerably. EIS study revealed that the PO43− ions enhanced the pitting resistance of SS-316L by absorbing and modifying the passive film through the interaction with the hydrated Fe species. XRD analysis of SS-316L surface exposed in simulated CGW containing PO43− ions at 170 °C further confirmed the existence of iron phosphate in the surface corrosion layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Treatment of Lurgi coal gasification wastewater in pre-denitrification anaerobic and aerobic biofilm process10.1016/j.jece.2013.07.033 ↗
2. Wang · 2017 · 357
3. Simultaneous removal of phenol, ammonium and thiocyanate from coke wastewater by aerobic biodegradation10.1016/j.jhazmat.2006.05.018 ↗
4. Stress corrosion cracking of stainless steels in high temperature caustic solutions10.1016/S0010-938X(97)88507-1 ↗
5. Study of corrosion–erosion behavior of stainless alloys in industrial phosphoric acid medium10.1016/j.apsusc.2006.05.005 ↗
6. Effects of thiosulphates and sulphite ions on steel corrosion10.1016/j.corsci.2018.02.046 ↗
7. Corrosion behavior of X-70 pipe steel in crude oil environments depending upon surface characteristics10.1007/s13369-014-1102-y ↗
8. Orr · 2000
9. Effect of sulfate and meta-silicate ions on pitting corrosion of stainless steel-316 in chloride containing simulated coal gasifier aqueous effluents10.1088/2053-1591/ab160e ↗
10. The crevice corrosion behaviour of stainless steel in sodium chloride solution10.1016/j.corsci.2011.08.012 ↗
11. Hirano · ISIJ. Int. Accelerated Corrosion Behavior due to Alternating Dry-Wet Conditions for LP Steam Turbine Materials of Fossil Power Plants · 2005 · 45 · 373
12. A Round Robin on combined electrochemical and AES/ESCA characterization of the passive films on FeCr and Fe-Cr-Mo alloys10.1016/0010-938X(88)90026-1 ↗
13. The role of chloride ions in pitting of carbon steel studied by the statistical analysis of electrochemical noise10.1016/S0169-4332(99)00328-1 ↗
14. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
15. Inhibition of steel pitting corrosion in HCl by some inorganic anions10.1016/j.apsusc.2004.07.014 ↗
16. Investigation on the effect of nitrate ion on the critical pitting temperature of 2205 duplex stainless steel along a mechanistic approach using pencil electrode10.1016/j.corsci.2014.04.021 ↗
17. Effects of NO2− ions on localised corrosion of steel in NaHCO3 + NaCl electrolytes10.1016/j.electacta.2006.12.040 ↗
18. Effect of Cl− and SO42− on pitting corrosion susceptibility for materials of low-pressure steam turbines in power plants10.2320/jinstmet.74.635 ↗
19. Effect of chloride and sulfate ions in simulated boiler water on pitting corrosion behavior of 13Cr steel10.1016/j.corsci.2015.04.005 ↗
20. Corrosion protection of steel reinforcement by a pretreatment in phosphate solutions: assessment of passivity by electrochemical techniques10.1179/174327806X120775 ↗
21. Influence of phosphate on corrosion products of iron in chloride-polluted-concrete-simulating solutions: ferrihydrite vs green rust10.5006/1.3277637 ↗
22. Corrosion inhibition mechanism of phosphates for early-age reinforced mortar in the presence of chlorides10.1016/j.cemconcomp.2015.04.009 ↗
23. Corrosion inhibition of carbon steel in alkaline chloride media by Na3PO410.1016/j.electacta.2007.03.003 ↗
24. Effects of phosphate species on localized corrosion of steel in NaHCO3 + NaCl electrolytes10.1016/j.electacta.2009.03.014 ↗
25. Phosphate ions as corrosion inhibitors for reinforcement steel in chloride-rich environments10.1016/j.electacta.2013.03.180 ↗
26. Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution10.1016/j.conbuildmat.2013.08.054 ↗
27. Effect of temperature on passive film formation of UNS N08031 Cr–Ni alloy in phosphoric acid contaminated with different aggressive anions10.1016/j.electacta.2013.08.040 ↗
28. Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures10.1016/j.corsci.2011.11.014 ↗
29. The effects of some anions on metastable pitting of 316L stainless steel10.1016/S0010-938X(01)00031-2 ↗
30. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1 M NaCl at various molybdate concentrations10.1016/j.corsci.2010.08.008 ↗
31. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
32. In situ monitoring of crevice corrosion morphology of Type 316L stainless steel and repassivation behavior induced by sulfate ions10.1016/j.corsci.2017.08.005 ↗
33. Mechanism of corrosion inhibition by sodium molybdate10.1016/0011-9164(96)00148-8 ↗
34. Corrosion behaviour of 316L stainless steel and anti-corrosion materials in a high acidified chloride solution10.1016/j.apsusc.2014.09.205 ↗
35. Temperature effect in the corrosion resistance of Ni–Fe–Cr alloy in chloride medium10.1016/j.corsci.2008.06.030 ↗
36. The effect of temperature (25°–289°C) on pit initiation in single phase and duplex 304L stainless steels in 100 ppm Cl− solution10.1016/0010-938X(80)90074-8 ↗
37. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
38. Dependence of the critical pitting temperature on surface roughness10.1016/S0010-938X(02)00215-9 ↗
39. The pitting behavior of iron‐chromium thin film alloys in hydrochloric acid10.1149/1.1838519 ↗
40. Pitting corrosion of metals: a review of the critical factors10.1149/1.1838615 ↗
41. Theoretical and experimental studies of the pitting of type 316L stainless steel in borate buffer solution containing nitrate ion10.1016/j.electacta.2006.07.052 ↗
42. Sudden onset of pitting corrosion on stainless steel as a critical phenomenon10.1126/science.1101358 ↗
43. Perspective—localized corrosion: passive film breakdown vs pit growth stability10.1149/2.1381704jes ↗
44. The effects of some anions on metastable pitting of 316L stainless steel10.1016/S0010-938X(01)00031-2 ↗
45. The metastable pitting potential and its relation to the pitting potential for four materials in chloride solutions10.1016/j.corsci.2013.11.015 ↗
46. The kinetics of iron dissolution and passivation in solutions containing oxygen10.1016/0013-4686(80)87026-5 ↗
47. Oxygen reduction reaction at rust free iron surface in neutral unbuffered chloride solution10.1016/S0010-938X(01)00078-6 ↗
48. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy10.1016/j.corsci.2010.07.013 ↗
49. A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions10.1016/j.corsci.2008.06.029 ↗
50. The effect of temperature on the passive film properties and pitting behavior of a FeCrNi alloy10.1016/0010-938X(96)00176-X ↗
51. The role of surface inhomogeneities in corrosion processes-electrochemical impedance spectroscopy (EIS) on different aluminium oxide films10.1016/0010-938X(89)90036-X ↗
52. Some aspects of corrosion and film formation of austenitic stainless steel type 316LN using electrochemical impedance spectroscopy (EIS)10.1007/s10853-006-0476-y ↗
53. Evgenij · 2005
54. Mark · 2008
55. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
56. Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution10.1016/j.electacta.2013.02.024 ↗
57. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride10.1016/j.corsci.2010.11.010 ↗
58. Electrochemical assessing corrosion inhibiting effects of zinc aluminum polyphosphate (ZAPP) as a modified zinc phosphate pigment10.1016/j.electacta.2008.03.029 ↗
59. Study of copper dissolution and passivation processes by electrochemical impedance spectroscopy10.5006/1.3279875 ↗
60. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
61. Characterization of high-temperature oxide films on stainless steels by electrochemical-impedance spectroscopy10.1023/A:1018856808917 ↗
62. Ellipsometric study of the formation of films on iron in orthophosphate solutions10.1149/1.2401696 ↗
63. The bi-layer structure and the higher compactness of a passive film on nanocrystalline 304 stainless steel10.1016/j.tsf.2015.12.039 ↗
64. Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution10.1016/j.apsusc.2016.08.074 ↗
65. The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides10.1016/j.electacta.2011.02.094 ↗
66. Investigations on the passivity of iron in borate and phosphate buffers, pH 8.410.1016/j.corsci.2005.12.008 ↗
67. Characterization of the passive state on zinc10.1149/1.1838777 ↗
68. A new method for estimating the diffusivities of vacancies in passive films10.1016/0013-4686(95)00312-6 ↗
69. The effect of the Cl− ion on the passive film on anodically polarized 304 stainless steel10.1016/0010-938X(80)90002-5 ↗
70. Study of passive films formed on AISI 304 stainless steel by impedance measurements and photoelectrochemistry10.1149/1.2086444 ↗
71. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
72. Constant-phase-element behavior caused by resistivity distributions in films: II. Applications10.1149/1.3499565 ↗
73. Influence of bovine serum albumin in sulphuric acid aqueous solution on the corrosion and the passivation of an iron–chromium alloy10.1016/j.electacta.2005.02.116 ↗
74. Perforated covers for propagating pits10.1149/1.1838423 ↗
75. The influence of the interfacial conditions on rust conversion by phosphoric acid10.1016/S0010-938X(97)00058-9 ↗
76. Characterization of epitaxial films by grazing-incidence X-ray diffraction10.1016/0040-6090(87)90349-X ↗
77. Effect of indium doping on Ge2Sb2Te5 thin films for phase-change optical storage10.1007/s00339-005-3232-2 ↗
78. Electrochemical and surface analysis studies on the carbon dioxide corrosion of X-65 carbon steel10.1002/elan.201600309 ↗
79. High-temperature potential/pH diagrams for the iron—water and iron—water—sulphur systems10.1016/0013-4686(72)80013-6 ↗
80. Corrosion protection of stainless steel by polyaniline electrosynthesized from phosphate buffer solutions10.1016/S0300-9440(03)00075-4 ↗
81. Effect of fluoride on corrosion behavior of UNS N08904 stainless steel in polluted phosphoric acid10.1016/j.molliq.2018.06.008 ↗