CrAlON CAE-PVD coatings for oxidation and wear protection of TZM alloys in FAST sintering applications
Source abstract
Abstract
CrAlO and CrAlO/CrAlN multilayers deposited by cathodic arc evaporation were developed as protective films in metal and ceramic powder FAST sintering tool dies fabricated in titanium-zirconium-molybdenum (TZM). The films have been characterised in terms of their composition, microstructure, mechanical properties and thermal stability in air at high temperatures between 800 C and 1100 C; in addition the tribological performance has been analysed at room temperature and at 400 C. The crystalline structure and composition of the CrAlO based coatings are compatible with the formation of a mixture of a-corundum and a cubic fcc (Cr,Al)2O3. The crystalline structure of the multilayer is, on the other hand, dominated by the cubic fcc lattice plane reflections of the CrAlN. The deposited specimens have high hardness, between 25 and 30 GPa, which are stable even after annealing at 1000 C. Even more, the multilayer coating also exhibited good mechanical stability at 1100 C. The multilayer coating also exhibited an excellent behaviour against wear at 400 C. Sintering trials using coated TZM dies have been carried out using Ti90Sn10 and Al2O3 high energy ball milled powders. The experimental results show that the oxide based coating formulations are potentially able to protect the tools from wear, sticking and oxidation of their surfaces. This may allow for the use of TZM material as an alternative to other substrates such as graphite for high-temperature dies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Forming microgears by micro-FAST technology10.1109/JMEMS.2013.2241394 ↗
2. Forming alumina (Al2O3) by micro-FAST
3. Electric current activation of sintering: a review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
4. Friction behavior of alumina/molybdenum composites and formation of MoO3-x phase at 400 °C10.1016/j.triboint.2015.02.010 ↗
5. Studies on the development of protective coating on TZM alloy and its subsequent characterization10.1016/j.jmatprotec.2007.12.075 ↗
6. Sliding friction and wear behaviour of Titanium-Zirconium-Molybdenum (TZM) alloy against Al2O3 and Si3N4 balls under several environments and temperatures10.1016/j.triboint.2016.10.049 ↗
7. High temperature oxidation behavior of CrN/AlN superlattice films10.1016/j.tsf.2010.11.042 ↗
8. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
9. Thermal stability and oxidation behavior of AlTiN, AlCrN and AlCrSiWN coatings10.1016/j.ijrmhm.2013.11.018 ↗
10. Improvement of the oxidation behavior of Ti1-xAlxN hard coatings by optimization of the Ti/Al ratio10.1007/s002160050976 ↗
11. Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2009.03.038 ↗
12. Compositionally gradient PVD CrAlSiN films: structural examination and oxidation resistance
13. High-performance coatings for cutting tools
14. Wear and oxidation resistance of combustion CVD grown alumina films10.1016/j.surfcoat.2012.05.011 ↗
15. Texture and microstructure of Cr2O3 and (Cr,Al)2O3 thin films deposited by reactive inductively coupled plasma magnetron sputtering10.1016/j.tsf.2010.01.008 ↗
16. Approaches to influence the microstructure and the properties of Al-Cr-O layers synthesized by cathodic arc evaporation10.1016/j.surfcoat.2009.10.055 ↗
17. Cathodic arc deposition of (Al,Cr)2O3: macroparticles and cathode surface modifications10.1016/j.surfcoat.2011.09.028 ↗
18. Structural and mechanical properties of corundum and cubic (AlxCr1-x)2+yO3-y coatings grown by reactive cathodic arc evaporation in as-deposited and annealed states10.1016/j.actamat.2013.05.002 ↗
19. Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings10.1016/j.surfcoat.2015.09.055 ↗
20. Characterization of tribological behavior and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures10.1016/j.triboint.2014.08.016 ↗
21. Correlation between anionic substitution and structural properties in AlCr(OxN1-x) coatings deposited by lateral rotating cathode arc PVD10.1016/j.tsf.2011.08.075 ↗
22. Oxidation behavior of Cr-Al-N-O thin films prepared by pulsed laser deposition10.1016/S0040-6090(02)00024-X ↗
23. Combinatorial approach to the growth of alpha-(Al1-x,Crx)2O3 solid solution strengthened thin films by reactive r.f. magnetron sputtering10.1016/j.surfcoat.2010.03.029 ↗
24. Formation of cubic structured (Al1-xCrx)2+δO3 and its dynamic transition to corundum phase during cathodic arc evaporation10.1016/j.surfcoat.2012.10.062 ↗
25. Pulse enhanced electron emission (P3e™) arc evaporation and the synthesis of wear resistant Al-Cr-O coatings in corundum structure10.1016/j.surfcoat.2007.05.044 ↗
26. Microstructure and thermal stability of corundum-type (Al0.5Cr0.5)2O3 solid solution coatings grown by cathodic arc evaporation10.1016/j.tsf.2013.02.046 ↗
27. Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness10.1063/1.339770 ↗
28. Interfaces in arc evaporated Al-Cr-N/Al-Cr-O multilayers and their impact on hardness10.1016/j.surfcoat.2017.05.039 ↗
29. Influence of temperature in arc-activated plasma nitriding of maraging steel in solution annealed and aged conditions10.1016/j.surfcoat.2014.07.084 ↗
30. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
31. R. Ji, Development and Characterisation of Nano-multilayer CrAlSiN Coating Systems for Cutting Tools.
32. Structural and mechanical properties of Cr-Al-O-N thin films grown by cathodic arc deposition10.1016/j.actamat.2012.08.010 ↗
33. Face-centered cubic (Al1−xCrx)2O310.1016/j.tsf.2010.11.052 ↗
34. Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditions10.1016/j.wear.2008.12.045 ↗
35. Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications10.1016/j.triboint.2008.06.015 ↗
36. Structure and mechanical properties of arc evaporated Ti-Al-O-N thin films10.1016/j.surfcoat.2006.12.006 ↗
37. The influence of alloying elements on the phase stability and mechanical properties of AlCrN coatings10.1016/j.surfcoat.2005.02.196 ↗
38. High-temperature tribological properties of CrAlN, CrAlSiN and AlCrSiN coatings10.1016/j.surfcoat.2011.08.037 ↗
39. Microstructural evaluation of high oxidation resistant CrAlSiN hard coating at elevated temperature in air atmosphere10.4028/www.scientific.net/KEM.373-374.446 ↗
40. Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings10.1016/S0257-8972(01)01714-5 ↗
41. Characterization of multilayer pvd nanocoatings deposited on tungsten carbide cutting tools10.1007/s00170-007-1059-z ↗
42. Ti-Al-N/Mo-Si-B multilayers: an architectural arrangement for high temperature oxidation resistant hard coatings10.1016/j.surfcoat.2017.08.032 ↗
43. Corrosion behaviors of Cr(N,O)/CrN multi-layered coatings by cathodic arc deposition10.1016/j.surfcoat.2007.07.113 ↗