Production of hydrogen, active zerovalent iron and ferroferric oxide octahedron by alkaline etching Al–Fe alloys
Source abstract
Abstract
Abstract Hydrogen is becoming important clean energy while zerovalent iron (ZVI) and ferroferric oxide are of great interest to many applications including environmental remediation and chemical catalysis. Here, we report production of hydrogen, zerovalent iron and ferroferric oxide octahedron by etching Al–Fe alloys using NaOH solutions. The rate of hydrogen generation increased with increasing NaOH concentration and the alloy's particle size and decreasing the alloy's Fe concentration. Alkaline etching Al–Fe alloy particles of 425–850 μm produced 19–53 μm ZVI particles, which had paralleled ravines of 0.2–0.3 μm wide on the surface and possessed specific surface areas of 30–70 m2/g. The microscale ZVI was highly active for the removal of a model pollutant acid orange 7 from water. After 3–6 h ageing in the alkaline etching solution, the microscale ZVI particles were transformed to octahedral ferroferric oxide with saturation magnetization of 68.2 emu/g and residual magnetization of 13.2 emu/g and a coercive force of 330 Oe. This study provides a new approach for a facile synthesis of highly active ZVI and octahedral ferroferric oxide along with on-board generation of hydrogen from Al–Fe alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Environmental remediation with nanomaterials · Nanomaterials for catalytic reactions · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. 2018
2. Balk · Book Reviews, Death Studies · 2005 · 29 · 17910.1080/07481180590906200 ↗
3. Chemical removal of nitrate from water by aluminum-iron alloys10.1016/j.chemosphere.2016.09.102 ↗
4. The challenge of hydrogen production for the transition to a CO2-free economy
5. Fueling U.S. Transportation: the hydrogen economy and its alternatives, environment10.3200/ENVT.49.8.10-25 ↗
6. Hydrogen generation with acid/alkaline amphoteric water electrolysis10.1016/j.jechem.2018.12.022 ↗
7. Water electrolysis based on renewable energy for hydrogen production10.1016/S1872-2067(17)62949-8 ↗
8. Hydrogen production using solar energy - technical analysis10.1016/j.egypro.2017.03.1097 ↗
9. Hydrogen and syngas production by catalytic biomass gasification10.1016/j.enconman.2016.12.056 ↗
10. Hydrogen production, storage, transportation and key challenges with applications: a review10.1016/j.enconman.2018.03.088 ↗
11. Plasma chain catalytic reforming of methanol for on-board hydrogen production10.1016/j.cej.2019.03.069 ↗
12. An efficient on-board metal-free nanocatalyst for controlled room temperature hydrogen production10.1039/C7SC00162B ↗
13. Hydrogen-storage materials for mobile applications10.1038/35104634 ↗
14. On-board hydrogen production for auxiliary power in passenger aircraft10.1016/j.ijhydene.2017.02.037 ↗
15. Experiment assessment of hydrogen production from activated aluminum alloys in portable generator for fuel cell applications10.1016/j.energy.2010.03.023 ↗
16. 99/03911 Aluminum production using high-temperature solar process heat
17. Design of Al–Fe alloys for fast on-board hydrogen production from hydrolysis10.1039/c1jm11329a ↗
18. A review on hydrogen production using aluminum and aluminum alloys10.1016/j.rser.2008.02.009 ↗
19. Hydrogen generation using a ball-milled Al/Ni/NaCl mixture10.1016/j.jallcom.2013.11.058 ↗
20. Experimental and theoretical study of aluminium corrosion in NaOH, NaCl and HCl solutions10.1108/ACMM-04-2017-1785 ↗
21. Reaction of aluminium with alkaline sodium stannate solution as a controlled source of hydrogen10.1039/c1ee00014d ↗
22. The superior hydrogen-generation performance of multi-component Al alloys by the hydrolysis reaction10.1016/j.ijhydene.2018.12.124 ↗
23. Hydrogen production by the reaction of Al-based metals with water vapor
24. Hydrogen generation by splitting water with Al–Ca alloy10.1016/j.energy.2011.02.018 ↗
25. On-board hydrogen production by hydrolysis from designed Al–Cu alloys and the application of this technology to polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2012.06.008 ↗
26. Feasibility of on-board hydrogen production from hydrolysis of Al–Fe alloy for PEMFCs10.1016/j.ijhydene.2011.06.099 ↗
27. Degradation of Acid Orange 7 by peroxymonosulfate activated with the recyclable nanocomposites of g-C3N4 modified magnetic carbon10.1016/j.chemosphere.2018.04.139 ↗
28. Automatic microbial electro-Fenton system driven by transpiration for degradation of acid orange 710.1016/j.scitotenv.2020.138508 ↗
29. Metal–organic framework technologies for water remediation: towards a sustainable ecosystem10.1039/C8TA00264A ↗
30. Nano zero valent iron composites for water decontamination: a review10.2174/2212717805666180405123523 ↗
31. Review on nano zerovalent iron (nZVI): from synthesis to environmental applications10.1016/j.cej.2015.11.046 ↗
32. An overview of preparation and applications of stabilized zero-valent iron nanoparticles for soil and groundwater remediation10.1016/j.watres.2016.05.019 ↗
33. Iron nanoparticles for environmental clean-up: recent developments and future outlook10.1039/C2EM30691C ↗
34. Performance and toxicity assessment of nanoscale zero valent iron particles in the remediation of contaminated soil: a review10.1016/j.chemosphere.2018.07.118 ↗
35. Nanoscale zerovalent iron particles for groundwater remediation: a review10.1016/j.jclepro.2013.12.026 ↗
36. The influences of iron characteristics, operating conditions and solution chemistry on contaminants removal by zero-valent iron: a review10.1016/j.watres.2016.05.031 ↗
37. Liquid metals dealloying as a general approach for the selective extraction of metals and the fabrication of nanoporous metals: a review10.1016/j.mtcomm.2020.102007 ↗
38. Preparation of hierarchical porous metals by two-step liquid metal dealloying10.1016/j.scriptamat.2017.08.038 ↗
39. Microstructure and phase evolution during the dealloying of bi-phase Al–Ag alloy10.1016/j.corsci.2012.11.027 ↗
40. A general dealloying strategy to nanoporous intermetallics, nanoporous metals with bimodal, and unimodal pore size distributions10.1016/j.corsci.2012.01.023 ↗
41. Evolution of nanoporosity in dealloying10.1038/35068529 ↗
42. A general corrosion route to nanostructured metal oxides10.1039/b9nr00351g ↗
43. Regular Fe3O4 octahedrons with excellent soft magnetic properties prepared by dealloying technique10.1016/j.jallcom.2013.10.017 ↗
44. Paving the way to Fe3O4 nano- and microoctahedra by dealloying Al-Fe binary alloys10.1016/j.matchar.2019.109869 ↗
45. Characterization of zero-valent iron nanoparticles10.1016/j.cis.2006.03.001 ↗
46. Hydrogen generation by hydrolysis of Al–Li–Bi–NaCl mixture with pure water10.1016/j.ijhydene.2011.03.029 ↗
47. Hydrogen production by hydrolysis of aluminum10.1016/j.jallcom.2013.06.016 ↗
48. Effect of ball milling in presence of additives (Graphite, AlCl3, MgCl2 and NaCl) on the hydrolysis performances of Mg17Al1210.1016/j.ijhydene.2019.12.162 ↗
49. Design of ternary Al–Sn–Fe alloy for fast on-board hydrogen production, and its application to PEM fuel cell10.1016/j.ijhydene.2011.06.072 ↗
50. Effects of amalgam on hydrogen generation by hydrolysis of aluminum with water10.1016/j.ijhydene.2011.08.073 ↗
51. Facile fabrication and growth mechanism of 3D flower- like Fe3O4 nanostructures and their application as SERS substrates10.1039/c2ce25198a ↗
52. High quality self-assembly magnetite (Fe3O4) chain-like core-shell nanowires with luminescence synthesized by a facile one-pot hydrothermal process10.1039/c002199g ↗
53. Synthesizing nanoscale iron particles for rapid and complete dechlorination of TCE and PCBs10.1021/es970039c ↗
54. Anchoring nZVI on metal-organic framework for removal of uranium(Ⅵ) from aqueous solution10.1016/j.jssc.2018.09.013 ↗
55. Optimizing synthesis conditions of nanoscale zero-valent iron (nZVI) through aqueous reactivity assessment10.1007/s11783-015-0784-z ↗
56. Nanoscale zero-valent iron supported on biochar: characterization and reactivity for degradation of acid orange 7 from aqueous solution
57. Synthesis of reactive nanoscale zero valent iron using rectorite supports and its application for Orange II removal10.1016/j.cej.2012.10.088 ↗
58. Synthesis, characterization, and reactivity of cellulose modified nano zero-valent iron for dye discoloration10.1016/j.apsusc.2015.03.131 ↗