journal article·2018-09

Evaluation of Cu(Ti) and Cu(Zr) alloys in barrier-less Cu metallization

Fei Cao, Ying Wang, Fu-yin Li, Bin-han Tang

Publisher page

Abstract

Abstract The thermal properties of Cu(Ti)/SiO2 and Cu(Zr)/SiO2 systems have been investigated to evaluate the potential application for Cu metallization. Cu(Ti) and Cu(Zr) alloy films were directly deposited on SiO2/Si substrates and subsequently annealed in vacuum at various temperatures of 300°C–700 °C for 1 h. The microstructure, interface characteristics, and electrical properties of both samples were measured using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscope (TEM) and leakage currents detector. Results suggest that Cu alloy films have strong Cu(111) texture after the addition of a small amount of Zr or Ti.The sharp decline of Cu and Si concentrations at the interface suggest that both Ti and Zr addition can prevent the inter-diffusion between Cu and substrate. The leakage current densities of Cu(Zr) and Cu(Ti) show that Zr is more stable element to self-forming diffusion layer for advanced Cu interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Effect of thin V insertion layer into Ta film on the performance of Ta diffusion barrier in Cu metallization10.1063/1.370209 ↗
2. Diffusion barrier performance of TiVCr alloy film in Cu metallization10.1016/j.apsusc.2010.12.149 ↗
3. Performance improved by incorporating of Ru atoms into Zr-Si diffusion barrier for Cu metallization
4. Ultrathin Cr added Ru film as a seedless Cu diffusion barrier for advanced Cu interconnects10.1016/j.apsusc.2012.04.046 ↗
5. Microstructure and properties of Cu-C pseudoalloy films prepared by sputter deposition10.1007/s11661-998-0145-7 ↗
6. Characterizations of super hard Cu films containing insoluble W prepared by sputter deposition10.1016/S0254-0584(01)00454-0 ↗
7. Application of Cu-C and Cu-V alloys in barrier-less copper metallization10.1016/j.vacuum.2015.09.011 ↗
8. Evaluation of self-forming barrier for Cu(V) metallization10.1016/j.jallcom.2015.10.158 ↗
9. Influence of field-assistant annealing on Cu(V) barrier-less metallization10.1016/j.vacuum.2015.12.019 ↗
10. Feasibility study on the use of Cu(Co) alloy for barrierless copper metallization10.1016/j.tsf.2015.12.065 ↗
11. Thermal stability enhancement of Cu interconnects by employing a self-aligned MgO layer obtained from a Cu (Mg) alloy film10.1143/JJAP.40.2408 ↗
12. Evaluation of DC-sputtered glassy TaCoN thin film for copper metallization10.1007/s11664-007-0268-4 ↗
13. Stress effects in thermal cycling of copper (magnesium) thin films10.1063/1.113907 ↗
14. Thermal and electrical stability of TaNx diffusion barriers for Cu metallization10.1007/s10853-012-6763-x ↗
15. Scanning transmission electron microscopy investigations of self-forming diffusion barrier formation in Cu (Mn) alloys on SiO210.1063/1.4822441 ↗
16. Effect of Mg content in Cu(Mg)/SiO2/Si multilayers on the resistivity after annealing in an oxygen ambient10.1116/1.1316101 ↗
17. Self-formed barrier with Cu-Mn alloy metallization and its effects on reliability
18. Low resistivity Fe–Co–B–Ti–Nb amorphous thin film as a copper barrier10.1016/j.jallcom.2012.10.190 ↗
19. Thermal stability of Ti, Pt, and Ru interfacial layers between seedless copper and a tantalum diffusion barrier10.1116/1.4792523 ↗
20. High-temperature self-grown ZrO2 layer against Cu diffusion at Cu (2.5 at.% Zr)/SiO2 interface10.1116/1.1839911 ↗
21. Effects of Ti addition on the morphology, interfacial reaction, and diffusion of Cu on SiO2
22. Highly stable carbon-doped Cu films on barrierless Si10.1016/j.apsusc.2010.11.095 ↗