journal article·2021-07

Luminescence improvement of (Ti,Si)O2:Eu3+/Li+ spherical particles for anti-counterfeiting application

Byeong Ho Min, Kyeong Youl Jung

Publisher page

Abstract

Abstract Eu3+-doped TiO2 as a security material was synthesized by spray pyrolysis. The effect of the SiO2 introduction and Li + co-doping on the crystallographic and optical properties of TiO2:Eu3+ were investigated as changing the calcination temperature. TiO2:Eu3+ has an intense peak at 618 nm due to the electrical dipole transition 5D0 → 7F2 of Eu3+ located in a site without inversion symmetry. The SiO2 introduction suppressed the grain growth of TiO2 and improved the thermal stability of anatase phase. Thus, (Ti,Si)O2:Eu3+ could have a larger band gap while maintaining anatase phase at higher calcination temperature and showed an improved emission of about 38% compared to TiO2:Eu3+. In addition, the co-doping of Li+ with Eu3+ into the (Ti,Si)O2 matrix was found to be an effective way to substantially improve PL intensity due to the charge compensation effect. As a result, (T,Si)O2:Eu3+/Li+ showed about 143% enhanced luminescence intensity compared to TiO2:Eu3+, and was confirmed to have high luminescence under near-ultraviolet light when applied to the logo mark.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Advanced Nanomaterials in Catalysis · Carbon and Quantum Dots Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Color manipulation of Bi3+-activated CaZnOS under stress with ultra-high efficiency and low threshold for anticounterfeiting applications10.1039/C9TC06543A ↗
2. Tunable color emission of transparent boron nitride nanophosphors towards anti-counterfeiting application10.1016/j.jallcom.2019.03.269 ↗
3. Aerosol synthesis of TiO2:Er3+/Yb3+ submicron-sized spherical particles and upconversion optimization for application as anti-counterfeiting materials10.1039/D0RA01549K ↗
4. Versatile fluorescent CaGdAlO4:Eu3+ red phosphor for latent fingerprints detection10.1016/j.jallcom.2020.153994 ↗
5. Future prospects of luminescent nanomaterial based security inks: from synthesis to anti-counterfeiting applications10.1039/C5NR06965C ↗
6. Single excitable dual emissive novel luminescent pigment to generate advanced security features for anti-counterfeiting applications10.1039/C9TC04492B ↗
7. DLVO theory applied to TiO2 pigments and other materials in latex paints10.1016/S0300-9440(01)00261-2 ↗
8. Safety of titanium dioxide nanoparticles in cosmetics10.1111/jdv.15943 ↗
9. Magnetic graphene TiO2-based photocatalyst for the removal of pollutants of emerging concern in water by simulated sunlight aided photocatalytic ozonation10.1016/j.apcatb.2019.118275 ↗
10. Influence of electrolyte composition on ultrafast interfacial electron transfer in Fe-sensitized TiO2-based solar cells10.1021/acs.jpcc.9b09404 ↗
11. Optical absorption intensity analysis using Judd-Ofelt theory and photoluminescence investigation for red-emitting Eu3+: TiO2 nanoparticles10.1016/j.solidstatesciences.2020.106371 ↗
12. Photocatalytic degradation of methylene blue using three-dimensional porous graphene-titania microparticles under UV light10.1007/s11814-020-0512-7 ↗
13. Preparation of SiO2@TiO2:Eu3+@TiO2 core double-shell microspheres for photodegradation of polyacrylamide10.1039/C9RA06187H ↗
14. Synthesis, structure and luminescence properties of TiO2:Eu3+ for white light-emitting diode10.1016/j.jallcom.2013.07.072 ↗
15. Luminescence intensity ratio thermometry and judd-ofelt analysis of TiO2:Eu3+10.1016/j.optmat.2018.08.065 ↗
16. Controllable synthesis and luminescence properties of TiO2:Eu3+ nanorods, nanoparticles and submicrospheres by hydrothermal method10.1016/j.optmat.2014.10.026 ↗
17. Fabrication and photoluminescence properties of TiO2:Eu3+ microspheres with tunable structure from solid to core–shell10.1039/C4CE01048E ↗
18. Enhanced upconversion luminescence of GdVO4:Er3+/Yb3+ prepared by spray pyrolysis using organic additives10.1039/C9RA03941D ↗
19. Advances in nanostructures fabricated via spray pyrolysis and their applications in energy storage and conversion10.1039/C8CS00904J ↗
20. Spray pyrolysis synthesis of mesoporous TiO2 microspheres and their post modification for improved photocatalytic activity10.1007/s11814-018-0176-8 ↗
21. Spray pyrolysis technique; High-K dielectric films and luminescent materials: a review10.3390/mi9080414 ↗
22. Acidic peptizing agent effect on anatase-rutile ratio and photocatalytic performance of TiO2 nanoparticles10.1186/s11671-018-2465-x ↗
23. Quantitative analysis of anatase-rutile mixtures with an X-ray diffractometer10.1021/ac60125a006 ↗
24. Photoluminescence and photocatalysis properties of dual-functional Eu3+-doped anatase nanocrystals10.1021/acs.jpcc.6b11013 ↗
25. Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors10.1021/cm062887p ↗
26. Effect of surface area and crystallite size on luminescent intensity of Y2O3:Eu phosphor prepared by spray pyrolysis10.1016/j.matlet.2005.03.017 ↗
27. Effect of silica coating on the structural and luminescent properties of Sm3+/Yb3+ or Tm3+/Yb3+ co-doped TiO2 nanoparticles10.1016/j.ceramint.2019.10.044 ↗
28. The effect of Li+ incorporation in Yb3+-Nd3+ co-doped CaF2 phosphors over the NIR photoluminescence emission excited under visible light10.1016/j.ceramint.2020.10.037 ↗