journal article·2018-10

Hybrid organo-montmorillonite produced by simultaneous intercalation of phosphonium and ammonium/amine based surfactants

Jefferson Lopes Alves, Paulo de Tarso Vieira e Rosa, Ana Rita Morales

Publisher page

Abstract

Abstract This study describes the preparation and characterization of hybrid organo-modified montmorillonite (OMt) produced by intercalation of phosphonium-based plus ammonium and/or amine-based surfactants, aiming to improve thermal and compatibility properties for the manufacture of clay mineral polymer nanocomposites (CPN). The choice of the surfactants was based on previous studies, which have pointed out that the phosphonium-based surfactant provided the clay mineral a high thermal stability but low d001-value and hydrophobicity. On the other hand, ammonium-based compounds presented inverse properties, i.e., low thermal stability and high d001-value. The present work was supported by design of experiments (DOE) considering different surfactant concentrations. The materials were analyzed by thermogravimetric analysis (TGA) to evaluate the thermal stability and relative reactional yield, by X-ray diffraction (XRD), to evaluate the surfactant intercalation by d001 of the clay, also by Fourier-transform infrared spectroscopy (FTIR) and contact angle, to verify the components interaction and the hydrophobicity. The hybrid montmorillonites presented intermediate properties, as thermal stability and basal space, when compared with the clay modified by the single modifiers. The intercalated species were arranged in paraffin-type structure and their conformation and tilt angle changed by increasing the ammonium concentration. Statistical analysis allowed knowing the concentration effects of each surfactant on hybrid materials. From the statistical models, an optimized formulation considering the maximum d001-value, Tonset (initial temperature of thermal degradation) and yield responses was prepared, which had its significance tested by Anova and F-test, and was validated by experimental values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Bergaya · 2006
2. Utracki · 2004
3. Clays for polymeric nanocomposites10.1002/pen.21807 ↗
4. Effect of anionic organoclay with special aggregate structure on the flame retardancy of acrylonitrile–butadiene–styrene/clay composites10.1016/j.polymdegradstab.2009.12.009 ↗
5. Effect of organoclay mixture on the rheological properties of ABS-clay nanocomposites10.1002/masy.201100165 ↗
6. Shah · 2016
7. Rheological properties of poly(lactic acid) based nanocomposites: effects of different organoclay modifiers and compatibilizers10.1002/app.42915 ↗
8. Influence of clay organic modifier on the thermal-stability of PLA based nanocomposites10.1016/j.clay.2013.12.005 ↗
9. Effects of organoclays on the thermal processing of pe/clay nanocomposites10.1007/s10973-006-7504-7 ↗
10. Synthesis of an intercalated compound of montmorillonite and 6-polyamide10.1007/BF00664105 ↗
11. Polymer nanocomposites from modified clays: recent advances and challenges10.1016/j.progpolymsci.2015.10.001 ↗
12. A comparative study of different routes for the modification of montmorillonite with ammonium and phosphonium salts10.1016/j.clay.2016.07.018 ↗
13. Thermal degradation chemistry of alkyl quaternary ammonium montmorillonite10.1021/cm010305s ↗
14. Thermal stability of quaternary phosphonium modified montmorillonites10.1021/cm020705v ↗
15. Evaluation of organic modification of montmorillonite with ionic and nonionic surfactants10.1016/j.clay.2017.09.001 ↗
16. Nonionic organoclay: a “Swiss Army knife” for the adsorption of organic micro-pollutants?
17. Preparations of organobentonite using nonionic surfactants10.1016/S0045-6535(00)00564-6 ↗
18. Modification of bentonites with nonionic surfactants for use in organic-based drilling fluids10.1016/j.clay.2014.04.021 ↗
19. Synthesis of some surfactants based on polytriethanolamine and investigation of their surface active properties10.1080/01932690903227584 ↗
20. Interactions of alkylamines with different types of layered compounds10.1016/0167-2738(86)90057-3 ↗
21. Concentration-dependent conformation of alkyl tail in the nanoconfined space: hexadecylamine in the silicate galleries10.1021/la026481c ↗
22. Mechanisms of interaction between montmorillonite and 3-aminotriazole10.1180/claymin.1991.026.2.10 ↗
23. Smith · 1968 · 161
24. Solomons · 2001
25. Modification of montmorillonite with aminopropylisooctyl polyhedral oligomeric silsequioxane10.1016/j.jcis.2009.02.014 ↗
26. Organoclay polybutylene terephthalate nanocomposites using dual surfactant modified montmorillonite prepared by the masterbatch method
27. Preparation and research of anionic and cationic secondary modified organophilic montmorillonite10.4028/www.scientific.net/AMR.396-398.417 ↗
28. Investigation of structure and thermal stability of surfactant-modified Al-pillared montmorillonite
29. Montmorillonite modified by cationic and nonionic surfactants as high-performance fluid-loss-control additive in oil-based drilling fluids10.1080/01932691.2014.917052 ↗
30. Influence of different exchangeable cations (Li + , Na + and Ca 2+ ) on the modification effects and properties of organomontmorillonites used in oil-based drilling fluids/muds10.1039/C5RA14196F ↗
31. Investigation on the co-modification process of montmorillonite by anionic and cationic surfactants10.1016/j.clay.2016.08.025 ↗
32. Sequential modification of montmorillonite with dimethyl dioctadecyl ammonium chloride and benzyl octadecyl dimethyl ammonium chloride for removal of perchlorate10.1016/j.micromeso.2015.12.030 ↗
33. The sequential intercalation of three types of surfactants into sodium montmorillonite10.1016/j.clay.2015.08.003 ↗
34. Study of selection and purification of Brazilian bentonite clay by elutriation: a XRF, SEM and Rietveld analysis10.1590/0366-691320 ↗
35. Partially exchanged organophilic bentonites - Part I. characterization by thermal analysis on calcined mass basis10.1007/s10973-010-1254-2 ↗
36. Equation of state for interfacial tensions of solid-liquid systems10.1016/0001-8686(92)80064-5 ↗