The effect of nano Zirconium dioxide and drilling on the buckling strength of epoxy based nanocomposites
Source abstract
Abstract
Abstract In the current research, the effect of nano Zirconium dioxide (ZrO2) on the buckling strength of epoxy resin based composite was studied experimentally before and after applying damage. The nano particles were added to the epoxy resin matrix with 1–4 wt% of the composite. The applying damage to the samples was made with two kinds of cutting drilling tools: flat end and ball end drilling tools and with 1.5 and 3 mm depth of hole. The buckling tests were done for neat epoxy composites without nano particles and for nano composite samples before and after drilling and compared with each other. The results obtained from tests showed a good enhancement on the buckling strength of nano composites about 50% for samples with 3 wt% of nano Zirconium dioxide. Also, the drilling process, was decreased the strength of composites, but the adding nano Zirconium dioxide retrieved this failure and increased the buckling strength of nano composite after drilling in comparison with the neat samples. Finally, the SEM showed a good dispersion of nano particles in the epoxy matrix and made a smooth surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Epoxy Resin Curing Processes · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Experimental and analytical study of buckling strength of new quaternary hybrid nanocomposite using Taguchi method for optimization10.1016/j.conbuildmat.2015.04.018 ↗
2. Experimental and optimizing flexural strength of epoxy-based nanocomposite: effect of using nano silica and nano clay by using response surface design methodology10.1016/j.matdes.2014.11.062 ↗
3. ZIF-8-Based membranes for carbon dioxide capture and separation10.1021/acssuschemeng.7b03613 ↗
4. The effect of hyperbranched polyester and zirconium slag nanoparticles on the impact resistance of epoxy resin thermosets10.1016/j.compositesb.2015.04.048 ↗
5. Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles10.1016/j.polymer.2015.01.036 ↗
6. Improvement of tensile properties and toughness of an epoxy resin by nano zirconium-dioxide reinforcement10.1007/s10853-008-2547-8 ↗
7. Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite10.1016/j.conbuildmat.2015.01.013 ↗
8. Augmenting epoxy toughness by combination of both thermoplastic and nano layered materials and using artificial intelligence techniques for modeling and optimization10.1007/s10965-013-0135-3 ↗
9. Fatigue behaviour of nanoclay reinforced epoxy resin composites10.1016/j.compositesb.2013.04.003 ↗
10. Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling10.1016/j.conbuildmat.2011.12.105 ↗
11. Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content10.1016/j.actamat.2005.12.009 ↗
12. Static and dynamic material properties of CFRP/epoxy laminates10.1016/j.conbuildmat.2016.04.003 ↗
13. Effect of silica nanoparticle size on toughening mechanisms of filled epoxy10.1016/j.polymer.2012.02.052 ↗
14. 14-Mechanical properties of structurally stitched non-crimp fabric composites
15. Effects of carbon nanotube enrichment of epoxy resins on hybrid FRP–FR confinement of concrete10.1016/j.compositesb.2013.09.044 ↗
16. The buckling strength of the new hybrid nanocomposite laminates using combination of layered and particulate nano fillers10.1177/1687814016668706 ↗
17. The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers10.1007/s10853-005-7261-1 ↗
18. Experimental study and optimization of damping properties of epoxy-based nanocomposite: effect of using nanosilica and high-impact polystyrene by mixture design approach10.1016/j.matdes.2014.10.022 ↗
19. Friction and wear behavior of zirconium oxide reinforced PMMA composites10.1016/j.compositesb.2013.08.015 ↗
20. Elastic properties and buckling load evaluation of ceramic particles filled glass/epoxy composites10.1016/j.compositesb.2013.11.016 ↗
21. Effect of chemically modified nano zirconia addition on properties of LLDPE/LDPE/PLA/MA-g-PE bio-nanocomposite blown films for packaging applications international
22. 4-Buckling and compressive strength of laminates with optimized fibre-steering and layer-stacking for aerospace applications
23. Buckling analysis of the composite plates with delaminations10.1016/j.commatsci.2010.08.004 ↗
24. Thermal buckling and post buckling of functionally graded fiber-reinforced composite laminated plates10.1177/0021998312458131 ↗
25. Analysis of buckling load of glass fiber/epoxy-reinforced plywood and its temperature dependence10.1177/0021998313495071 ↗
26. Compression behavior of laminated composites subjected to damage induced by low velocity impact and drilling10.1016/j.compositesb.2013.09.017 ↗
27. Investigating the mechanical properties of single walled carbon nanotube reinforced epoxy composite through finite element modelling10.1016/j.compositesb.2014.11.020 ↗
28. Drilling tool geometry evaluation for reinforced composite laminates10.1016/j.compstruct.2009.10.035 ↗
29. A comparative evaluation of properties of zirconia reinforced high impact acrylic resin with that of high impact acrylic resin10.1016/j.sjdr.2015.02.003 ↗
30. Drilling of composite structures10.1016/S0263-8223(01)00040-X ↗
31. Behaviour of composite plates with drilled and moulded hole under tensile load10.1016/j.compstruct.2011.03.027 ↗
32. Damage development in drilling glass fibre reinforced plastics10.1016/0890-6955(94)00055-O ↗
33. Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study10.1016/S0261-3069(03)00062-1 ↗
34. Influence of nanoparticles on the interfacial properties of fiber-reinforced-epoxy composites10.1016/j.compositesa.2017.03.007 ↗
35. Compressive properties of nanoparticle modified epoxy resin at different strain rates10.1016/j.compositesb.2013.10.002 ↗
36. Corrosion and wear resistance behavior of nano-silica epoxy composite coatings10.1016/j.porgcoat.2015.01.005 ↗
37. Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content10.1016/j.ijfatigue.2014.08.007 ↗
38. Modelling impact damage in composite laminates: a simulation of intra- and inter-laminar cracking10.1016/j.compstruct.2014.03.052 ↗
39. Effect of drilling parameters on the finish and mechanical properties of GFRP composites10.1016/0890-6955(90)90043-I ↗
40. Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills10.1016/S1359-835X(00)00069-5 ↗
41. A review of mechanical drilling for composite laminates10.1016/j.compstruct.2011.11.024 ↗
42. Analytical modelling of high-velocity impacts on thin woven fabric composite targets10.1016/j.compstruct.2015.06.078 ↗
43. Compression behavior of laminated composites subjected to damage induced by low velocity impact and drilling10.1016/j.compositesb.2013.09.017 ↗