journal article·2018-05

Ni-Cr-Mn-Y-Nb resistive thin film prepared by co-sputtering

Wei-Ju Chen, Tung-Yueh Liu, Ho-Yun Lee, Ying-Chieh Lee

Publisher page

Abstract

Abstract A Ni-Cr-Mn-Y-Nb resistive thin film was prepared in this study using DC and RF magnetron co-sputtering from Ni0.45-Cr0.27-Mn0.13-Y0.16 cast alloy and niobium targets. The electrical properties and microstructures of Ni-Cr-Mn-Y films with Nb addition under various annealing temperatures were investigated. The phase evolution, microstructure and composition of Ni-Cr-Mn-Y and Ni-Cr-Mn-Y-Nb films were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), field-emission transmission electron microscopy (HRTEM). All Ni-Cr-Mn-Y-Nb films annealed at 300 °C exhibited an amorphous structure. The Ni17Y12 crystalline phase was observed in Ni-Cr-Mn-Y-Nb films with or without lower Nb content when annealed at 400 °C. When the annealing temperature was set to 300 °C, the Ni-Cr-Mn-Y films exhibited a resistivity ∼480 μΩ-cm with the temperature coefficient of resistance (TCR) at +30 ppm/°C. However, Ni-Cr-Mn-Y films with 14 at.% Nb exhibited the smallest temperature coefficient of resistance (+5 ppm/°C) with the resistivity ∼585 μΩ-cm after annealing at 300 C in air.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Shape Memory Alloy Transformations · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. TCR control of Ni-Cr resistive film deposited by DC magnetron sputtering10.1016/j.vacuum.2015.05.026 ↗
2. Bhatt · 1984 · 370
3. Super precision metal film resistors
4. Influence of deposition and processing parameters on the TCR of Ni-Cr-Cu-Al alloy film resistors10.1109/TPMP.1969.1136070 ↗
5. Modifications test of vacuum deposition Ni/Cr films with Mn and Si for thin film resistors
6. Investigation on powder metallurgy Cr–Si–Ta–Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance10.1016/j.matdes.2009.09.012 ↗
7. Nanostructured high entropy alloys with multi-principal elements-novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
8. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
9. Deviations from Matthiessen's rule for the electrical resistivity of dislocations10.1088/0305-4608/16/6/014 ↗
10. Thermal effects on the electrical degradation of thin film resistors10.1016/S0378-4371(98)00594-9 ↗
11. The effect of composition on the temperature coefficient of resistance of NiCr films10.1088/0508-3443/16/11/315 ↗
12. A study of electrical conduction in island structure nickel and 80:20 nickel-chromium films10.1016/0040-6090(68)90023-0 ↗
13. Structural and electrical properties of evaporated Cr-Ni films as a function of gas pressure10.1016/0040-6090(73)90010-2 ↗
14. The electrical and compositional structure of thin Ni-Cr films10.1016/0040-6090(79)90176-7 ↗
15. Crystallization of amorphous sputtered 55%Cr–45%Ni thin films10.1016/0040-6090(82)90154-7 ↗
16. Developments of the physical and electrical properties of NiCr and NiCrSi single-layer and Bi-Layer nano-scale thin-film resistors
17. Electrical properties of sputtered Ni-Cr-Al-Cu thin film resistors with Ni and Cr contents
18. Study of thin film resistors prepared using Ni-Cr-Si-Al-Ta high entropy alloy
19. Fabrication and characterization of Ni-Cr alloy thin films for application to precision thin film resistors10.5370/JEET.2007.2.4.525 ↗
20. Structural and electrical properties of sputtered CrNi films10.1116/1.1316651 ↗
21. Electrical properties and structural defects of Ni-Cr thin films10.1016/0040-6090(86)90043-X ↗
22. Crystallization of amorphous sputtered 55% Cr - 45% Ni thin films10.1016/0040-6090(82)90154-7 ↗
23. Higher permittivity rare earth doped HfO2for sub-45-nm metal-insulator-semiconductor devices10.1063/1.2768002 ↗
24. Facile preparation andbifunctional imaging of Eu-doped GdPO4nanorods with MRI and cellularluminescence10.1039/C4DT03444A ↗
25. Effect of yttrium-doping on the microstructures and semiconductor-metal phase transition characteristics of polycrystalline VO2 thin films10.1016/j.apsusc.2015.10.179 ↗
26. The role of aluminum in the crystallization of Cr-Si-Ni resistive films10.1016/S0921-5093(02)00153-3 ↗
27. TCR control of Ni-Cr resistive film deposited by DC magnetron sputtering10.1016/j.vacuum.2015.05.026 ↗
28. The electrical and compositional structure of thin Ni–Cr films10.1016/0040-6090(79)90176-7 ↗
29. Solid solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
30. High-strength low-alloy (HSLA) steels
31. Synthesis and characterization of high-entropy alloy AlXFeCoNiCuCr by laser cladding10.1155/2011/485942 ↗
32. Thermal stability and performance of NbSiTaTiZr high-entropy alloy barrier for copper metallization10.1149/2.056111jes ↗
33. Fabrication and characterization of Ni-Cr alloy thin films for application to precision thin film resistors10.5370/JEET.2007.2.4.525 ↗
34. Microstructure and electrical characteristics of Ni-Cr thin films10.1016/j.tsf.2007.03.011 ↗