journal article·2004-09

The growth of hydroxyapatite on alkaline treated Ti–6Al–4V soaking in higher temperature with concentrated Ca2+/HPO42− simulated body fluid

Feng-Huei Lin, Yao-Shan Hsu, Shih-Hsun Lin, Tim-Mo Chen

Materials Chemistry and Physics· Volume 87· Issue 1
Publisher page

Abstract

In this study, calcium and phosphorous ions in the simulated body fluid (SBF) was be increased to increase the rate of precipitation of hydroxyapatite (HA). The soaking temperature in concentrated calcium and phosphorous ion-SBF (CP-SBF) was increased to reduce the nucleation energy of the HA, which lead to an early precipitation to shorten the treatment process. When the metallic substrates treated with 10 M NaOH aqueous solution and subsequently heated at 600 ◦ C, a thin sodium titanium oxide layer was formed on the surfaces as the linking layer for HA and Ti–6Al–4V alloys. After Ti–6Al–4V alloys treated with alkali solution, it would soak into a simulated body fluid with higher concentration of calcium and phosphorous ions (CP-SBF) to increase the possibility of nucleation of HA. When Ti–6Al–4V alloys treated with alkali solution, subsequently heated at 600 ◦ C, and then soaked into CP-SBF at a temperature of 80 ◦ C, it could form a dense and thick (50m) bone-like hydroxyapatite layer on the surface. The HA layer was appeared on the surface of the Ti-alloy at the first week soaking, which was greatly shorten the coating process. In the research, the characteristics of the coating layer will be analyzed by the results of X-ray diffractometer (XRD), scanning electron microscope (SEM), and Fourier transformation infrared (FT-IR). © 2004 Published by Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Graded surface structure of bioactive titanium prepared by chemical treatment10.1002/(SICI)1097-4636(199905)45:2<100::AID-JBM4>3.0.CO;2-0 ↗
2. J.B. Park, R.S. Lakes, Biomaterials An Introduction, Plenum Press, New York, 1992.10.1007/978-1-4757-2156-0 ↗
3. G.M. Barrow, Physical Chemistry, sixth ed., McGraw-Hill, 1996.
4. Inotial bone matrix formation at the hydroxyapatite interface in vitro10.1002/jbm.820290113 ↗
5. Calcium phosphate ceramics as hard tissue prosthetics10.1097/00003086-198106000-00037 ↗
6. Retrospective analysis of hydroxyapatite development for oral implant applications10.1016/S0011-8532(22)02452-1 ↗
7. Osteoblastic phenotype expression on the surface of hydroxyapatite ceramics10.1002/(SICI)1097-4636(199710)37:1<122::AID-JBM15>3.0.CO;2-I ↗
8. Structural characterization of pulsed laser-deposited hydroxyapatite film on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
9. Structure, solubility and bond strength of thin calcium phosphate coatings produced by ion beam sputter deposition10.1016/0142-9612(92)90192-Q ↗
10. Calcium phosphate formation within sol–gel prepared titania in vitro and in vivo10.1002/jbm.820271205 ↗
11. The effect of surface macrotexture and hydroxyapatite coating on the mechanical strength and historogical profiles of titanium implant material10.1002/jbm.820211205 ↗
12. W.R. Lacefield, Hydroxyapatite coatings, in: P. Ducheyne, J. Lemons (Eds.), Bioceramics: Material Characteristics versus In Vitro Behavior, Academy of Sciences, New York, 1998, pp. 72–80.10.1111/j.1749-6632.1988.tb38501.x ↗
13. M.J. Filiaggi, R.M. Pilliar, Interfacial characterization of plasma sprayed hydroxyapatite/Ti–6Al–4V implant system, in: Annual Conference of the Canadian Biomaterial Society on Transactions of ABCS, 1989, pp. 23–25.
14. The effect of plasma sprayed induced changes in the characteristics on the in vitro stability of calcium phosphate ceramic
15. Features of calcium phosphate plasma-sprayed coatings: An in vitro study10.1002/jbm.820280815 ↗
16. In vitro testing of plasma sprayed hydroxyapatite coating10.1007/BF00121092 ↗
17. Mixed mode fracture characterization of hydroxyapatite-titanium alloy interface10.1002/jab.770050403 ↗
18. A. Ravagloili, A. Krajewski, Bioceramics: Materials, Properties, Applications, Chapman and Hall Press, London, 1992.10.1007/978-94-011-2336-5 ↗
19. Preparation of bioactive Ti6Al4V surfaces by a simple method10.1016/S0142-9612(97)00232-9 ↗
20. M.C. de Andrade, M.R.T. Filgueiras, T. Ogasawara, “Nucleation and growth of hydroxyapatite on titanium pretreated in NaOH solution” Experiments and thermodynamic explanation”, J. Biomed. Mater. Res., 46 (1999) 441–446.
21. The order of calcium and phosphate ion deposition on chemically treated titanium surfaces soaked in aqueous solution10.1002/(SICI)1097-4636(199911)47:2<213::AID-JBM11>3.0.CO;2-C ↗
22. The effect of heat treatment on bone-bonding ability of alkali-treated titanium10.1016/S0142-9612(98)90203-4 ↗
23. In vitro bioactivity of aerosol-gel deposited TiO2 thin coatings10.1002/1097-4636(200101)54:1<109::AID-JBM13>3.0.CO;2-S ↗
24. Apatite formation on organic monolayers in simulated body environment10.1002/(SICI)1097-4636(200004)50:1<16::AID-JBM3>3.0.CO;2-G ↗
25. Transition element contained PSA as a dental retrograde-filling materials10.1016/S0142-9612(02)00294-6 ↗
26. The effect of Ca/P concentration and temperature of SBF on the growth of HAP coating on 316L SS10.1016/S0142-9612(02)00154-0 ↗
27. In situ Raman spectra of anodically formed titanium dioxide layer in solution of H2SO4, KOH, and HNO310.1149/1.2085349 ↗
28. The growth kinetics and optical properties of films formed under open circuit conditions on a titanium surface in potassium hydroxide solution10.1016/0010-938X(92)90024-W ↗
29. T. Kokubo, Bioactivity of glasses and glass–ceramics, in: P. Ducheyne, T. Kokubo, C.A. Blitterswijk (Eds.), Handbook of Bioactive Ceramics, vol. 1, Bone-Bonding Biomaterials, Reed Healthcare Communications, Leiden, The Netherlands, 1992, pp. 31–46.
30. T. Kokubo, Bioactivity of glasses and glass–ceramics, in: P. Ducheyne, T. Kokubo, C.A. Blitterswijk (Eds.), Handbook of Bioactive Ceramics, vol. 1, Bone-Bonding Biomaterials, Reed Healthcare Communications, Leiden, The Netherlands, 1992, pp. 31–46.
31. Ca, P-rich layer formed on high-strength bioactive glass–ceramic A-W10.1002/jbm.820240306 ↗
32. Preparation of bioactive Ti and its alloys via simple chemical surface treatment10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B ↗
33. Kinetics of hydroxyapatite precipitation at pH 10 to 1110.1016/S0142-9612(00)00166-6 ↗
34. K. de Groot, Bioceramics of Calcium Phosphate, CRC Press Inc., Boca Raton, FL, 1983.
35. Thin film of low-crystalline calcium phosphate apatite formed at low temperature10.1016/S0142-9612(99)00265-3 ↗