Examination of the electropolishing behaviour of 73 brass in a 70% H3PO4 solution using a rotating disc electrode
Source abstract
Abstract
Abstract The electropolishing behaviour of 73 brass in a 70% H3PO4 solution was studied using a rotating disc electrode (RDE). Based on the results of an anodic polarisation test, a transition peak from kinetic-controlled to diffusion-controlled dissolution was detected when a blue Cu2+-rich layer was developed on the RDE. The blue Cu2+-rich layer impedes the anodic dissolution rate of the brass-RDE and is essential for levelling during electropolishing. Potentiostatic polishing at different locations on the limiting-current plateau was studied. By polishing at the transition-peak potential, grain boundaries were preferentially etched. In contrast, a well-polished surface with a nanosized surface roughness (Ra) was achieved after electropolishing in the middle of the limiting-current plateau. By polishing at the end of the limiting-current plateau at a relatively low rotational speed, nipple-like and flow-streak features were observed. The formation of these features is attributed to the evolution of oxygen bubbles on the RDE surface. Mechanisms for the formation of the above-mentioned features were proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Anodic Oxide Films and Nanostructures · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Performance evaluation of a radiator in a diesel engine – a case study10.1016/S1359-4311(98)00064-7 ↗
2. The influence of bore profile on slurred transients in brass instruments
3. Effect of alloying elements on corrosion resistance of brass and function mechanisms
4. Polishing of copper alloy using double disk ultrasonic assisted magnetic abrasive polishing10.1080/10426914.2012.746704 ↗
5. The nature of mechanically polished surfaces of copper10.1016/0026-0800(81)90001-X ↗
6. Planarization of copper thin films by electropolishing in phosphoric acid for ULSI applications10.1149/1.1523415 ↗
7. Electropolishing of brass alloys in phosphoric acid10.1016/0376-4583(80)90093-X ↗
8. Electropolishing of tantalum in sulfuric acid–methanol electrolytes10.1016/S0013-4686(99)00056-0 ↗
9. Electropolishing of AISI-304 stainless steel using an oxidizing solution originally used for electrochemical coloration10.1016/j.electacta.2004.11.007 ↗
10. Electrochemical micromachining polishing and surface structuring of metals: fundamental aspects and new developments10.1016/S0013-4686(03)00368-2 ↗
11. The anodic dissolution of copper into phosphoric acid10.1149/1.2113686 ↗
12. On the role of mass transport in the high rate dissolution of iron and nickel in ECM electrolytes-I chloride solutions10.1016/0013-4686(80)87130-1 ↗
13. On the role of mass transport in the high rate dissolution of iron and nickel in ECM electrolytes-II chlorate and nitrate solutions10.1016/0013-4686(80)87131-3 ↗
14. Electro-dissolution of 30Nb–Ti alloys in methanolic sulfuric acid – optimal conditions for electropolishing10.1016/j.electacta.2011.05.049 ↗
15. Study of anodic layers and their effects on electropolishing of bulk and electroplated films of copper10.1023/B:JACH.0000015621.31360.14 ↗
16. Mass transport effects during electropolishing of iron in phosphoric-sulphuric acids10.1016/0013-4686(92)87086-F ↗
17. Electropolishing of copper and copper-based alloys in ortho-phosphoric acid10.1016/S0010-938X(72)90826-8 ↗
18. Study on metal anodic dissolution
19. Mechanistic studies of Cu electropolishing in phosphoric acid electrolytes10.1149/1.1740783 ↗
20. Comparison between potentiodynamic and potentiostatic tests for pitting potential measurement of duplex stainless steels10.5006/1.3284005 ↗
21. Residual flaws due to formation of oxygen bubbles in anodic alumina10.1016/S0010-938X(99)00035-9 ↗
22. The investigation of surface morphology forming mechanisms in electropolishing process10.1016/S1452-3981(23)16561-8 ↗
23. The influence of a surface active agent on the electropolishing of copper10.1149/1.2430127 ↗
24. The mechanism of electropolishing of copper in phosphoric acid solutions: I. Processes preceding the establishment of polishing conditions10.1149/1.2781122 ↗
25. The mechanism of electropolishing of copper in phosphoric acid solutions: II. The mechanism of smoothing10.1149/1.2781129 ↗
26. Copper electropolishing in concentrated phosphoric acid: I. Experimental findings10.1149/1.2050074 ↗