Highly effective Cu doped SrTiO3 as a cathode driven by oxygen vacancies and redox of Ti4+/Ti3+ and Cu2+/Cu+ for rechargeable alkaline zinc batteries
Source abstract
Abstract
There is great demand for environmental concerns and explosion hazard batteries. Rechargeable alkaline zinc batteries (RAZBs) have gained significant attention due to their exceptional characteristics such as affordability, safety features, and high theoretical gravimetric capacity. However, practically RAZBs still exhibit poor capacities and limited rechargeability. In this study, copper-doped SrTiO3 (Cu-STO) was successfully synthesized via facile hydrothermal method to be used as a cathode in RAZBs. The capacity of RZABs has enhanced up to 208 mAh g−1 (0.2 A g−1) or 1.5 folds as compared to that of pristine SrTiO3. This is attributed to the presence of oxygen vacancies (Vö) which facilitate the activation of redox-active sites involving Ti4+/Ti3+ and Cu2+/Cu+ ions. Moreover, the fast ions diffusion and good conductivity enable high capacity and rechargeability. Thus, RAZBs showed good rechargeability even after 1000 cycles under 1 A g−1. This provides the underlying potential of Cu-STO as cathode in RAZBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Ultra-dispersed nickel-cobalt sulfides on reduced graphene oxide with improved power and cycling performances for nickel-zinc batteries10.1016/j.jcis.2021.08.193 ↗
2. Decoupling electrolytes towards stable and high-energy rechargeable aqueous zinc–manganese dioxide batteries10.1038/s41560-020-0584-y ↗
3. Multifold electrochemical protons and zinc ion storage behavior in copper vanadate cathodes10.1021/acsaem.1c02075 ↗
4. Manipulating nickel oxides in naturally derived cellulose nanofiber networks as robust cathodes for high-performance Ni-Zn batteries10.1039/C9TA09006A ↗
5. Recent advances of transition metal Sulfides/Selenides cathodes for aqueous Zinc-Ion batteries10.1002/aenm.202202992 ↗
6. Rechargeable alkaline zinc batteries: progress and challenges10.1016/j.ensm.2020.05.028 ↗
7. Crossroads in the renaissance of rechargeable aqueous zinc batteries10.1016/j.mattod.2020.12.003 ↗
8. Rechargeable alkaline zinc-manganese oxide batteries for grid storage: mechanisms, challenges, and developments10.1016/j.mser.2020.100593 ↗
9. Bio-inspired interface engineering of Ag2O rooted on Au, Ni-modified filter paper for highly robust Zn-Ag2O batteries10.1016/j.jcis.2022.05.106 ↗
10. Investigation on the electrode design of hybrid Zn-Co3O4/air batteries for performance improvements10.1016/j.electacta.2018.07.039 ↗
11. A zinc battery with ultra-flat discharge plateau through phase transition mechanism10.1016/j.nanoen.2020.104583 ↗
12. A new high-performance rechargeable alkaline Zn battery based on mesoporous nitrogen-doped oxygen-deficient hematite10.1007/s40843-021-1830-2 ↗
13. Preparation of perovskite-type La0.8Sr0.2Mn1-xCoxO3 by template method and catalytic performance in aluminum-air battery10.1016/j.jpcs.2022.111200 ↗
14. Origin and regulation of interfacial instability for nickel-rich cathodes and NASICON-type Li1+xAlxTi2-x(PO4)3 solid electrolytes in solid-state lithium batteries10.1016/j.apsusc.2023.156741 ↗
15. What defines a halide perovskite?10.1021/acsenergylett.0c00039 ↗
16. A high-capacity of oxygen induced SrTiO3 cathode material for rechargeable Alkaline Zinc battery10.1016/j.mssp.2021.105802 ↗
17. High thermoelectric power factor of Ag and Nb co-substituted SrTiO3 perovskite nanostructures10.1016/j.matchemphys.2023.127950 ↗
18. Reactivity of lattice oxygen in Ti-Site-Substituted SrTiO3 perovskite catalysts10.1021/acsami.2c20165 ↗
19. Enhancement of discharge capacity and energy density by oxygen vacancies in nickel doped SrTiO3 as cathode for rechargeable alkaline zinc battery10.1016/j.electacta.2021.139705 ↗
20. Enhanced conductivity boosts the cathodic performance of aluminum-doped SrTiO3 in rechargeable alkaline zinc battery10.1149/1945-7111/ac1d01 ↗
21. Meaden · 1965
22. Dual-strategy of Cu-doping and O3 biphasic structure enables Fe/Mn-based layered oxide for high-performance sodium-ion batteries cathode10.1016/j.jpowsour.2023.232930 ↗
23. Effective ionic radii in oxides and fluorides10.1107/S0567740869003220 ↗
24. Visible-near-infrared-light-driven selective oxidation of alcohols over nanostructured Cu doped SrTiO3 in water under mild condition10.1016/j.jcat.2021.05.008 ↗
25. Carbon-based electrode loaded with Y-doped SrTiO3 perovskite as support for enzyme immobilization in biosensors10.1016/j.ceramint.2019.10.077 ↗
26. Enhanced water splitting over ethylenediaminetetraacetate treated SrTiO3 photocatalysts with high crystallinity, reduced size, and surface nanostructure10.1016/j.jcis.2023.07.041 ↗
27. Dual redox cycles of Mn(Ⅱ)/Mn (III) and Mn (III)/Mn (IV) on porous Mn/N co-doped biochar surfaces for promoting peroxymonosulfate activation and ciprofloxacin degradation10.1016/j.jcis.2022.12.008 ↗
28. Raman scattering spectra of ceramics, films, and superlattices of ferroelectric perovskites: a review10.1134/S1063783412050502 ↗
29. Long-range and short-range structures of cube-like shape SrTiO3 powders: microwave-assisted hydrothermal synthesis and photocatalytic activity10.1039/c3cp50643f ↗
30. Symmetry-forbidden-mode detection in SrTiO3 nanoislands with tip-enhanced Raman spectroscopy10.1021/acs.jpcc.0c10938 ↗
31. Characterization of oxygen vacancies in SrTiO3 by means of anelastic and Raman spectroscopy10.1063/1.5115106 ↗
32. Dopant effects on the structural, low temperature Raman scattering and electrical transport properties in SrTi1-xFexO3 nanoparticles synthesized by sol-gel method10.1007/s10971-010-2242-5 ↗
33. Oxygen vacancy migration along dislocations in SrTiO3 studied by cathodoluminescence10.1088/1361-6463/ab3b3e ↗
34. Aluminum doping for optimization of ultrathin and high-k dielectric layer based on SrTiO310.1016/j.jmst.2019.12.006 ↗
35. Use of surface photovoltage spectroscopy to probe energy levels and charge carrier dynamics in transition metal (Ni, Cu, Fe, Mn, Rh) doped SrTiO3 photocatalysts for H2 evolution from water10.1039/C7TA10934B ↗
36. Significance of interface barrier at electrode of hematite hydroelectric cell for generating ecopower by water splitting10.1002/er.4613 ↗
37. Mechanical Milling/Alloying, Characterization and Phase Formation Prediction of Al0.1-0.5(Mn)CoCrCuFeNi-HEA powder feedstocks for cold spray deposition processing
38. Mesoporous carbons and Fe collectively boost the capacity increases upon Long-term cycling of Ni/Fe/NiFe2O4@C anode for Lithium-ion batteries10.1016/j.apsusc.2023.156994 ↗
39. Porous single-crystal NaTi2(PO4)3 via liquid transformation of TiO2 nanosheets for flexible aqueous Na-ion capacitor10.1016/j.nanoen.2018.06.017 ↗
40. The oxygen vacancy in Li-ion battery cathode materials10.1039/D0NH00340A ↗
41. Flexible antifreeze Zn-ion hybrid supercapacitor based on gel electrolyte with graphene electrodes10.1021/acsami.1c02242 ↗
42. Enhanced electrochemical performance of MnO2 by high oxidation state vanadium(Ⅴ) doping10.1016/j.jallcom.2023.169386 ↗
43. Cu2+ intercalation boosts zinc energy reactivity of MnO2 with enhanced capacity and longevity10.1016/j.apsusc.2023.157060 ↗
44. Dual-modification of manganese oxide by heterostructure and cation pre-intercalation for high-rate and stable zinc-ion storage10.1016/j.jechem.2021.09.042 ↗
45. Hierarchical heterostructure engineering of layered double hydroxides on nickel sulfides Heteronanowire arrays as efficient cathode for alkaline aqueous zinc batteries10.1002/smll.202202799 ↗
46. Oxygen-defect enhanced anion adsorption energy toward super-rate and durable cathode for ni-zn batteries10.1007/s40820-021-00699-z ↗
47. Rechargeable alkaline zinc/copper oxide batteries10.1021/acsaem.1c01133 ↗
48. Influence of anion substitution on 3D-architectured Ni-Co-A (A=H, O, P) as efficient cathode materials towards rechargeable Zn-based battery10.1016/j.ensm.2021.02.026 ↗
49. Rechargeable alkaline Zn-Cu batteries enabled by carbon coated Cu/Bi particles10.1016/j.jpowsour.2022.231168 ↗
50. Unravel the influences of Ni substitution on Co-based electrodes for rechargeable alkaline Zn-Co batteries10.1016/j.jpowsour.2020.229192 ↗
51. Highly reversible anode with Bi and ZnO dual chemistry for aqueous alkaline battery10.1016/j.jpowsour.2022.231903 ↗
52. Hollow-porous nanospheres of ZnMn2O4 spinel: a high energy density cathode for rechargeable aqueous battery10.1016/j.matchemphys.2021.124373 ↗
53. Carbon fiber reinforced Zn-MnO2 structural composite batteries10.1016/j.compscitech.2021.108787 ↗
54. Regulating exposed facets of metal-organic frameworks for high-rate alkaline aqueous zinc batteries10.1002/anie.202209794 ↗
55. High voltage aqueous Zn/LiCoO2 hybrid battery under mildly alkaline conditions10.1016/j.ensm.2021.08.042 ↗
56. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo1/3Ni1/3Mn1/3O210.1021/ja108588y ↗
57. Current material design strategies on the copper chalcogenide cathodes for rechargeable magnesium batteries: a review