A simple route to prepare anatase TiO2 film onto polyimide substrate by DC pulsed magnetron sputtering
Source abstract
Abstract
Abstract TiO2 film was deposited onto polyimide substrate by DC pulsed magnetron sputtering with different sputtering power densities. XRD results showed that with increasing the sputtering power density from 0.83 W/cm2 to 5.00 W/cm2, the crystallinity of as-deposited TiO2 film improved monotonously. And 5.00 W/cm2 was determined as the critical sputtering power density in which the highest temperature the substrate could withstand. Then, XRD and TEM results showed that the as-deposited TiO2 film could have a better anatase structure by providing an auxiliary heating to the substrate at the highest temperature during TiO2 film deposition. Combining the sputtering parameters, as well as DC pulsed voltage waveform, the reason for as-deposited TiO2 film crystallization was investigated systematically.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · TiO2 Photocatalysis and Solar Cells · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Titanium oxide thin films synthesis by pulsed-DC magnetron sputtering10.1016/j.vacuum.2009.01.033 ↗
2. The relationship between carrier mobility and bicrystalline grains boundary of rutile TiO2 film
3. Effect of oxygen partial pressure on properties of asymmetric bipolar pulse dc magnetron sputtered TiO2 thin films10.1364/AO.54.003817 ↗
4. High-rate low-temperature dc pulsed magnetron sputtering of photocatalytic TiO2 films: the effect of repetition frequency10.1007/s11671-007-9042-z ↗
5. Photocatalytic TiO2 thin film deposited onto glass by DC magnetron sputtering10.1016/S0040-6090(01)01054-9 ↗
6. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
7. Photovoltaics. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
8. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
9. Solar cells: nanosized anatase TiO2 single crystals with tunable exposed (001) facets for enhanced energy conversion efficiency of dye-sensitized solar cells10.1002/adfm.201100828 ↗
10. Synthesis and photocatalytic properties of dense and porous TiO2-anatase thin films prepared by sol-gel10.1016/j.apcatb.2008.07.021 ↗
11. Titanium dioxide Nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
12. Synthesis of free-standing anatase TiO2 membrane by using two-step anodization10.1016/j.matlet.2018.08.116 ↗
13. Titanium dioxide nanomaterials for sensor applications10.1021/cr400625j ↗
14. Surfactant-free synthesis of pure anatase TiO2 nanorods suitable for dye-sensitized solar cells10.1039/c0jm01167c ↗
15. Sol-flame synthesis: a general strategy to decorate nanowires with metal oxide/noble metal nanoparticles10.1021/nl300060b ↗
16. Growth of TiO2 nanorods by metalorganic chemical vapor deposition10.1016/S0022-0248(03)01339-3 ↗
17. Synthesis of well-dispersed TiO2/CNTs@CoFe2O4 nanocomposites and their photocatalytic properties10.1016/j.materresbull.2018.01.017 ↗
18. Graphene-titanium dioxide nanocomposite based hypoxanthine sensor for assessment of meat freshness10.1016/j.bios.2016.03.041 ↗
19. Nitrogen-doped titanium dioxide as visible-light-sensitive photocatalyst: designs, developments, and prospects10.1021/cr5000738 ↗
20. Periodic TiO2 nanorod arrays with hexagonal nonclose-packed arrangements: excellent field emitters by parameter optimization10.1002/adfm.200801857 ↗
21. Reusable photocatalytic titanium dioxide-cellulose nanofiber films10.1016/j.jcis.2013.02.035 ↗
22. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO210.1039/C4CP02201G ↗
23. Effect of calcinations on electrical properties of TiO2 nanotubes10.1063/1.4759358 ↗
24. Poisoning prevention of TiO2 photocatalyst coatings sputtered on soda-lime glass by intercalation of SiNx diffusion barriers10.1016/j.surfcoat.2007.03.003 ↗
25. A simple route to prepare (100) preferred orientation indium tin oxide film onto polyimide substrate by direct current pulsed magnetron sputtering10.1016/j.matchemphys.2018.01.036 ↗
26. The influence of anatase titanium dioxide film (001) preferred orientation on N implantation process10.1016/j.matlet.2017.03.149 ↗
27. Study on the chemical bond structure and chemical stability of N doped into TiO2 film by N ion beam implantation10.1049/mnl.2016.0322 ↗
28. 2000
29. Nd: YVO4, thin films grown by pulsed laser deposition: effects of temperature and pressure on the grain morphology and microstructure10.1021/cm0012466 ↗
30. Syntheses, Li insertion, and photoactivity of mesoporous crystalline TiO210.1002/adfm.200900658 ↗