Electronic structural alterations in LiMn₂O₄ doped with cobalt and vanadium
Source abstract
Abstract
This study utilized Density Functional Theory (DFT) calculations, implemented through the Quantum ESPRESSO package, to assess the impact of cobalt and vanadium co-doping on the electrochemical performance and electronic structure of LiMn₂O₄ (LMO). Analysis of the Density of States (DOS) diagrams indicates that vanadium and cobalt introduce peaks in the conduction band and near the Fermi level in the valence band , respectively, leading to enhanced electrical conductivity . The electronic structural analysis showed a reduction in the band gap of LMO from 1.6 eV to 0.8 eV in the co-doped LCVMO. To validate the DFT results, the electrochemical properties of LCVMO were examined, revealing that the capacitive current contributed 33.9 % in the LMO sample and 29.6 % in the LCVMO sample, corresponding to a 4 % decrease in the scan rate at 1 mV/s, which further supports the increased electrical conductivity . Electrochemical impedance spectroscopy (EIS) was conducted on both electrodes to evaluate the lithium-ion diffusion characteristics. The co-doped materials exhibited higher lithium-ion diffusion rates, with values of 2.69 × 10⁻ 12 cm 2 /s for the LMO sample and 3.42 × 10⁻ 12 cm 2 /s for the LCVMO sample.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. A framework for quantifying uncertainty in DFT energy corrections
2. An overview of the density functional theory on antioxidant bioactivity predictive feasibilities: insights from natural antioxidant products
3. Basics of density functional theory, molecular dynamics, and Monte Carlo simulation techniques in materials science
4. Simultaneous measurement of trace dimethyl methyl phosphate and temperature using all fiber Michaelson interferometer cascaded FBG10.1364/OE.482382 ↗
5. Design and construction of the near-earth space plasma simulation system of the Space Plasma Environment Research Facility10.1017/S0022377823001460 ↗
6. Tailoring the optoelectronic, thermoelectric, and thermodynamic properties of rare-earth quaternary chalcogenides: an inclusive first-principles study
7. Efficient reverse osmosis-based desalination using functionalized graphene oxide nanopores10.1016/j.apsusc.2024.160937 ↗
8. A comprehensive review of fluorescence correlation spectroscopy
9. Jahn–Teller distortion and electronic structure of LiMn2O410.1016/j.jallcom.2008.06.123 ↗
10. Hybrid density functional theory benchmark study on lithium manganese oxides10.1103/PhysRevB.101.205113 ↗
11. The basic physical properties of Li2MnO3 and LiMn2O4 cathode materials10.1016/j.commatsci.2023.112426 ↗
12. Expeditious and eco-friendly synthesis of spinel LiMn2O4 and its potential for fabrication of supercapacitors10.1016/j.jallcom.2020.155060 ↗
13. Preparation of a spinel LiMn2O4 single crystal film from a MnO wafer10.1016/j.jpowsour.2012.12.096 ↗
14. The usefulness of a LiMn2O4 composite as an active cathode material in lithium batteries10.1016/j.jpowsour.2004.03.057 ↗
15. Hydrothermal realization of high‐power nanocomposite cathodes for lithium ion batteries10.1002/aenm.201100481 ↗
16. Influence of the particle size of electrode materials on intercalation rate and capacity of new electrodes10.1016/S0378-7753(99)00232-3 ↗
17. Synthesis of spinel LiMn2O4 cathode material from manganese sulfate fertilizer for Li-ion batteries10.1063/5.0072902 ↗
18. Operando X-ray diffraction analysis of the degradation mechanisms of a spinel LiMn2O4 cathode in different voltage windows10.1016/j.jechem.2019.09.011 ↗
19. Understanding the surface structure of LiMn2O4 spinel cathodes with aberration-corrected HAADF STEM and EELS10.1017/S1431927615007667 ↗
20. Hollow porous LiMn2O4 microcubes as rechargeable lithium battery cathode with high electrochemical performance10.1002/smll.201101838 ↗
21. Pressure effect on the structural, electronic, and magnetic properties of the battery cathode material LiMn2O4: an ab-initio study10.1016/j.jpcs.2022.111198 ↗
22. Understanding the electronic and ionic conduction and lithium over-stoichiometry in LiMn2O4 spinel10.1039/C4TA04116J ↗
23. Malatji · 2019
24. LiMn2O4–MXene nanocomposite cathode for high-performance lithium-ion batteries10.1016/j.egyr.2024.02.006 ↗
25. Constructing nano spinel phase and Li+ conductive network to enhance the electrochemical stability of ultrahigh-Ni cathode10.1016/j.mattod.2024.08.002 ↗
26. Jahn–Teller transition in Al3+ doped LiMn2O4 spinel10.1016/S0038-1098(03)00129-7 ↗
27. Reduced lattice constant in Al‐doped LiMn2O4 nanoparticles for boosted electrochemical lithium extraction10.1002/adma.202310657 ↗
28. Cobalt doped spinel LiMn2O4 cathode toward high-rate performance lithium-ion batteries10.1016/j.vacuum.2023.112724 ↗
29. Effect of Co doping in LiMn2O410.1016/S0378-7753(01)00765-0 ↗
30. Spinel Ni-doped LiMn2O4 cathode material with high oxygen reduction catalytic performance for low temperature solid ceramic fuel cells10.1016/j.ceramint.2023.11.259 ↗
31. D. Hlungwani, P. Ngoepe, and R. Ledwaba, “Derivation of Empirical Interatomic Potentials for Doping Co and Ni into LiMn2O4 Spinel”.
32. First-principles study on the electronic structure and catalytic properties of two-dimensional MX2N4 systems (M= Ti, Zr; X= Si, Ge)10.1016/j.rinp.2023.106820 ↗
33. Density-functional theory of the electronic structure of molecules10.1146/annurev.pc.46.100195.003413 ↗
34. Density functional theory study on the electronic structure and optical properties of Li absorbed borophene10.1080/00268976.2021.1966114 ↗
35. Structural and electronic properties of Cu2+ doped LiMn2O4 cathode material for rechargeable lithium ion battery: a DFT study10.47514/phyaccess.2023.3.1.002 ↗
36. Effects of natural leaching on electronic properties of common lithium manganese oxide LiMn2O410.1016/j.jmmm.2023.171610 ↗
37. Physical properties of the cubic spinel LiMn2O410.1016/j.jpcs.2013.12.005 ↗
38. Singleton · 2001 · vol. 2
39. Oxide coating role on the bulk structural stability of active LiMn2O4 cathodes10.1021/acs.jpcc.3c00342 ↗
40. Boosting the cycling performance of spinel LiMn2O4 by in situ MnBO3 coating10.1016/j.elecom.2022.107266 ↗
41. Enhanced LiMn2O4 thin-film electrode stability in ionic liquid electrolyte: a pathway to suppress Mn dissolution10.1021/acsami.3c04961 ↗
42. Strengthening reversibility at high rate of spinel LiMn2O4 by aluminum and copper Co-doping for lithium ion battery10.1016/j.electacta.2023.142898 ↗
43. Excellent stability of spinel LiMn2O4-based composites for lithium ion batteries10.1039/c2jm34717b ↗
44. Engineering dp orbital hybridization for high-stable lithium manganate cathode
45. High electrochemical stability Al-doped spinel LiMn2O4 cathode material for Li-ion batteries10.1016/j.est.2019.101036 ↗
46. Electrochemical and electronic charge transport properties of Ni-doped LiMn2O4 spinel obtained from polyol-mediated synthesis10.3390/ma11050806 ↗
47. Enhanced cycling performance of LiMn2O4 electrode including cobalt and vanadium codoping for lithium extraction from brine10.1021/acs.energyfuels.4c03409 ↗
48. Synergistic effects of noble metal doping and nanoengineering on boosting the azo dye mineralization activity of nickel oxide10.1016/j.ceramint.2023.09.133 ↗
49. Gadolinium doped zinc ferrite nanoarchitecture reinforced with a carbonaceous matrix: a novel hybrid material for next-generation flexible capacitors10.1039/D3RA05290G ↗
50. Katz · 2007 · vol. 1
51. Synthesis of In2O3/GNPs nanocomposites with integrated approaches to tune overall performance of electrochemical devices10.1016/j.ceramint.2021.03.205 ↗
52. New approaches to measuring biochar density and porosity10.1016/j.biombioe.2014.03.059 ↗
53. Synthesis of doped metal sulfide nanoparticles and their graphene reinforced nanohybrid for Pb (II) detection10.1515/zpch-2023-0252 ↗
54. Boosting the electrochemical activities of MnO2 for next-generation supercapacitor application: adaptation of multiple approaches10.1016/j.fuel.2023.127946 ↗
55. Rationally designed multifunctional Ti3C2 MXene@ Graphene composite aerogel integrated with bimetallic selenides for enhanced supercapacitor performance and overall water splitting10.1016/j.electacta.2022.141103 ↗
56. Fabrication of rationally designed CNTs supported binary nanohybrid with multiple approaches to boost electrochemical performance10.1016/j.jelechem.2021.115070 ↗
57. Towards establishing standard performance metrics for batteries, supercapacitors and beyond10.1039/C8CS00581H ↗
58. Electrochemical impedance spectroscopy study of the LixMn2O4 interface with natural brine10.1016/j.jelechem.2017.11.071 ↗
59. Synthesis of carbon supported iron oxide nanochips and their composite with glutathione: a novel electrochemical sensitive material
60. Assembly of MnCO3 nanoplatelets synthesized at low temperature on graphene to achieve anode materials with high rate performance for lithium-ion batteries10.1016/j.electacta.2016.08.085 ↗