journal article·2021-04

Evaluation of incipient oxidation behavior of ZrO2-Coated Zircaloy-4 by thermogravimetric analysis

I-Sheng Ting, Jia-Hong Huang

Publisher page

Abstract

Abstract The objectives of this study were to investigate the incipient oxidation behavior of ZrO₂-coated Zircaloy-4 (Zry-4), and evaluate the feasibility of producing ZrO₂ protective layer by vacuum annealing of ZrN coating. ZrO₂ coatings with tetragonal (t) and monoclinic (m) dominant phases were deposited on Zry-4 using unbalanced magnetron sputtering. The wettability tests and the widths of interdiffusion zones at film/substrate interface indicated the ZrO₂ coatings having good intrinsic adhesion on the Zry-4 substrate. The oxidation behavior of the coated specimens and blank Zry-4 substrate were evaluated by thermogravimetric analysis performed at 700, 800 and 900 °C in argon atmosphere. After oxidation, X-ray diffraction (XRD) patterns revealed that both thermally formed ZrO₂ and the deposited ZrO2 possessed an m-ZrO₂ dominant structure. The weight gain at 700 °C indicated no significant difference in the oxidation behavior between uncoated and ZrO₂-coated Zry-4, and the oxidation kinetics obeyed the parabolic law. However, the oxidation kinetics above 800 °C deviated from the parabolic law, where m-ZrO₂-coated Zry-4 showed the least weight gain at 800 °C, and t-ZrO₂-coated Zry-4 displayed a better oxidation resistance at 900 °C. Oxide nodules were observed on the uncoated Zry-4 specimens after oxidation; in contrast, the ZrO₂ coatings, both monoclinic and tetragonal phases, could act as a barrier to prevent the formation of oxide nodules. The azimuthal XRD cos2αsin2ψ technique was used to measure residual stress of t-ZrO₂ and m-ZrO₂ phases and reveal the distribution of each phase in the specimens. The results indicated that the oxide phases were not uniformly distributed in the specimens. The azimuthal XRD cos2αsin2ψ technique can be used as a convenient and nondestructive method to examine the uniformity of the phase distribution in a multi-phase oxide layer. The experimental results revealed that producing a ZrO₂ coating on Zry-4 by vacuum annealing of ZrN-coated Zry-4 was infeasible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Radiation embrittlement of nuclear reactor pressure vessel steels
2. Zirconium alloys for fuel element structures10.2533/000942905777675480 ↗
3. 2016
4. Waterside corrosion in zirconium alloys
5. Identification and quantification of hydride phases in Zircaloy-4 cladding using synchrotron X-ray diffraction10.1016/j.jnucmat.2009.04.004 ↗
6. Mechanisms of hydrogen induced delayed cracking in hydride forming materials10.1007/BF02644858 ↗
7. Delayed hydride cracking in irradiated zircaloy cladding
8. 2010
9. Effect of hydrogen contents on the mechanical properties of Zircaloy-410.1016/0022-3115(94)90208-9 ↗
10. Gaseous hydrogen embrittlement of a hydrided zirconium alloy10.1007/s11661-998-1014-0 ↗
11. Tung · Mater. Sci. Eng., A · 2016 · 659 · 17210.1016/j.msea.2016.02.051 ↗
12. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
13. Cladding for high performance fuel10.1016/j.pnucene.2011.10.008 ↗
14. Corrosion of ternary carbides by molten lead10.1016/j.jnucmat.2007.04.054 ↗
15. Cladding and duct materials for advanced nuclear recycle reactors
16. Zirconium alloys for supercritical water reactor applications: challenges and possibilities10.1016/j.jnucmat.2007.05.022 ↗
17. Corrosion and stress corrosion cracking in supercritical water10.1016/j.jnucmat.2007.05.017 ↗
18. Water chemistry in a supercritical water-cooled pressure tube reactor10.13182/NT12-A14093 ↗
19. Superior corrosion resistance properties of TiN-based coatings on Zircaloy tubes in supercritical water10.1016/j.jnucmat.2014.04.010 ↗
20. Sputter-deposited nitrides for oxidation protection in a steam environment at high temperatures10.1016/j.tsf.2019.137439 ↗
21. Study of the oxidation behavior of CrN coating on Zr alloy in air10.1016/j.jnucmat.2019.01.006 ↗
22. Multilayer (TiN, TiAlN) ceramic coatings for nuclear fuel cladding10.1016/j.jnucmat.2016.05.021 ↗
23. High temperature steam-oxidation behavior of arc ion plated Cr coatings for accident tolerant fuel claddings10.1016/j.surfcoat.2015.09.022 ↗
24. Phase transition and mechanical properties of ZrNxOy thin films on AISI 304 stainless steel10.1016/j.surfcoat.2011.06.051 ↗
25. Oxidation behavior and corrosion resistance of vacuum annealed ZrN-coated stainless steel10.1016/j.surfcoat.2018.11.054 ↗
26. Microstructural design of zirconia-toughened ceramics (ZTC)
27. Application of ZrO2 as a catalyst and a catalyst support10.1016/0920-5861(94)80003-0 ↗
28. Acid-base bifunctional catalysis by ZrO2 and its mixed oxides10.1016/0920-5861(94)80002-2 ↗
29. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
30. Effect of dopants on zirconia stabilization-an X-ray absorption study: I, trivalent dopants10.1111/j.1151-2916.1994.tb06964.x ↗
31. Role of anion vacancies in nitrogen-stabilized zirconia10.1111/j.1151-2916.1993.tb03660.x ↗
32. On the oxidation behavior of (Zr,Nb)2Fe under simulated nuclear reactor conditions10.1016/j.corsci.2016.08.006 ↗
33. A mechanism assessment for the anti-corrosion of zirconia coating under the condition of subcritical water corrosion10.1016/j.corsci.2019.03.009 ↗
34. Chiang · 1997
35. Stability of metastable tetragonal ZrO2 in compound powders and nucleation arguments10.1007/BF01045753 ↗
36. 1993
37. Studies of metal-water reactions at high temperatures
38. High-temperature oxidation of zircaloy in hydrogen-steam mixtures
39. High-temperature oxidation of zircaloy-2 and zircaloy-4 in steam10.1016/0022-3115(78)90006-5 ↗
40. The kinetics of total oxygen uptake in steam-oxidised zircaloy-2 in the range 1273-1673 K10.1016/0022-3115(80)90379-7 ↗
41. Oxidation reaction kinetics of Zircaloy-4 in an unlimited steam environment10.1016/0022-3115(76)90017-9 ↗
42. High-temperature oxidation kinetics of Zircaloy-4 in oxygen/argon mixtures10.1016/0022-3115(89)90563-1 ↗
43. Beitrag zur theorie des anlaufvorgangs10.1515/zpch-1933-2105 ↗
44. Oxidation kinetics of low-Sn Zircaloy-4 at the temperature range from 773 to 1,573K10.1080/18811248.2003.9715351 ↗
45. Oxidation kinetics of Zircaloy-4 and Zr-1Nb-1Sn-0.1Fe at temperatures of 700-1200°C10.1016/j.jnucmat.2004.08.007 ↗
46. The O-Zr (Oxygen-Zirconium) system10.1007/BF02881546 ↗
47. Determination of average X-ray strain (AXS) on TiN hard coatings using cos2αsin2ψ X-ray diffraction method10.1016/j.surfcoat.2014.12.009 ↗
48. Residual stress measurement on TiN thin films by combing nanoindentation and average X-ray strain (AXS) method10.1016/j.surfcoat.2015.08.059 ↗
49. Residual stress measurement in textured thin film by grazing-incidence X-ray diffraction10.1016/S0040-6090(02)00680-6 ↗
50. High-Resolution X-Ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
51. Phase analysis in zirconia systems10.1111/j.1151-2916.1972.tb11290.x ↗
52. Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
53. Shackelford · 2001
54. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
55. Trapped cracks at indentations: Part I Experiments on yttria-tetragonal zirconia polycrystals10.1007/BF01154691 ↗
56. Residual stresses in nitride hard coatings prepared by magnetron sputtering and arc evaporation10.1016/0257-8972(95)08235-2 ↗
57. Cardarelli · 2008
58. ASM International · 1990
59. A stabilization mechanism of zirconia based on oxygen vacancies only10.1016/S1359-6454(02)00385-3 ↗
60. Phenomenological study of in-reactor corrosion of zircaloy-4 in pressurized water reactors
61. Effect of alloying elements on uniform corrosion resistance of zirconium-based alloys in 360°C water and 400°C steam
62. Precipitate evolution in the Zircaloy-4 oxide layer10.1016/0022-3115(92)90385-X ↗
63. Oxidation of intermetallic precipitates in zircaloy-4: impact of irradiation
64. Role of the second-phase particles in zirconium binary alloys
65. Chemical diversity of iron species and structure evolution during the oxidation of C14 Laves phase Zr(Fe,Nb)2 in subcritical environment10.1016/j.corsci.2019.108218 ↗
66. Evolution of “Spinodal decomposition”-like structures during the oxidation of Zr(Fe,Nb)2 under subcritical environment10.1016/j.scriptamat.2020.06.018 ↗
67. Experiment and modeling of advanced fuel rod cladding behavior under LOCA conditions: alpha-beta phase transformation kinetics and EDGAR methodology
68. An experimental investigation into the oxidation of zircaloy-4 at elevated pressures in the 750 to 1000°C temperature range
69. Solubility limits and formation of intermetallic precipitates in ZrSnFeCr alloys
70. Formation of very large ‘blocky alpha’ grains in Zircaloy-410.1016/j.actamat.2017.03.002 ↗
71. Comparison of high-temperature steam oxidation kinetics under LWR accident conditions: zircaloy-4 versus austenitic stainless steel No. 1.4970