journal article·2024-05-28Open access

Dry Printing Pure Copper with High Conductivity and Adhesion for Flexible Electronics

Zabihollah Ahmadi, Aarsh Patel, Curtis Hill, Steven R. Peeples, Jennifer M. Jones, Matthew G. Boebinger, Masoud Mahjouri-Samani

Abstract

Additive manufacturing of functional devices on various rigid and flexible substrates is rising rapidly due to their design flexibility, rapid manufacturing, and lower cost. Current printing technologies are ink-based and focused on printing silver (Ag) as conductive lines due to its matured ink formulation process, low sintering temperature, ease of printing, and low oxidation rate. However, Ag is the 68th most abundant element on Earth, while copper (Cu) is the 25th, making it much cheaper (>100×) while having a comparable conductivity to Ag. Therefore, printing Cu has become technologically and economically more attractive than Ag. Nevertheless, Cu printing is still a significant challenge in ink-based printing methods due to the higher sintering temperature relative to the glass-transition temperature of most flexible substrates, the higher oxidation rate, the challenging ink formulation process, and ink stability concerns. Here, we demonstrate printing highly conductive Cu on flexible polyimide substrates using a dry printing technique. Cu nanoparticles (∼3–30 nm) are generated by on-demand laser ablation of a solid Cu target inside the printer head and under argon background gas. These Cu nanoparticles are then transported through a nozzle and onto the substrate, where they are laser-sintered in real time. The argon gas plays three critical roles in laser plume condensation for nanoparticle generation, transport, and sheath gas to avoid oxidation during sintering. The sintered nanoparticles thus show high electrical conductivity and mechanical stability under static and cyclic tests. Our dry printing technique can potentially revolutionize how electronic devices and sensors are additively manufactured for earth and space applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Electrical and Computer Engineering Department, Auburn University, Auburn, Alabama 36849, United States

Jacobs Space Exploration Group, NASA Marshall Space Flight Center, Huntsville, Alabama 35812, United States

NASA Marshall Space Flight Center, Huntsville, Alabama 35812, United States

Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States

Funding

National Aeronautics and Space Administration

References (47)

Show source-provided references
1. 10.1021/acsnano.1c0220910.1021/acsnano.1c02209 ↗
2. 10.3390/s14071195710.3390/s140711957 ↗
3. 10.1002/adem.20160087810.1002/adem.201600878 ↗
4. 10.1109/ACCESS.2021.311921910.1109/ACCESS.2021.3119219 ↗
5. 10.3390/ma1303070410.3390/ma13030704 ↗
6. 10.1016/j.mtcomm.2022.10326310.1016/j.mtcomm.2022.103263 ↗
7. 10.1007/s00170-019-03438-210.1007/s00170-019-03438-2 ↗
8. 10.1109/TIM.2022.316169510.1109/TIM.2022.3161695 ↗
9. 10.1039/D2NR03990G10.1039/D2NR03990G ↗
10. 10.1038/s41598-019-55640-710.1038/s41598-019-55640-7 ↗
11. 10.1039/C7TC00038C10.1039/C7TC00038C ↗
12. 10.1016/j.matpr.2022.01.46910.1016/j.matpr.2022.01.469 ↗
13. 10.1002/inf2.1229510.1002/inf2.12295 ↗
14. 10.1002/cey2.19910.1002/cey2.199 ↗
15. 10.1016/j.sna.2022.11382110.1016/j.sna.2022.113821 ↗
16. 10.1038/s41467-022-33133-y10.1038/s41467-022-33133-y ↗
17. 10.1088/2058-8585/ac6c6410.1088/2058-8585/ac6c64 ↗
18. 10.3390/electronics1105071610.3390/electronics11050716 ↗
19. 10.1088/2058-8585/ac5bd110.1088/2058-8585/ac5bd1 ↗
20. 10.1007/s11664-022-09579-710.1007/s11664-022-09579-7 ↗
21. 10.3390/ma1503095710.3390/ma15030957 ↗
22. 10.1007/BF0321498510.1007/BF03214985 ↗
23. 10.1021/am201609w10.1021/am201609w ↗
24. 10.1016/j.apmt.2021.10125310.1016/j.apmt.2021.101253 ↗
25. 10.1002/admi.20210256910.1002/admi.202102569 ↗
26. 10.1002/smll.20130300010.1002/smll.201303000 ↗
27. 10.1021/acsanm.0c0024210.1021/acsanm.0c00242 ↗
28. 10.1016/j.apsusc.2020.14860910.1016/j.apsusc.2020.148609 ↗
29. 10.1021/acs.chemrev.5b0048210.1021/acs.chemrev.5b00482 ↗
30. 10.1016/j.cap.2009.03.00810.1016/j.cap.2009.03.008 ↗
31. 10.1021/acsami.5b0306110.1021/acsami.5b03061 ↗
32. 10.1021/acs.chemmater.6b0170910.1021/acs.chemmater.6b01709 ↗
33. 10.3390/nano1009168910.3390/nano10091689 ↗
34. 10.1016/j.jallcom.2017.10.19310.1016/j.jallcom.2017.10.193 ↗
35. 10.1016/j.tsf.2006.11.14210.1016/j.tsf.2006.11.142 ↗
36. 10.1002/adfm.20070090210.1002/adfm.200700902 ↗
37. 10.1007/s00396-013-3123-610.1007/s00396-013-3123-6 ↗
38. 10.1002/admt.20200126010.1002/admt.202001260 ↗
39. Ahmadi Z. · Laser 3D Manufacturing VIII · 2021 · 116770U
40. Ahmadi, Z.; Lee, S.; Unocic, R. R.; Shamsaei, N.; Mahjouri-Samani, M.; Kabashin, A. V.; Farsari, M.; Mahjouri-Samani, M. Laser-based additive nanomanufacturing of functional hybrid materials, structures, and devices. In Nanoscale and Quantum Materials: From Synthesis and Laser Processing to Applications 2022; SPIE, 2022, PC119900A.10.1117/12.2609031 ↗
41. 10.3390/app1219961610.3390/app12199616 ↗
42. 10.1364/OE.26.02553410.1364/OE.26.025534 ↗
43. 10.1016/j.tsf.2018.04.03410.1016/j.tsf.2018.04.034 ↗
44. Lall, P.; Soni, V.; Hill, C. Process Development for Printing Copper Conductible Ink on Flexible Substrates using Aerosol Jet Printing Technology. In 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm); IEEE, 2021; pp 1073–1084.10.1109/ITherm51669.2021.9503246 ↗
45. 10.1021/acsaelm.2c0115010.1021/acsaelm.2c01150 ↗
46. 10.1021/acsami.8b1716410.1021/acsami.8b17164 ↗
47. 10.1007/s10853-015-9643-310.1007/s10853-015-9643-3 ↗