journal article·2022-12Open access

Well-dispersed clay in photopolymerized poly(ionic liquid) matrix

Linda Salminen, Erno Karjalainen, Vladimir Aseyev, Heikki Tenhu

Abstract

This contribution presents a methodology for combining the solvating power of ionic liquids with polymer composite synthesis. A polymerizable ionic liquid was used as solvent to disperse clay, after which the mixture was polymerized into a solid polymer-clay composite. Polymer-clay composites were prepared with filler loadings up to 10 wt%. The addition of clay as filler enhanced mechanical properties; tensile strength and stiffness of the materials exhibited appreciable improvements. The glass transition temperature of the materials shifted to slightly higher temperatures due to the hindered segmental motions of the polymer chains. The improvements were the highest at approximately 5 wt% filler content. When the filler content was increased further, excessive aggregate formation impaired the material properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer composites and self-healing · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Nanocomposites from poly(ethylene-co-methacrylic acid) ionomers: effect of surfactant structure on morphology and properties10.1016/j.polymer.2005.01.062 ↗
2. Nanolayer reinforcement of elastomeric polyurethane10.1021/cm980448n ↗
3. Synthesis of nylon 6–clay hybrid by montmorillonite intercalated with ε‐caprolactam10.1002/pola.1993.080310418 ↗
4. Nanocomposites: a new class of flame retardants for polymers10.1016/S1464-391X(02)80151-9 ↗
5. Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy10.1016/j.progpolymsci.2010.03.001 ↗
6. Permeability of polymer/clay nanocomposites: a review10.1016/j.eurpolymj.2009.01.027 ↗
7. Polymer-layered silicate nanocomposites: an overview10.1016/S0169-1317(99)00017-4 ↗
8. An in-situ RAFT polymerization technique for the preparation of poly(N-vinyl imidazole) modified Cloisite nanoclay to develop nanocomposite PEM10.1016/j.polymer.2020.123175 ↗
9. Grafting of vinylimidazolium-type poly(ionic liquid) on silica nanoparticle through RAFT polymerization for constructing nanocomposite based PEM10.1016/j.polymer.2020.122458 ↗
10. Toughening mechanisms of nanoparticle-modified epoxy polymers10.1016/j.polymer.2006.11.038 ↗
11. Anomalous fracture behavior in an epoxy-based hybrid composite10.1016/j.msea.2009.03.028 ↗
12. Epoxy nanocomposites with highly exfoliated clay : mechanical properties and fracture mechanisms10.1021/ma048465n ↗
13. Tensile fracture morphologies of nylon-6/montmorillonite nanocomposites10.1002/pi.1901 ↗
14. Ionic liquids facilitated dispersion of chitin nanowhiskers for reinforced epoxy composites10.1016/j.carbpol.2020.116746 ↗
15. Influences of carbon nanotubes and graphite hybrid filler on properties of natural rubber nanocomposites10.1016/j.polymertesting.2020.106981 ↗
16. Phosphonium-based ionic liquid as crosslinker/dispersing agent for epoxy/carbon nanotube nanocomposites: electrical and dynamic mechanical properties10.1007/s10853-019-04147-7 ↗
17. Dissolution of cellose with ionic liquids10.1021/ja025790m ↗
18. Functionalization and dispersion of carbon nanotubes in ionic liquids10.1016/j.trac.2013.03.007 ↗
19. Progress in imidazolium ionic liquids assisted fabrication of carbon nanotube and graphene polymer composites10.3390/polym5020847 ↗
20. Dissolution of metal oxides in an acid-saturated ionic liquid solution and investigation of the back-extraction behaviour to the aqueous phase10.1016/j.hydromet.2014.01.015 ↗
21. Anodic dissolution of metals in ionic liquids10.1016/j.pnsc.2015.11.005 ↗
22. Effects of anionic structure and lithium salts addition on the dissolution of cellulose in 1-butyl-3-methylimidazolium-based ionic liquid solvent systems10.1039/B916882F ↗
23. Poly(ionic liquid)s: an update10.1016/j.progpolymsci.2013.04.002 ↗
24. Frontiers in poly(ionic liquid)s: syntheses and applications10.1039/C6CS00620E ↗
25. Hydrophobic, highly conductive ambient-temperature molten salts10.1021/ic951325x ↗
26. Synthesis and properties of seven ionic liquids containing 1-Methyl-3-octylimidazolium or 1-Butyl-4-methylpyridinium cations10.1021/je060096y ↗
27. An overview of the mutual solubilities of water–imidazolium-based ionic liquids systems10.1016/j.fluid.2007.07.033 ↗
28. Anion responsive imidazolium-based polymers10.1002/marc.201200525 ↗
29. Alkyl-substituted N-vinylimidazolium polymerized ionic liquids: thermal properties and ionic conductivities10.1002/macp.201100389 ↗
30. Anion exchanged polymerized ionic liquids: high free volume single ion conductors10.1016/j.polymer.2011.01.031 ↗
31. Dielectric relaxation and viscoelastic behavior of polymerized ionic liquids with various counteranions10.1021/ma300040b ↗
32. Tuning the solubility of polymerized ionic liquids by simple anion-exchange reactions10.1002/pola.11015 ↗
33. Synthesis of novel polycations using the chemistry of ionic liquids10.1002/macp.200400411 ↗
34. Bis(trifluoromethylsulfonyl)amide based “polymeric ionic liquids”: synthesis, purification and pecularities of structure-properties relationships10.1016/j.electacta.2011.06.041 ↗
35. Polybenzimidazole based film forming polymeric ionic liquids: synthesis and effects of cation-anion variation on their physical properties10.1039/c3py01709e ↗
36. Pyrrolidinium-based polymeric ionic liquids as mechanically and electrochemically stable polymer electrolytes10.1016/j.jpowsour.2008.11.115 ↗
37. Ionic semi-interpenetrating networks as a new approach for highly conductive and stretchable polymer materials10.1039/C4TA05833J ↗
38. Ternary polymer electrolytes containing pyrrolidinium-based polymeric ionic liquids for lithium batteries10.1016/j.jpowsour.2009.11.146 ↗
39. Tunable ionic control of polymeric films for inkjet based 3D printing10.1021/acssuschemeng.7b04279 ↗
40. 3D-Printable photochromic molecular materials for reversible information storage
41. Dramatic effect of dispersed carbon nanotubes on the mechanical and electroconductive properties of polymers derived from ionic liquids10.1002/smll.200500404 ↗
42. Molecular ordering of organic molten salts triggered by single-walled carbon nanotubes10.1126/science.1082289 ↗
43. Ionic liquids for soft functional materials with carbon nanotubes10.1002/chem.200700554 ↗
44. Bucky gels” for tailoring electroactive materials and devices: the composites of carbon materials with ionic liquids10.1039/c1cc00043h ↗
45. Room temperature ionic liquids for epoxy nanocomposite synthesis: direct dispersion and cure10.1016/j.compscitech.2013.06.016 ↗
46. Preparation of composite materials composed of ι-carrageenan and polymeric ionic liquids10.1002/pc.20862 ↗
47. Preparation of cellulose-polymerized ionic liquid composite by in-situ polymerization of polymerizable ionic liquid in cellulose-dissolving solution10.1016/j.carbpol.2006.12.002 ↗
48. A facile method for preparation of composites composed of cellulose and a polystyrene-type polymeric ionic liquid using a polymerizable ionic liquid10.1016/j.compscitech.2007.06.004 ↗
49. A facile preparation of composites composed of cellulose and polymeric ionic liquids by in situ polymerization of ionic liquids having acrylate groups10.1002/pc.20756 ↗
50. Preparation of chitin/cellulose films compatibilized with polymeric ionic liquids10.1007/s10924-013-0580-4 ↗
51. Preparation of ion conductive inorganic–organic composite systems by in situ sol–gel reaction of polymerizable ionic liquids10.1002/pat.1221 ↗
52. Poly(ionic liquid) based composite electrolytes for lithium ion batteries10.3390/polym13244469 ↗
53. Polymer/montmorillonite nanocomposites with improved thermal properties: Part II. Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes10.1016/j.tca.2006.11.003 ↗
54. Polymer/layered silica nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
55. Preparation of polymer–clay nanocomposites and their properties10.1002/adv.20079 ↗
56. Thermal characterization of surfactant-modified montmorillonites10.1346/CCMN.2005.0530308 ↗
57. Preparation and characterization of a cyclophosphamide-core PAMAM dendritic montmorillonite10.1007/s12633-016-9478-9 ↗
58. Intercalation strategies in clay/polymer hybrids10.1016/j.progpolymsci.2013.07.002 ↗
59. Interlayer structure and molecular environment of alkylammonium layered silicates10.1021/cm00043a025 ↗
60. Nitroxide-mediated polymerization of styrene initiated from the surface of montmorillonite clay platelets10.1002/app.32498 ↗
61. Exfoliation of montmorillonite and related properties of clay/polymer nanocomposites10.1016/j.clay.2018.12.006 ↗
62. The interaction of a crack front with a second-phase dispersion10.1080/14786437008221068 ↗
63. Viscoelastic behavior of the polymerized ionic liquid poly(1-ethyl-3- vinylimidazolium bis(trifluoromethanesulfonylimide))10.1021/ma201611q ↗
64. Dielectric relaxation behavior of polymerized ionic liquids with various charge densities10.1016/j.polymer.2013.04.039 ↗
65. Dielectric relaxation behavior of polymerized ionic liquid10.1021/ma100918e ↗
66. Temperature dependence of the dynamic mechanical properties of filled polymers10.1002/pol.1977.180150408 ↗
67. Controlling the thermomechanical properties of polymer nanocomposites by tailoring the polymer–particle interface10.1002/polb.20926 ↗
68. Preparation and characterization of waterborne polyurethane/clay nanocomposite: effect on water vapor permeability10.1002/app.28985 ↗
69. Effect of silica nanoparticles on structure and properties of waterborne UV-curable polyurethane nanocomposites10.1007/s00289-011-0689-3 ↗
70. Quantitative equivalence between polymer nanocomposites and thin polymer films10.1038/nmat1447 ↗
71. Tailoring of thermomechanical properties of thermoplastic nanocomposites by surface modification of nanoscale silica particles10.1557/PROC-435-237 ↗
72. Fracture behavior of core-shell rubber-modified clay-epoxy nanocomposites10.1002/pen.10137 ↗
73. Processing and characterization of carbon nanotube/poly (styrene-co-butyl acrylate) nanocomposites10.1023/A:1019659624567 ↗
74. Clay-reinforced epoxy nanocomposites10.1002/pi.1166 ↗
75. Clay-Reinforced epoxy10.1021/cm00048a006 ↗
76. Morphology, thermal and mechanical properties of nylon 12/organoclay nanocomposites prepared by melt compounding10.1002/pi.1721 ↗
77. Physical modeling of the interphase in amorphous thermoplastic/glass bead composites10.1002/pc.750150609 ↗
78. Synthesis and characterization of elastomeric polyurethane/clay nanocomposites10.1002/app.1982 ↗