journal article·2021-02

Influence of diamond content and milling duration on microstructure and thermal conductivity of Ti-coated diamond/copper composite coating on copper substrate

Jing Sun, Jiajun Zang, Huan Li, Xiaomei Feng, Yifu Shen

Publisher page

Abstract

Abstract In the present work, Ti-coated diamond/copper composite coatings were effectively deposited on T2 Cu matrix via mechanical alloying method. Influences of diamond content and milling time upon the coatings were studied. The results stated that it could promote the wettability between copper and diamond through diamond surface modification with Ti powder by mechanical alloying. It was also a pre-refinement process of diamond particles, which was beneficial to obtain coatings with uniform diamond distributions and promoted properties. Coatings with excellent microstructures and mechanical properties were obtained with the diamond volume fraction of 40% and the milling time of 7 h. Heat treatment was greatly significant to the thermal performance. And the sample was exhibited excellent thermal conductivity of 409W/mK after annealing at 800 °C for 1 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Optimization of sintering parameters for diamond–copper composites in conventional sintering and their thermal conductivity10.1016/j.jallcom.2014.06.139 ↗
2. Thermal conductivity of Cu–Zr/diamond composites produced by high temperature–high pressure method10.1016/j.compositesb.2014.08.023 ↗
3. On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites10.1016/j.scriptamat.2007.08.007 ↗
4. Copper and its alloys thermal conductivity controlling with diamond and Ti or Cr addition
5. Thermal conductivity of Cu-Ti/diamond composites via spark plasma sintering10.1016/j.diamond.2019.02.014 ↗
6. Properties of bulk polycrystalline CVD diamond10.1016/0925-9635(94)90176-7 ↗
7. Effective thermal conductivity of a diamond coated heat spreader10.1016/S0925-9635(00)00230-2 ↗
8. Optimized thermal properties in diamond particles reinforced copper-titanium matrix composites produced by gas pressure infiltration10.1016/j.compositesa.2016.10.005 ↗
9. Research progress of diamond/copper composites with high thermal conductivity10.1016/j.diamond.2020.107993 ↗
10. High thermal conductivity of Cu-B/diamond composites prepared by gas pressure infiltration10.1016/j.jallcom.2017.11.273 ↗
11. Tailoring interface structure and enhancing thermal conductivity of Cu/diamond composites by alloying boron to the Cu matrix10.1016/j.matchar.2019.04.015 ↗
12. Interfacial structure evolution and thermal conductivity of Cu-Zr/diamond composites prepared by gas pressure infiltration10.1016/j.jallcom.2018.12.053 ↗
13. On the thermal conductivity of Cu-Zr/diamond composites10.1016/j.matdes.2012.09.006 ↗
14. The influence of minor titanium addition on thermal properties of diamond/copper composites via in situ reactive sintering10.1016/j.mssp.2014.09.050 ↗
15. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles10.1016/j.jallcom.2009.10.040 ↗
16. Effect of coating on the microstructure and thermal conductivities of diamond–Cu composites prepared by powder metallurgy10.1016/j.compscitech.2011.06.012 ↗
17. High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix10.1007/s10853-010-4938-x ↗
18. Effect of molybdenum as interfacial element on the thermal conductivity of diamond/Cu composites10.1016/j.jallcom.2012.03.045 ↗
19. Effect of surface roughening on the interfacial thermal conductance of diamond/copper composites10.1016/j.diamond.2019.107467 ↗
20. Effects of dual-layer coatings on microstructure and thermal conductivity of diamond/Cu composites prepared by vacuum hot pressing10.1016/j.surfcoat.2015.07.059 ↗
21. Microstructure and thermal conductivity of Cu/diamond composites with Ti-coated diamond particles produced by gas pressure infiltration10.1016/j.jallcom.2015.06.062 ↗
22. Matrix microstructure deteriorations resulting from diamond incorporation in electroplated metal–diamond composites10.1016/j.surfcoat.2007.06.029 ↗
23. Thermal conductivity of copper-diamond composite materials produced by electrodeposition and the effect of TiC coatings on diamond particles10.1016/j.compositesb.2018.08.014 ↗
24. Effect of molybdenum carbide intermediate layers on thermal properties of copper–diamond composites10.1016/j.jallcom.2013.04.121 ↗
25. High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix10.1007/s10853-010-4938-x ↗
26. Thermal conductivity of Cu/diamond composites prepared by a new pretreatment of diamond powder10.1016/j.compositesb.2013.04.017 ↗
27. Spark plasma sintering of titanium-coated diamond and copper–titanium powder to enhance thermal conductivity of diamond/copper composites10.1016/j.mssp.2015.01.041 ↗
28. Thermal shock resistance and thermal conductivity of diamond-Cu composite coatings on Cu substrate via mechanical milling method10.1016/j.surfcoat.2018.08.033 ↗
29. Microstructures and oxidation behavior of NiCrAlCoY-Al composite coatings on Ti-6Al-4V alloy substrate via high-energy mechanical alloying method10.1016/j.jallcom.2016.10.171 ↗
30. Technological aspects of Fe-Al-Si intermetallic alloy preparation by mechanical alloying10.4028/www.scientific.net/KEM.810.101 ↗
31. Dissolution behaviour of alloying elements into vanadium matrix during mechanical milling10.37358/RC.17.5.5622 ↗
32. Optimized thermal conductivity of diamond/Cu composite prepared with tungsten-copper-coated diamond particles by vacuum sintering technique10.1016/j.vacuum.2018.03.052 ↗
33. Raman spectra of graphite and diamond mechanically milled with agate or stainless steel ball-mill10.2320/matertrans1989.36.282 ↗
34. Effects of annealing treatment and pre-refinement of raw material on microstructures and properties of mechanically alloyed Cr-Al composite coatings on Ti-6Al-4V alloy10.1016/j.matchar.2016.08.024 ↗
35. Wear resistance and thermal conductivity of diamond/Cu-1Cr mechanical milled coatings after high temperature annealing10.1016/j.diamond.2019.05.023 ↗
36. Effect of annealing treatment on microstructures, mechanical properties and cavitation erosion performance of high velocity oxy-fuel sprayed NiCoCrAlYTa coating10.1016/j.jmst.2020.03.030 ↗
37. Influence of surface and grain-boundary scattering on the resistivity of copper in reduced dimensions10.1063/1.1703844 ↗
38. Evolution process of the synthesis of TiC in the Cu–Ti–C system10.1016/j.jallcom.2006.11.024 ↗
39. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles10.1016/j.scriptamat.2011.09.028 ↗
40. Thermal conductivity of Cu–Zr/diamond composites produced by high temperature–high pressure method10.1016/j.compositesb.2014.08.023 ↗
41. The thermal conductivity of metallic ceramics10.1007/s11837-998-0131-y ↗