journal article·2019-06

Structural consequences of the fluorides using in the synthesis of SBA-15 mesostructured silica

V.A. Parfenov, I.V. Ponomarenko, S.A. Novikova

Publisher page

Abstract

Abstract The effect of fluoride presence in a synthesis mixture on the parameters of the fine structure of SBA-15 has been studied. The amount of fluorides, the addition stage and the duration of the hydrothermal stabilization of the structure have been varied. Fluoride addition during SBA-15 synthesis increases the material formation rate and decreases the ordering duration of the highly organized mesostructure. During hydrothermal treatment under conventional conditions, fluorides cause a restructuring of the micropore system. There is micropore merging into relatively large coalesced micropores inside the silicate wall, that are practically undetected by t-plot or α-S methods due to the high ratio of the pore diameter to its length. The addition of fluoride results in a decrease in the thickness of the silica wall and an increase in the mesopores diameter as well as the cell parameter of the final product.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mesoporous Materials and Catalysis · Zeolite Catalysis and Synthesis · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Ordered mesoporous molecular-sieves synthesized by a liquid-crystal template mechanism10.1038/359710a0 ↗
2. A new family of mesoporous molecular-sieves prepared with liquid-crystal templates10.1021/ja00053a020 ↗
3. Periodic mesoporous organic-inorganic hybrid materials: applications in membrane separations and adsorption10.1016/j.micromeso.2010.02.007 ↗
4. Defect-sealing synthesis of vertically oriented ordered mesoporous silica membranes10.1007/s10853-013-7774-y ↗
5. Amine-modified ordered mesoporous silica: the effect of pore size on CO2 capture performance10.1016/j.apsusc.2014.10.135 ↗
6. Peculiarities of functionalization of mesostructured silicates MCM-41 and SBA-15 by a sulfide modifier10.1134/S1087659614010143 ↗
7. Novel amine modified nanoporous SBA-15 sorbent for the removal of H2S from gas streams in the presence of CH4
8. Synthesis, characterization and catalytic application of ordered mesoporous silica nanocomposites functionalized with chloroacetic acid (SBA-15/CA)10.5185/amlett.2013.icnano.113 ↗
9. Ordered mesoporous porphyrinic carbons with very high electrocatalytic activity for oxygen reduction reaction10.1038/srep02715 ↗
10. TiO2 nanoparticles doped SiO2 films with ordered mesopore channels: a catalytic nanoreactor10.1039/c3dt53265h ↗
11. Phospho-directed macroporous alumina-silica nanoreactor with multi-functions10.1021/nn900739z ↗
12. TEM studies of zeolites and ordered mesoporous materials10.1016/j.micron.2010.12.005 ↗
13. Effects of the nature of the aluminum source on the acidic properties of some mesostructured materials10.1016/S1387-1811(98)00201-7 ↗
14. Lewis acidic Sn(IV) centers – grafted onto MCM-41 – as catalytic sites for the Baeyer-Villiger oxidation with hydrogen peroxide10.1016/S0021-9517(03)00190-8 ↗
15. Effect of added metal chelating organosilane on mesoporous titanosilicate formation properties10.1039/b306114k ↗
16. Single crystal particles of a mesoporous mixed transition metal oxide with a wormhole structure10.1039/b104516b ↗
17. Formation of mesoporous Co3O4 replicas of different mesostructures with different pore sizes10.1016/j.micromeso.2009.04.017 ↗
18. Synthesis of new, nanoporous carbon with hexagonally ordered mesostructured10.1021/ja002261e ↗
19. Synthesis of highly ordered mesoporous polymer networks10.1039/b108207h ↗
20. Mesoporous systems for poorly soluble drugs10.1016/j.ijpharm.2012.09.008 ↗
21. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges10.1016/j.progpolymsci.2011.01.003 ↗
22. Synthesis and characterization of large mesoporous silica SBA-15 sheets with ordered accessible 18 nm pores10.1016/j.matlet.2009.07.013 ↗
23. The effects on pore size and particle morphology of heptane additions to the synthesis of mesoporous silica SBA-1510.1016/j.micromeso.2010.04.016 ↗
24. Initial stages of SBA-15 synthesis: an overview10.1016/j.cis.2008.05.003 ↗
25. Amino-functionalized mesoporous silica as base catalyst and adsorbent10.1016/j.apcata.2012.02.004 ↗
26. Improving the hydrothermal stability of mesoporous silica SBA-15 by pre-treatment with (NH4)2SiF6
27. Hydrothermal stability of mesostructured silicate MCM-41 in connection with pathways synthesis
28. A continuous electron density approach in Rietveld analysis for structure investigations of the mesoporous silicate materials
29. Nonionic triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered, hydrothermally stable, mesoporous silica structures10.1021/ja974025i ↗
30. Synthesis of ultra-large-pore SBA-15 silica with two-dimensional hexagonal structure using triisopropylbenzene as micelle expander10.1021/cm8012733 ↗
31. Facile method to synthesize platelet SBA-15 silica with highly ordered large mesopores10.1016/j.jcis.2011.05.076 ↗
32. Fluoride-induced hierarchical ordering of mesoporous silica in aqueous acid-syntheses10.1002/(SICI)1521-4095(199903)11:4<303::AID-ADMA303>3.0.CO;2-M ↗
33. Fluoride ions assistant synthesis of extremely hydrothermal stable Al-SBA-15 with controllable Al content, Micropor10.1016/j.micromeso.2010.12.020 ↗
34. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
35. X-ray structural modeling of silicate mesoporous mesophase material10.1016/S1387-1811(01)00164-0 ↗
36. Full-profile refinement by derivative difference minimization10.1107/S0021889804015638 ↗
37. Improvement of the Kruk-Jaroniec-Sayari method for pore size analysis of ordered silicas with cylindrical mesopores10.1021/la0609571 ↗
38. Rapid synthesis of SBA-15 rods with variable lengths, widths, and tunable large pores10.1021/la104864d ↗
39. Mechanism of mesoporous silica formation. A time-resolved NMR and TEM study of silica-block copolymer aggregation10.1021/la030173c ↗
40. In situ synchrotron small-angle X-ray scattering/X-ray diffraction study of the formation of SBA-15 mesoporous silica10.1021/la049637c ↗
41. Characterization of the initial stages of SBA-15 synthesis by in situ time-resolved small-angle X-ray scattering10.1021/jp052786z ↗
42. Monitoring MCM-41 synthesis by X-ray mesostructure analysis10.1016/j.micromeso.2014.04.012 ↗
43. Is the BET equation applicable to microporous adsorbents?10.1016/S0167-2991(07)80008-5 ↗
44. Characterization of micro- and mesoporosity in SBA-15 materials from adsorption data by the NLDFT method10.1021/jp010621u ↗
45. Platinum nanoparticles encapsulated in mesoporous silica: preparation, characterisation and catalytic activity in toluene hydrogenation10.1016/j.micromeso.2005.06.037 ↗
46. Evidence for general nature of pore interconnectivity in 2-dimensional hexagonal mesoporous silicas prepared using block copolymer templates10.1021/jp013583n ↗
47. Short synthesis of ordered silicas with very large mesopores10.1039/C3RA44203A ↗
48. Application of large pore MCM-41 molecular sieves to improve pore size analysis using nitrogen adsorption measurements10.1021/la970776m ↗
49. Recent advances in adsorption characterization of mesoporous molecular sieves10.1016/S0167-2991(00)80261-X ↗
50. Mesotunnels on the silica wall of ordered SBA-15 to generate three-dimensional large-pore mesoporous network10.1021/ja011564l ↗
51. A systematic study of long-range ordered 3D-SBA-15 materials by electron tomography10.1039/c1nj20146h ↗