Gelation elimination in eco-friendly preparation of double-layered calcium alginate-coconut oil latent heat energy storing microcapsules
Source abstract
Abstract
Latent heat storage by phase change materials (PCMs) has become an important research area due to the need of energy saving especially in the building sector. Environmental considerations require the intensified use of bio-originated materials instead of agents gained from mineral oil. Due to its melting point in the range of room temperature, the coconut oil is an available bio-originated PCM with low cost and high heat capacity. In this study, the main process parameters of coconut oil PCM-loaded calcium alginate microcapsules with double-layered shell were optimised. Viscosity of alginate solution, contact time, concentrations of alginate and calcium ions played important role in the process optimisation and waste reduction. In a thermal cycling test, it was confirmed that the microcapsules did not leak the PCM after 200 heating and cooling cycles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Polymer composites and self-healing · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Phase change material (PCM) storage for free cooling of buildings—a review10.1016/j.rser.2012.10.034 ↗
2. Phase change and aerogel dual functionalized composites materials with double network structure through one-step preparation of polyacrylamide/calcium alginate/polyethylene glycol10.1016/j.polymer.2021.123710 ↗
3. Surface modification of microencapsulated phase change materials with nanostructures for enhancement of their thermal conductivity10.1016/j.matchemphys.2021.125438 ↗
4. Encapsulation of phase change materials with alginate modified by nanostructured sodium carbonate and silicate, Iran
5. Biodegradable polymeric solid framework-based organic phase-change materials for thermal energy storage10.1021/acs.iecr.9b01693 ↗
6. Synthesis and characterization of micro-nanoencapsulated n-eicosane with PMMA shell as novel phase change materials for thermal energy storage10.1016/j.matchemphys.2018.05.044 ↗
7. Waste materials as the potential phase change material substitute in thermal energy storage system: a review10.1080/00986445.2020.1715960 ↗
8. Enhanced thermal conductivity of composite phase change materials based on carbon modified expanded perlite10.1016/j.matchemphys.2021.124226 ↗
9. A facile and controllable method to encapsulate phase change materials with non-toxic and biocompatible chemicals10.1016/j.applthermaleng.2014.06.006 ↗
10. Microencapsulation of phase change materials with polystyrene/cellulose nanocrystal hybrid shell via pickering emulsion polymerization10.1021/acssuschemeng.9b04134 ↗
11. Nano-encapsulated phase change materials prepared by one-step interfacial polymerization for thermal energy storage10.1016/j.matchemphys.2019.04.032 ↗
12. Thermal properties and behavior of microencapsulated sugarcane wax phase change material10.1016/j.heliyon.2019.e02184 ↗
13. In situ preparation and characterization of encapsulated high-chain fatty acid ester-based phase change material (PCM) in poly(urethane-urea) by using amino alcohol10.1016/j.cej.2013.07.026 ↗
14. Facile self-assembly approach to construct a novel MXene-decorated nano-sized phase change material emulsion for thermal energy storage10.1016/j.ceramint.2021.11.008 ↗
15. Thermal energy storage by the encapsulation of phase change materials in building elements—a review10.3390/ma14061420 ↗
16. Preparation, characterisation and thermal properties of calcium alginate/n-nonadecane microcapsules fabricated by electro-coextrusion for thermo-regulating textiles10.3109/02652048.2015.1073388 ↗
17. Preparation of calcium alginate microcapsules containing n-nonadecane by a melt coaxial electrospray method10.1016/j.elstat.2014.10.013 ↗
18. Biomimetic solid–liquid transition structural dye-doped liquid crystal/phase-change-material microcapsules designed for wearable bistable electrochromic fabric10.1021/acsami.1c08135 ↗
19. Time dependent gelling properties of cuboid alginate gels made by external gelation method: effects of alginate-CaCl2 solution ratios and pH10.1016/j.foodhyd.2018.12.022 ↗
20. Consolidated microcapsules with double alginate shell containing paraffin for latent heat storage10.1016/j.solmat.2015.07.029 ↗
21. Fully bio originated latent heat storing calcium alginate microcapsules with high coconut oil loading10.1016/j.solener.2018.05.066 ↗
22. Antimicrobial functionalization of Ca alginate-coconut oil latent heat storing microcapsules by Ag nanoparticles10.1002/er.5848 ↗
23. Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties10.1016/S0142-9612(00)00201-5 ↗
24. Lee · 1998
25. Coconut oil and palm oil's role in nutrition, health and national development: a review10.4314/gmj.v50i3.11 ↗
26. Chemical composition and health benefits of coconut oil: an overview10.1002/jsfa.10870 ↗
27. Thermal degradation and pyrolysis behavior of aluminum alginate investigated by TG-FTIR-MS and Py-GC-MS10.1016/j.polymdegradstab.2015.04.010 ↗
28. Copper(II)-mediated thermolysis of alginates: a model kinetic study on the influence of metal ions in the thermochemical processing of macroalgae10.1098/rsfs.2012.0046 ↗
29. Thermoanalytical studies (TG–DTG–DSC, Py–GC/MS) of sodium carboxymethyl starch with different degrees of substitution10.1007/s10973-019-08892-4 ↗