TEM study on the microstructure of the interface at the scale of nanometer formed between Cu-8 wt.% Ti melt and C/C preform
Source abstract
Abstract
Abstract Carbon/copper composites have been widely used in a variety of fields, for example electrical contact devices by taking advantages of both carbon and Cu simultaneously. However, the interfacial reaction and microstructure of these composites are not well known yet in the nanometer scale, especially involving the interaction between active alloy melt and carbon, which remains an important question in composites technology. In this study, we employ transmission electron microscopy (TEM) to investigate the interfacial microstructures, which are formed in the course of infiltration of carbon/carbon (C/C) composites preform by molten Cu-8 wt.% Ti at 1373 K. The results show that in the short-cut fiber web zone, there are two types of interfaces: (i) the mixture of fine-grained (FG) TiC and nano-sized Cu particles and (ii) a “Cu layer” with a thickness of no more than 500 nm at the pyrolytic carbon (PyC)/coarse-grained (CG) TiC interface. The main bonding mechanisms for the two interfaces are the formation of PyC/TiC and PyC/Cu2O interfaces, and the PyC/Cu2O interface, respectively. In the non-woven cloth zone, only Cu2O layer is found between Cu and PyC without any TiC layer due to the depletion of Ti.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Capillary interactions between molten silicon and porous graphite10.1007/s10853-009-3889-6 ↗
2. Initial stages of silicon-crucible interactions in crystallisation of solar grade silicon: kinetics of coating infiltration10.1016/j.actamat.2014.04.072 ↗
3. Wetting and reactivity in Ni-Si/C system: experiments versus model predictions10.1007/s10853-006-1483-8 ↗
4. The role of the chemical reaction in the infiltration of porous carbon by NiSi alloys10.1016/j.scriptamat.2006.02.015 ↗
5. Reactivity between liquid Si or Si alloys and graphite10.1016/j.jeurceramsoc.2012.05.020 ↗
6. Reactive infiltration of porous graphite by NiSi alloys10.1016/j.actamat.2008.01.011 ↗
7. Characterization of brazed joints of C-C composite to Cu-clad-Molybdenum10.1016/j.compscitech.2008.06.012 ↗
8. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys10.1016/j.carbon.2017.06.030 ↗
9. Surface modification of carbon/carbon composites to improve their wettability by copper10.1016/j.carbon.2012.01.049 ↗
10. The wetting of carbon by copper and copper alloys10.1007/BF00554633 ↗
11. Wetting behavior and interfacial microstructure of palladium- and silver-based braze alloys with C-C and SiC-SiC composites10.1007/s10853-010-4647-5 ↗
12. Reaction layer formation at the graphite/copper-chromium alloy interface
13. The role of reactivity in wetting by liquid metals: a review10.1007/s10853-015-9331-3 ↗
14. Progress in understanding and modeling reactive wetting of metals on ceramics10.1016/j.cossms.2006.04.004 ↗
15. Diffusion-limited reactive wetting: effect of interfacial reaction behind the advancing triple line10.1007/s10853-007-1915-0 ↗
16. On the interfacial nanostructure of brazed diamond grits10.1016/j.scriptamat.2004.01.024 ↗
17. Influence of brazing parameters and alloy composition on interface morphology of brazed diamond10.1016/j.msea.2007.08.101 ↗
18. New wetting mechanism induced by the effect of Ag on the interaction between resin carbon and AgCuTi brazing alloy10.1016/j.msea.2017.04.054 ↗
19. Active brazing of C/C composite to copper by AgCuTi filler metal10.1007/s11661-016-3340-y ↗
20. Ablation property of a C/C-Cu composite prepared by pressureless infiltration10.1016/j.matlet.2011.04.017 ↗
21. Fabrication of Cf/ZrC composites by infiltrating Cf/C performs with Zr-Cu alloys10.1016/j.matlet.2013.06.111 ↗
22. Effects of copper on microstructure and mechanical properties of Cf/ZrC composites fabricated by low-temperature liquid metal infiltration10.1016/j.ceramint.2013.10.037 ↗
23. Effects of carbon matrix on microstructure and properties of 3-D C/ZrC composites prepared by reactive melt infiltration10.1016/j.ceramint.2013.12.072 ↗
24. Preparation of carbon fiber-reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature10.1016/j.scriptamat.2012.07.044 ↗
25. Improved wetting and thermal properties of graphite-Cu composite by Cr-solution immersion method10.1016/j.diamond.2016.03.024 ↗
26. The wettability and interface thermal resistance of copper/graphite system with an addition of chromium10.1016/j.matchemphys.2011.03.003 ↗
27. Wetting of porous graphite by Cu–Ti alloys at 1373K10.1016/j.matchemphys.2010.07.001 ↗
28. Effect of Cr on the wetting in Cu/graphite system10.1016/j.apsusc.2011.02.060 ↗
29. Effect of matrix-alloying-element chromium on the microstructure and properties of graphite flakes/copper composites fabricated by hot pressing sintering10.1016/j.carbon.2017.11.033 ↗
30. Influence of the interface structure on the thermo-mechanical properties of Cu-X (X=Cr or B)/carbon fiber composites10.1016/j.materresbull.2011.11.004 ↗
31. Relationship between interphase chemistry and mechanical properties at the scale of micron in Cu-Cr/CF composite10.1016/j.actamat.2010.11.006 ↗
32. Mo2C intermediate layers for the wetting and infiltration of graphite foams by liquid copper10.1016/j.carbon.2011.03.038 ↗
33. Effects of titanium addition on the microstructure of carbon/copper composite materials10.1016/j.ssc.2006.10.013 ↗
34. Characterization of interfacial mechanical properties in carbon fiber/aluminium matrix composites by the nanoindentation technique10.1016/j.compscitech.2005.04.013 ↗
35. Fabrication and characterization of 3-D Cf/ZrC composites by low-temperature liquid metal infiltration10.1016/j.compositesb.2013.09.029 ↗
36. TEM study of carbon fibre reinforced aluminium matrix composites: influence of brittle phases and interface on mechanical properties10.1016/S0955-2219(00)00021-2 ↗
37. Carbon fiber knitted fabric reinforced copper composite for sliding contact material10.1016/j.matdes.2010.11.063 ↗
38. Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process10.1016/j.compscitech.2014.03.022 ↗
39. Effect of alloying elements on the interfacial bonding strength and electric conductivity of carbon nano-fiber reinforced Cu matrix composites10.1016/j.msea.2006.02.377 ↗
40. Electron microscopy of copper oxidation10.1080/01418618408233294 ↗
41. TiC growth in C fiber/Ti alloy composites during liquid infiltration10.1016/0956-716X(93)90299-8 ↗
42. Influence of structural state of carbon on formation of mechanocomposites Cu-C10.1016/j.jallcom.2016.03.280 ↗