Partial substitution of manganese with cerium in SrMnO 3 nano-perovskite catalyst. Effect of the modification on the catalytic combustion of dilute acetone
Source abstract
Abstract
Abstract Ultrafine SrMn 1−x Ce x O 3 (x = 0, 0.2) perovskites were prepared by self-combustion method and heat treatment at 1000 °C for 4 h. The structure and surface properties were investigated by X-ray powder diffraction, scanning electron microscopy (SEM), EDX spectroscopy, and BET analysis. The catalyst properties of the perovskite nanopowders were tested in the catalytic combustion of dilute acetone at atmospheric pressure. The results revealed that the partial substitution of Mn by Ce ions (x = 0.2) in perovskite structure of SrMnO 3 had significantly improved catalytic activity of the perovskite. The SrMn 0.8 Ce 0,2 O 3 perovskite composition can be a good candidate for catalytic combustion of low concentration acetone (1–2‰ in air) at low temperatures. The acetone conversion over this catalyst exceeds 90% at 200 °C, whereas over SrMnO 3 it is only 50%. Compared with SrMnO 3 , T 50 is decreased by 75 °C and T 90 is decreased by 70 °C. The enhancement of the catalytic activity at a Ce doping of 0.2 may be ascribed to smaller crystallite sizes, larger specific surface area and the presence of Ce and Mn cations with variable valence in the perovskite structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Complete catalytic oxidation of volatile organics
2. Catalytic combustion of volatile organic compounds10.1016/j.jhazmat.2004.03.019 ↗
3. Effects of NiTiO3 nanoparticles supported by mesoporous MCM-41 on photoreduction of methylene blue under UV and visible light irradiation10.1016/j.spmi.2010.02.007 ↗
4. Effect of preparation method on activity and stability of LaMnO3 and LaCoO3 catalysts for the flameless combustion of methane10.1016/j.apcatb.2004.07.010 ↗
5. Catalytic flameless combustion of methane over perovskites prepared by flame-hydrolysis10.1016/S0926-3373(01)00194-1 ↗
6. Effect of honeycomb supporting on activity of LaBO3 +/-delta perovskite-like catalysts for methane flameless combustion10.1016/j.apcatb.2005.10.002 ↗
7. Perovskite catalysts for the catalytic flameless combustion of methane - preparation by flame-hydrolysis and characterisation by TPD-TPR-MS and EPR10.1016/S0926-3373(00)00163-6 ↗
8. Effect of substitution by cerium on the activity of LaMnO3 perovskite in methane combustion10.1016/S0926-860X(02)00644-0 ↗
9. Catalytic combustion of hydrocarbons over perovskites10.1016/S0926-3373(02)00024-3 ↗
10. Catalytic properties of stoichiometric and non-stoichiometric LaFeO3 perovskite for total oxidation of methane10.1016/S0254-0584(01)00498-9 ↗
11. Transient behaviour of perovskite-based monolithic reactors in the catalytic combustion of methane10.1016/S0920-5861(01)00359-5 ↗
12. Surface properties and catalytic performance in methane combustion of Sr-substituted lanthanum manganites10.1016/S0926-3373(99)00111-3 ↗
13. Catalytic oxidation over lanthanum-transition metal perovskite materials10.1016/S0920-5861(98)00291-0 ↗
14. Seiyama · 1993 · 215
15. Regeneration of palladium subsequent to solid solution and segregation in a perovskite catalyst: an Intelligent catalyst10.1023/A:1016626713430 ↗
16. Modified LaCoO3 nano-perovskite catalysts for the environmental application of automotive CO oxidation10.1016/j.cej.2008.08.041 ↗
17. Surface properties and catalytic performance of La1-xSrxCrO3 perovskite-type oxides for CO and C3H6 combustion10.1016/j.catcom.2006.04.011 ↗
18. Ceria-based oxides as supports for LaCoO3 perovskite catalysts for total oxidation of VOC10.1016/j.apcatb.2005.10.037 ↗
19. AFeO3(A = La, Nd, Sm) and LaFe1-xMgO3 perovskites as methane combustion and CO oxidation catalysts : structural, redox and catalytic properties10.1016/S0926-3373(00)00215-0 ↗
20. Surface properties and catatytic performance in CO oxidation of cerium substituted lanthanum-manganese oxides10.1016/S0926-860X(02)00241-7 ↗
21. Preparation of high surface area La1-xAxMnO3 (A = Ba, Sr or Ca) ultra fine particles used for CH4 oxidation10.1016/S1385-8947(02)00013-X ↗
22. Catalytic combustion of CH4 and CO on La1-xMxMnO3 perovskites10.1016/S0920-5861(98)00295-8 ↗
23. Oxygen storage capacity of La1-xAxBO3 (with A = Sr, Ce; B = Co, Mn) – relation with catalytic activity in the CH4 oxidation reaction10.1016/j.apcatb.2004.12.010 ↗
24. La1-xSrxCoO3 (x = 0, 0.2) perovskites type catalyst for carbon monoxide emission control from auto-exhaust10.1016/j.proeng.2013.01.044 ↗
25. Catalytic combustion of dilute acetone over Cu-doped ceria catalysts10.1016/j.cej.2009.05.033 ↗
26. Temperature-programmed reduction and CO oxidation studies over Ce-Sn mixed oxides10.1023/A:1016656408728 ↗
27. VOC oxidation over MnOx-CeO2 catalysts prepared by a combustion method10.1016/j.apcatb.2008.04.006 ↗
28. Catalytic properties of ceria and CeO2-containing materials10.1080/01614949608006464 ↗
29. Nanostructured manganese doped ceria solid solutions for CO oxidation at lower temperatures10.1016/j.apcatb.2014.06.038 ↗
30. Oxidation of ethanol over Mn–Ce–O and Mn–Ce–Zr–O complex compounds synthesized by sol–gel method10.1016/j.catcom.2007.01.036 ↗
31. MnO x–CeO 2 mixed oxide catalysts for complete oxidation of formaldehyde: effect of preparation method and calcination temperature10.1016/j.apcatb.2005.08.004 ↗
32. Preparation and characterization of Ce-Zr and Ce-Mn based oxides for n-hexane combustion: application to catalytic membrane reactors10.1016/j.cej.2006.09.005 ↗
33. A theoretic insight into the catalytic activity promotion of CeO2 surfaces by Mn doping10.1039/c2cp00061j ↗
34. Scandium substituted nickel-cobalt ferrite nanoparticles for catalyst applications10.1016/j.apcatb.2014.03.052 ↗
35. Popa · 2008
36. Huheey · 1993
37. Lowell · 2004
38. Nanostructured GdAlO3 perovskite, a new possible catalyst for combustion of volatile organic compounds10.1007/s10853-013-7243-7 ↗
39. Evidence of phase cooperation in the LaCoO3-CeO2-Co3O4 catalytic system in relation to activity in methane combustion10.1016/S0926-860X(01)00903-6 ↗
40. Influence of the composition of perovskites based on SrMnO3 on their catalytic properties in the oxidative coupling of methane10.1007/s11237-005-0018-8 ↗
41. Complete oxidation of formaldehyde over Ag/MnOx-CeO2 catalysts10.1016/j.cej.2006.02.002 ↗
42. Deep oxidation of VOC mixtures with platinum supported on Al2O3/Al monoliths10.1016/S0926-3373(01)00294-6 ↗
43. Influence of the mobility of oxygen on the reactivity of La1-xSr(x)MnO3 perovskites in methane oxidation10.1134/S0023158411030086 ↗
44. Characterization and applications of calcium ferrites based materials containing active oxygen species10.4028/www.scientific.net/AST.45.2169 ↗