Synthesis of AA7075-CNT composite by stir-ultrasonic-squeeze casting using K2TiF6 flux, and its microstructural and mechanical characterizations
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. A comprehensive review on CNTs and CNT-Reinforced composites: syntheses, characteristics and applications
2. Tensile properties of carbon nanotubes reinforced aluminum matrix composites: a review10.1016/j.carbon.2020.01.007 ↗
3. Microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites synthesized via equal-channel angular pressing10.1016/j.msea.2016.06.027 ↗
4. Deformation behavior and strengthening mechanisms in a CNT-reinforced bimodal-grained aluminum matrix nanocomposite10.1016/j.msea.2021.141370 ↗
5. Micromechanics-based modeling of elastic modulus and coefficient of thermal expansion for CNT-metal nanocomposites: effects of waviness, clustering and aluminum carbide layer10.1007/s10999-020-09503-z ↗
6. Micromechanical estimation of effective thermal conductivities of metal matrix nanocomposites with local carbon nanotube agglomeration10.1016/j.jallcom.2019.04.197 ↗
7. Microstructure and mechanical properties of resistance-spot-welded AISI-1008 steel lap joints using multiwalled carbon nanotubes as an interlayer10.1007/s11665-021-05687-3 ↗
8. Dynamic analysis and optimization of SiC reinforced Al6082 and Al7075 MMCs10.1088/2053-1591/ab038e ↗
9. Fabrication and mechanical characterization of Al7075-T6/SiC/Gr/S-glass fiber particulate reinforced hybrid metal matrix composite using vacuum sealed stir casting technique10.1007/s12666-022-02549-x ↗
10. Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing10.1016/j.powtec.2014.08.016 ↗
11. Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting10.1016/j.ultsonch.2019.104665 ↗
12. The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy10.1016/S0921-5093(00)01594-X ↗
13. Chawla · 2013
14. Metal-matrix composites for space applications
15. Automotive engine materials
16. Study on plastic strengthening mechanisms of aluminum matrix nano-composites reinforced by nickel coated CNTs10.1080/09276440.2020.1844528 ↗
17. Carbon nanotube reinforced metal matrix composites - a review10.1179/095066009X12572530170543 ↗
18. Solid state processed Al-1100 alloy/MWCNT surface nanocomposites10.1016/j.mtla.2018.08.003 ↗
19. Fabrication of carbon nanotube reinforced A356 nanocomposites10.1557/jmr.2016.258 ↗
20. Density control and wettability enhancement by functionalizing carbon nanotubes with nickel oxide in aluminum-carbon nanotube system10.1166/jnn.2013.7844 ↗
21. Metallurgical challenges in carbon nanotube-reinforced metal matrix nanocomposites10.3390/met7100384 ↗
22. Interfacial modification and performance enhancement of carbon matrix/aluminum composites10.1016/j.jallcom.2022.163877 ↗
23. Wettability in metal matrix composites10.3390/met11071034 ↗
24. Effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite10.1016/j.jallcom.2019.02.217 ↗
25. Influence of carbon nanotubes on mechanical properties of cast aluminum, grade A510.1134/S2075113318020028 ↗
26. Carbon nanotube-reinforced aluminum composite produced by induction melting10.1016/j.jart.2016.05.002 ↗
27. Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites10.1016/j.carbon.2019.09.016 ↗
28. SiC formation on carbon nanotube surface for improving wettability with aluminum10.1016/j.compscitech.2012.09.014 ↗
29. Wetting of carbon by molten aluminum under ultrasonic field10.1088/1755-1315/639/1/012008 ↗
30. Correlations to predict microstructure and mechanical properties of ultrasonically cast metal matrix nanocomposites as a function of treatment time10.1002/adem.202000413 ↗
31. Ultrasonic processing of materials10.1007/s11663-014-0266-x ↗
32. Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process10.1007/s12613-020-2101-5 ↗
33. Study on effect of heat treatment on mechanical properties of AA7075-MWCNT composite10.1016/j.matpr.2019.06.275 ↗
34. Compocasting of A356-CNT composite10.1016/S1003-6326(09)60339-3 ↗
35. Effect of MWCNTs addition on the wear and compressive deformation behavior of LM13-SiC-MWCNTs hybrid composites10.1016/j.triboint.2018.07.013 ↗
36. Fabrication and characterization of AA7075 metal matrix composite reinforced with MWCNT10.1016/j.matpr.2017.11.484 ↗
37. Synthesis of A356-MWCNT nanocomposites through a novel two stage casting process10.1016/j.msea.2013.05.090 ↗
38. Effect of ultrasonic stir casting technique on mechanical and tribological properties of Aluminium–Multi-walled carbon nanotube nanocomposites10.1007/s40735-020-0331-8 ↗
39. Dry sliding wear analysis OF Al5083/CNT/Ni/MoB hybrid composite using DOE Taguchi method
40. Establishment of a facile technique to fabricate bulk AA6061/CNT composite with improved mechanical properties using combined stir-casting and squeeze-casting
41. Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process10.1177/09544089221116958 ↗
42. Wear resistance and tribological properties of GNPs and MWCNT reinforced AlSi18CuNiMg alloys produced by stir casting10.1016/j.triboint.2021.107201 ↗
43. Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through Taguchi method10.1016/j.jmrt.2019.02.008 ↗
44. Characterization and mechanical properties of stir-rheo-squeeze cast AA5083/MWCNTs/GNs hybrid nanocomposites developed using a novel preform-billet method10.1016/j.jmrt.2020.12.079 ↗
45. Experimental investigation on mechanical and tribological behaviour of surfactant coated multi-walled carbon nano tubes reinforced aluminium 6065-silicon metal matrix composite10.22226/2410-3535-2021-1-73-78 ↗
46. Mechanical properties and microstructure of A356 alloy reinforced AlN/MWCNT/graphite/Al composites fabricated by stir casting10.1088/2053-1591/ab587d ↗
47. Sensor-assisted assessment of the tribological behavior patterns of AA7075 hybrid MMC reinforced with multi-wall carbon nanotubes and pulverized fuel ash10.3390/ma13112583 ↗
48. Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method10.1007/s42114-020-00156-2 ↗
49. Effect of multiwalled carbon nanotubes on elevated temperature tensile and wear behavior of Al2024 matrix composites fabricated by stir casting and hot extrusion10.1007/s11665-020-05032-0 ↗
50. Wear and corrosion behavior of multi-walled carbon nanotubes (MWCNTs) reinforced Al-15Mg2Si in-situ composites10.1088/2053-1591/ab3f58 ↗
51. In situ synthesis of Al-TiCp composites by reacting K2TiF6 and particulate graphite in molten aluminium10.1016/j.jallcom.2006.12.016 ↗
52. Perfect wettability of carbon by liquid aluminum achieved by a multifunctional flux10.1007/s10853-010-4555-8 ↗
53. Control of Al4C3 phase formation in aluminum matrix composites reinforced with carbon nanostructures10.1051/e3sconf/202343106012 ↗
54. Increasing the flow stress during high-temperature deformation of aluminum matrix composites reinforced with TiC-Coated CNTs10.3390/ceramics6010013 ↗
55. Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC10.1016/j.jallcom.2018.06.170 ↗
56. Formation mechanism of nano titanium carbide on multi-walled carbon nanotube and influence of the nanocarbides on the load-bearing contribution of the nanotubes inner-walls in aluminum-matrix composites10.1016/j.carbon.2017.01.062 ↗
57. A facile one-step method of coating aluminum on multiwall carbon nanotubes10.1016/j.jallcom.2015.03.262 ↗
58. Systematic study of the effect of K2TiF6 flux content on the microstructure and mechanical properties of Al–B4C composites10.1016/j.msea.2023.144913 ↗
59. Thermally activated reactions of multi-walled carbon nanotubes reinforced aluminum matrix composite during the thermal spray consolidation10.1016/j.matchemphys.2012.01.071 ↗
60. Microstructure and properties of in-situ Ti5Si3-TiC composite coatings by reactive plasma spraying10.1016/j.apsusc.2020.145264 ↗
61. Titanium carbide coating on graphene nanoplatelets10.1016/j.jmrt.2020.01.053 ↗
62. Microstructural characterization and thermodynamic simulation of cast al-zn-mg-cu alloys
63. Recent progress of Al–Mg alloys: forming and preparation process, microstructure manipulation and application10.1016/j.jmrt.2024.07.051 ↗
64. The enhancement of wettability of SiC particles in cast aluminium matrix composites10.1016/S0924-0136(01)00919-0 ↗
65. Effects of Mg content on microstructure and mechanical properties of SiCp/Al-Mg composites fabricated by semi-solid stirring technique10.1016/S1003-6326(09)60385-X ↗
66. Thermal decomposition of the carbon nanotube/SiO2precursor powders: thermal analysis coupled with mass spectrometry10.1007/s10973-005-0847-7 ↗
67. A study on the oxidation and carbon diffusion of TiC in alumina-titanium carbide ceramics using XPS and Raman spectroscopy10.1016/S0254-0584(98)00187-4 ↗
68. Effect of solution heat treatment on the age hardening capacity of dendritic and globular AlSi7Mg0.6 alloys10.3139/146.110293 ↗
69. A comparative study on the mechanical and tribological characteristics of AA7075/h-BN and AA7075/h-BN/MoS2 hybrid nano-composites produced using stir-squeeze casting process10.1088/2051-672X/ac1915 ↗
70. Difference in the hot compressive behavior and processing maps between the As-cast and homogenized al-zn-mg-cu (7075) alloys10.1016/j.jmst.2016.04.006 ↗
71. Creating the structure and properties of 7075 alloy casts by thermal and forming processes10.12913/22998624/112361 ↗
72. Effects of Mg content on microstructure and mechanical properties of low Zn-containing Al−xMg−3Zn−1Cu cast alloys10.1016/S1003-6326(22)65828-X ↗
73. Effects of Mg contents on microstructures and second phases of as-cast Al–Zn–Mg–Cu alloys10.1016/j.jmrt.2022.10.050 ↗
74. The effect of ultrasonic vibrations prior to high pressure die-casting of AA707510.1016/j.matlet.2015.04.034 ↗
75. Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir casting10.1016/j.jmatprotec.2020.116699 ↗
76. Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition10.1016/j.compositesb.2017.12.005 ↗
77. Strengthening mechanisms in carbon nanotubes reinforced metal matrix composites: a review10.3390/met11101613 ↗
78. Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite10.1016/j.carbon.2016.03.038 ↗
79. Wetting of SiC by Al-Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C210.1016/j.jeurceramsoc.2018.04.025 ↗
80. Development of carbon nanotube (CNT)-reinforced Mg alloys: fabrication routes and mechanical properties10.3390/met12081392 ↗
81. A critical review on advanced reinforcements and base materials on hybrid metal matrix composites10.1007/s12633-020-00853-z ↗
82. The effect of TiC:CNT mixing ratio and CNT content on the mechanical and tribological behaviors of TiC modified CNT-reinforced Al-matrix nanocomposites10.1016/j.powtec.2018.03.023 ↗
83. In situ formed Al3 Ti particles in Al alloy matrix and their effects on the microstructure and mechanical properties of 7075 alloy10.1557/jmr.2014.123 ↗
84. Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes10.1016/j.scriptamat.2013.01.013 ↗
85. Microstructural evolution and strengthening mechanisms in Al7075/graphene nano-plates/carbon nano-tubes composite processed through accumulative roll bonding10.1016/j.msea.2021.140877 ↗
86. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
87. Strengthening mechanisms of an Al-Mg-Sc-Zr alloy10.1016/S1359-6454(02)00258-6 ↗
88. An atomistic dislocation mechanism of pressure-dependent plastic flow in aluminum10.1016/S1359-6454(99)00154-8 ↗
89. Bhaduri · 2018