journal article·2020-01

Synthesis and characterization of alpha alumina-natural apatite based porous ceramic support for filtration application

Youssef Guesmi, Ridha Lafi, Hassen Agougui, Mahjoub Jabli, Abdallah Oun, Swachchha Majumdar, Amor Hafiane

Publisher page

Abstract

Abstract The present study reported the synthesis of low-cost ceramic membrane supports. They were prepared by an extrusion method using alumina/natural apatite blends and further consolidated by heat treatment. The chemical composition, structure and particle size of the starting materials were analyzed. The effect of the natural apatite content, as sintering agent, on the microstructure, porosity, flexural strength and linear shrinkage of the prepared supports were studied as a function of sintering temperature. The microstructure exhibited that the sintering temperature decreased with the increment of the apatite content. The porosity and the pore size were controlled by the sintering temperature and the apatite amount added to the starting mixture. The mechanical strength and the linear shrinkage increased with increasing the apatite and the firing temperature. The sample selected for filtration displayed good porosity (45.38%) and pore size of 1.35 μm giving a high permeability 959.64 L h−1m−2bar−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Dielectric materials and actuators · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Membrane separations and energy efficiency10.1016/j.memsci.2017.11.035 ↗
2. Ceramic membranes for environmental related applications
3. Global characteristics and trends of research on ceramic membranes from 1998 to 2016: based on bibliometric analysis combined with information visualization analysis10.1016/j.ceramint.2018.01.121 ↗
4. Scott · 1995 · 373
5. Elaboration and chemical corrosion resistance of tubular macro-porous cordierite ceramic membrane supports10.1016/j.memsci.2007.06.058 ↗
6. Preparation and development of porous ceramic membrane supports fabricated by extrusion technique
7. An overview of production and development of ceramic membranes
8. Highly porous α-Al2O3 ceramics obtained by sintering atomic layer deposited inverse opals10.1016/j.ceramint.2017.05.176 ↗
9. Permeation properties of silica-zirconia composite membranes supported on porous alumina substrates10.1016/j.memsci.2016.12.023 ↗
10. Preparation and properties of supported 100% titania ceramic membranes10.1016/j.materresbull.2007.06.041 ↗
11. Synthesis of nanoparticle copolymer brushes via surface-initiated seATRP10.1021/acs.macromol.7b00280 ↗
12. Effect of TiO2 doping on the characteristics of macroporous Al2O3/TiO2 membrane supports10.1016/j.jeurceramsoc.2009.12.011 ↗
13. Preparation of cordierite-based porous ceramic micro-filtration membranes using waste fly ash as the main raw materials10.1016/j.memsci.2006.08.032 ↗
14. Fabrication and characterization of a ceramic membrane from clay and banana peel powder: application to industrial wastewater treatment10.1016/j.matchemphys.2019.02.011 ↗
15. Fabrications and applications of low cost ceramic membrane from kaolin10.1016/j.ceramint.2017.12.215 ↗
16. Apatites: a new family of catalysts in organic synthesis10.1016/j.jorganchem.2015.01.018 ↗
17. Synthesis of hydroxyapatite-sodium alginate via a co-precipitation technique for efficient adsorption of Methylene Blue dye10.1016/j.molliq.2017.11.113 ↗
18. Study on the stability of suspensions based on biomimetic apatites aimed at biomedical applications10.1016/j.powtec.2013.08.008 ↗
19. Elaboration and characterisation of apatite based mineral supports for microfiltration and ultrafiltration membranes10.1016/j.ceramint.2005.10.001 ↗
20. Preparation and characterization of microfiltration apatite membrane over low cost clay-alumina support for decolorization of dye solution10.1080/19443994.2016.1186565 ↗
21. Improvement of microcracks resistance of porous aluminium titanate ceramic membrane support using attapulgite clay as additive10.1016/j.ceramint.2017.10.154 ↗
22. Design and characterization offlat membrane supportselaborated from kaolin and aluminum powders10.1016/j.crci.2015.10.011 ↗
23. New clay-alumina porous capillary supports for filtration application10.1016/j.memsci.2011.12.010 ↗
24. Manufacture of macroporous calcium hydroxyapatite bioceramics10.1016/S0955-2219(99)00131-4 ↗
25. Elaboration and properties of new ceramic microfiltration membranes from natural and synthesised apatite10.1016/j.desal.2005.03.097 ↗
26. Sintering, crystallization, and properties of B2O3/P2O5-doped Li2O.Al2O3.4SiO2 glass-ceramics10.1111/j.1151-2916.1995.tb08630.x ↗
27. The affect of densification and dehydroxylation on the mechanical properties of stoichiometric hydroxyapatite bioceramics10.1016/j.materresbull.2010.06.040 ↗
28. Elaboration and characterization of microfiltration and ultrafiltration membranes deposited on raw support prepared from natural Moroccan clay: application to filtration of solution containing dyes and salts10.1016/j.clay.2005.07.002 ↗
29. Recycling of fly ash for preparing porous mullite membrane supports with titania addition10.1016/j.jhazmat.2010.04.010 ↗
30. Dependence of mechanical strength of brittle polycrystalline specimens on porosity and grain size10.1111/j.1151-2916.1959.tb13596.x ↗
31. Effects of starch addition on characteristics of tubular porous ceramic membrane substrates10.1016/j.desal.2007.09.035 ↗
32. Porous ceramic from Moroccan natural phosphate and raw clay for microfiltration applications10.5004/dwt.2017.20832 ↗