Improving the photovoltaic parameters in Quantum dot sensitized solar cells through employment of chemically deposited compact titania blocking layer
Source abstract
Abstract
Abstract Incorporation of compact blocking layer at the Transparent Conducting Oxide (TCO)/Electrolyte interface is an effective method to improve the device performance in QDSSC through mitigation of electron recombinations at this interface. This paper reports the most facile and cost effective method of depositing a rutile titania Compact Layer (CL) over Fluorine doped Tin Oxide (FTO) substrate and its application in titania based CdS QD sensitized solar cells. The deposited compact layers are characterized to study their structural, optical, morphological and electrochemical properties using X-Ray Diffractometry, UV–Visible spectroscopy, Scanning electron microscopy, Cyclic Voltammetry and Contact Angle measurements. Sandwich solar cells are fabricated using these CL based electrodes and characterized using Electrochemical Impedance Spectroscopy, Open Circuit Voltage Decay and J-V characteristics. The CL incorporated CdS QDSSC showed more than 100% increase in the photoconversion efficiency (1.68%) as compared to its bare FTO counterpart (0.73%) proving the efficacy of employed strategy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Mn doped quantum dot sensitized solar cells with power conversion efficiency exceeding 9%10.1039/C5TA09306F ↗
2. Solar conversion efficiency of photovoltaic and photoelectrolysis cells with carrier multiplication absorbers10.1063/1.2356795 ↗
3. High-efficiency “green” quantum dot solar cells10.1021/ja504310w ↗
4. How does back-reaction at the conducting glass substrate influence the dynamic photovoltage response of nanocrystalline dye-sensitized solar cells?10.1021/jp0407270 ↗
5. Blocking layer effect on dye-sensitized solar cells assembled with TiO2 nanorods prepared by DC reactive magnetron sputtering10.1166/nnl.2011.1143 ↗
6. Uncovering the role of the ZnS treatment in the performance of quantum dot sensitized solar cells
7. Enhanced efficiency of a dye-sensitized solar cell made from MgO-coated nanocrystalline SnO2
8. Determining the locus for photocarrier recombination in dye-sensitized solar cells10.1063/1.1436533 ↗
9. Nb-doped TiO2: a new compact layer material for TiO2 dye-sensitized solar cells10.1021/jp9002017 ↗
10. An efficient and low-cost TiO 2 compact layer for performance improvement of dye-sensitized solar cells10.1016/j.electacta.2008.09.025 ↗
11. Carrier leakage blocking effect of high temperature sputtered TiO2 film on dye-sensitized mesoporous photoelectrode10.1016/j.tsf.2007.03.079 ↗
12. The effect of sputter-deposited TiO 2 passivating layer on the performance of dye-sensitized solar cells based on sol–gel derived photoelectrode10.1016/j.tsf.2008.06.027 ↗
13. Implication of device functioning due to back reaction of electrons via the conducting glass substrate in dye sensitized solar cells10.1063/1.2149215 ↗
14. The effect of a blocking layer on the photovoltaic performance in CdS quantum-dot-sensitized solar cells10.1016/j.jpowsour.2011.08.052 ↗
15. Performance improvement of CdS quantum dots sensitized TiO2 solar cells by introducing a dense TiO2 blocking layer10.1088/0022-3727/41/10/102002 ↗
16. The effect of TiO2 compact layer in ZnO nanorod based CdS/CdSe quantum-dot sensitized solar cell10.1002/pssa.201330476 ↗
17. Fabrication, characterization, and optimization of CdS and CdSe quantum dot-sensitized solar cells with quantum dots prepared by successive ionic layer adsorption and reaction10.1155/2014/939423 ↗
18. Importance of recombination at the TCO/electrolyte interface for high efficiency quantum dot sensitized solar cells10.1021/jp306782q ↗
19. Fabrication and characterization of thin Nb2 O 5 blocking layers for ionic liquid-based dye-sensitized solar cells
20. The effect of Al2O3 barrier layers in TiO2/Dye/CuSCN photovoltaic cells explored by recombination and DOS characterization using transient photovoltage measurements10.1021/jp0468049 ↗
21. Deposition of a thin film of TiO x from a titanium metal target as novel blocking layers at conducting glass/TiO2 interfaces in ionic liquid mesoscopic TiO2 dye-sensitized solar cells10.1021/jp064327j ↗
22. Room temperature synthesis of rutile titania nanoparticles: a thermodynamic perspective10.1140/epjd/e2013-40268-1 ↗
23. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
24. Chemical bath deposition of CdS quantum dots onto mesoscopic TiO2 films for application in quantum-dot-sensitized solar cells10.1063/1.2768311 ↗
25. Modeling of an equivalent circuit for dye- sensitized solar cells: improvement of efficiency of dye-sensitized solar cells by reducing internal resistance10.1016/j.crci.2005.02.046 ↗
26. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
27. determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements10.1002/cphc.200200615 ↗
28. Significance of compact layers on DSSCs performance of chemically deposited TiO2-based Dye-sensitized solar cells
29. The effect of TiCl 4-treated TiO 2 compact layer on the performance of dye-sensitized solar cell10.1016/j.cap.2011.10.011 ↗
30. Effect of titanium oxide compact layer in dye-sensitized solar cell prepared by liquid-phase deposition10.1007/s00339-016-0492-y ↗
31. Evaluation of TiO2 and N-TiO2 blocking layer to improve the efficiency in dye-sensitized solar cells