journal article·2016-07

Response of primary dendrite distribution to deceleration growth conditions in a Sn Ni peritectic alloy

Peng Peng, Xinzhong Li, Yanqing Su, Jingjie Guo

Publisher page

Abstract

Abstract The primary dendrite arm spacing (PDAS) λ1 and its distribution of primary Ni3Sn2 phase has been examined in directionally solidified Sn-36 at.%Ni peritectic alloys during the transient conditions attending deceleration. Dependences of λ1 on both the deceleration rate and solidification time have been investigated through the statistical techniques including minimal spanning tree (MST) and Voronoi polygon. The existence of a range of PDAS is confirmed, and this range Δ is closely related with the deceleration rates. This range also increases with increasing solidification time at a fixed deceleration rate. Both the analyses by MST and Voronoi polygon show that the distribution of λ1 is greatly influenced by decelerating growth condition. The range of λ1, Δ can well reflect the history-dependent growth of primary dendrite arms. In addition, due to the solidification characteristic of Sn Ni peritectic system, λ1 does not response quickly to the variation in growth conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
2. Numerical modeling of cellular/dendritic array growth: spacing and structure predictions10.1007/BF02648950 ↗
3. Spacing characterization in Al-Cu alloys directionally solidified under transient growth conditions10.1016/j.actamat.2010.07.029 ↗
4. P.M. Curran, L.F. Schulmeister, J.S. Erickson, A.F. Giamei, Proceedings of the Conference on in Situ Composites H, p. 285.
5. Elliott · 2005
6. On the origin of the equiaxed zone in castings
7. Some consequences of thermosolutal convection: the grain structure of castings10.1007/BF02648947 ↗
8. Microstructural response to controlled accelerations during the directional solidification of Al-6wt.% Si alloys10.1016/1044-5803(93)90066-5 ↗
9. On secondary dendrite arm coarsening in peritectic solidification10.1016/j.msea.2004.07.032 ↗
10. Nucleation behaviors of the intermetallic compounds at the initial interfacial reaction between the liquid Sn3.0Ag0.5Cu solder and Ni substrate during reflow10.1016/j.intermet.2012.07.035 ↗
11. Optimization of hardening of Al–Zr–Sc cast alloys10.1007/s10853-006-0265-7 ↗
12. A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection10.1016/S1359-6454(03)00110-1 ↗
13. Modeling of primary spacing selection in dendrite arrays during directional solidification10.1007/s11663-002-0007-4 ↗
14. Eutectic growth: selection of interlamellar spacings10.1007/BF02647722 ↗
15. History effects during the selection of primary dendrite spacing10.1016/S0022-0248(01)01932-7 ↗
16. Primary dendrite distribution in directionally solidified Sn-36at.%Ni peritectic alloy10.1557/jmr.2012.383 ↗
17. Minimal spanning tree: a new approach to study order and disorder10.1103/PhysRevB.34.3528 ↗
18. Dendritic array growth in the systems NH4Cl–H2O and [CH2CN]2–H2O: dendrite tip behavior and the origin of side arm evolution10.1016/S0022-0248(01)01681-5 ↗
19. Statistical analysis of the disorder of two-dimensional cellular arrays in directional solidification10.1007/BF02650265 ↗
20. Effect of growth conditions on the structure of directionally solidified γ/γ′-δ eutectic10.1007/BF02652509 ↗
21. Role of dendrite branching and growth kinetics in the formation of low angle boundaries in Ni-base superalloys10.1016/j.msea.2005.09.030 ↗
22. Development of dendrite array growth during alternately changing solidification condition10.1016/j.jcrysgro.2003.08.071 ↗
23. Effect of an abrupt change growth velocity on directionally solidified microstructures of Ni-24.19wt%Nb hypereutectic alloy10.1016/j.msea.2007.04.086 ↗
24. Solidification of peritectic alloys10.1179/imr.1996.41.4.129 ↗
25. Phase selection during solidification of peritectic alloys10.1016/S1359-6454(96)00038-9 ↗
26. Composition-dependent phase substitution in directionally solidified Sn-22at.%Ni peritectic alloy10.1007/s10853-015-9472-4 ↗
27. A new investigation of the system Ni-Sn10.1016/j.intermet.2006.10.045 ↗
28. Schroeder · 2000
29. Cellular array morphology during directional solidification10.1007/s11661-002-0224-0 ↗
30. Cell/Dendrite distribution in directionally solidified hypoeutectic Pb-Sb alloys10.1007/s11661-999-0027-7 ↗
31. Primary dendrite distribution and disorder during directional solidification of Pb-Sb alloys10.1007/s11661-002-0337-5 ↗
32. Primary spacing selection of constrained dendritic growth10.1016/0022-0248(93)90015-O ↗
33. A numerical analysis of dendritic and cellular array growth: the spacing adjustment mechanisms10.1016/0022-0248(92)90006-5 ↗
34. Prediction of dendritic spacings in a directional- solidification experiment10.1103/PhysRevE.47.2702 ↗
35. Dependency of the dendritic arm spacings and tip radius on the growth velocity and composition in the directionally solidified succinonitrile-carbon tetrabromide alloys10.1016/j.jcrysgro.2004.11.392 ↗
36. Dendrite spacing and microstructure evolution dependent on specimen history10.1016/j.scriptamat.2007.08.013 ↗
37. Oscillatory cellular patterns in three-dimensional directional solidification10.1103/PhysRevE.92.042401 ↗
38. Jackson · 1958 · 174
39. Modeling of solidification microstructures in concentrated solutions and intermetallic systems10.1007/BF02698258 ↗
40. Microstructural length scales in directionally solidified Sn-40at.%Mn peritectic alloy containing intermetallic compounds10.1016/j.intermet.2014.07.009 ↗