journal article·2016-12

Deposition characteristics of titanium coating deposited on SiC fiber by cold-wall chemical vapor deposition

Xian Luo, Shuai Wu, Yan-qing Yang, Na Jin, Shuai Liu, Bin Huang

Publisher page

Abstract

The deposition characteristics of titanium coating on SiC fiber using TiCl4-H2-Ar gas mixture in a cold-wall chemical vapor deposition were studied by the combination of thermodynamic analysis and experimental studies. The thermodynamic analysis of the reactions in the TiCl4-H2-Ar system indicates that TiCl4 transforms to titanium as the following paths: TiCl4 → TiCl3 → Ti, or TiCl4 → TiCl3 → TiCl2 → Ti. The experimental results show that typical deposited coating contains two distinct layers: a TiC reaction layer close to SiC fiber and titanium coating which has an atomic percentage of titanium more than 70% and that of carbon lower than 30%. The results illustrate that a carbon diffusion barrier coating needs to be deposited if pure titanium is to be prepared. The deposition rate increases with the increase of temperature, but higher temperature has a negative effect on the surface uniformity of titanium coating. In addition, appropriate argon gas flow rate has a positive effect on smoothing the surface morphology of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering10.1016/j.matlet.2008.04.011 ↗
2. Modification of fretting fatigue behavior of AL7075–t6 alloy by the application of titanium coating using IBED technique and shot peening10.1016/j.triboint.2008.05.006 ↗
3. High thickness Ti/TiN multilayer thin coatings for wear resistant applications10.1016/j.surfcoat.2006.03.042 ↗
4. Ti/TiN multilayer coatings: deposition technique, characterization and mechanical properties10.1016/S0257-8972(01)01171-9 ↗
5. Effects of titanium-implanted pre-treatments on the residual stress of TiN coatings on high-speed steel substrates10.1016/j.surfcoat.2006.09.035 ↗
6. Study of TiN and Ti/TiN coatings produced by pulsed-arc discharge10.1016/j.surfcoat.2004.07.082 ↗
7. Investigation of Ti and Cr based PVD coatings deposited onto HSS Co 5 twist drills10.1016/j.apsusc.2013.06.051 ↗
8. Dependence of diffusion barrier properties in microstructure of reactively sputtered TiN films in Al alloy/TiN/Ti/Si system10.1016/S0169-4332(97)80099-2 ↗
9. Influence of substrate temperature on the materials properties of reactive DC magnetron sputtered Ti/TiN multilayered thin films10.1016/j.mseb.2010.08.004 ↗
10. Effect of TiN/Ti multilayer on fretting fatigue resistance of Ti-811 alloy at elevated temperature10.1016/S1003-6326(08)60312-X ↗
11. Hard coating performance enhancement by using [Ti/TiN]n, [Zr/ZrN]n and [TiN/ZrN]n multilayer system10.1016/j.mseb.2010.03.069 ↗
12. Study of the deposition of Ti/TiN multilayers by magnetron sputtering10.1002/sia.3299 ↗
13. Improving mechanical properties of a-CNx films by Ti-TiN/CNx gradient multilayer10.1016/j.apsusc.2010.07.018 ↗
14. Effects of Ti/TiN multilayer on corrosion resistance of nickel-titanium orthodontic brackets in artificial saliva10.1016/j.corsci.2007.03.041 ↗
15. Ti/TiN multilayer thin films deposited by pulse biased arc ion plating10.1016/j.apsusc.2010.10.042 ↗
16. Fatigue life of Ti/TiN/DLC multilayer films fabricated on bearing steel by PIIID10.1016/j.vacuum.2011.02.015 ↗
17. Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)10.1016/j.surfcoat.2005.11.021 ↗
18. Deposition characteristics of titanium coating in cold spraying10.1016/S0257-8972(02)00919-2 ↗
19. The influence of titanium interlayers on the adhesion of titanium nitride coatings obtained by plasma-assisted chemical vapor deposition10.1016/0921-5093(91)90599-I ↗
20. Characterization of multilayered Ti/TiN films grown by chemical vapor deposition10.1016/S0040-6090(98)01018-9 ↗
21. Development of CVD Ti-containing films10.1016/j.pmatsci.2013.07.001 ↗
22. Deposition of titanium on SiC fibres from chloride melts10.1007/s10800-011-0284-1 ↗
23. Kodas · 1994 · 4
24. Spectroscopic characterization of CVD Ti coating on SiC-coated boron fibers10.1021/cm00014a030 ↗
25. Preparation of titanium coating on alumina foam by chemical vapor deposition10.4028/www.scientific.net/MSF.804.195 ↗
26. Deposition of titanium layer on steel substrate using PECVD method: a parametric study
27. Laser chemical vapor deposition of Ti from TiBr410.1063/1.343903 ↗
28. Pierson · 1992 · 36
29. Tianjin Chemical Industry Research Institute · 1996 · 341
30. Microstructural analysis of silicon carbide monofilaments10.1046/j.1365-2818.2001.00836.x ↗
31. Microstructure, tensile strength and thermostability of W-core SiC fibers with or without carbon coating10.1016/j.msea.2015.09.019 ↗
32. Single-step synthesis process of Ti3SiC2 ohmic contacts on 4H-SiC by sputter-deposition of Ti10.1016/j.scriptamat.2014.11.025 ↗
33. Ti3SiC2-formation during Ti-C-Si multilayer deposition by magnetron sputtering at 650 °C10.1016/j.vacuum.2013.01.003 ↗
34. Meng · 1984 · 68
35. The roles of argon addition in thes hot filament chemical vapor deposition system10.1016/S0925-9635(01)00383-1 ↗
36. Effect of flow rate argon gas on growth of CVD TaC coatings and surface morphology