journal article·2023-02

Grain refinement of A517 steel by inoculation with Al–5Ti–B master alloy

Guofang Liang, Yingang Liu, Xianliang Yang, Andrej Atrens, Tao Wu, Zhiqiang Tian, Qiyang Tan, Yu Yin, Jianjun Wang, Ming-Xing Zhang

Publisher page

Abstract

The edge-to-edge matching model was used to identify TiB2 as a potential grain refiner to refine the high temperature delta-ferrite in low carbon steels. To effectively introduce the grain refiner, Al-5Ti-B master alloy (MA) was used to add TiB2 particles into an A517 steel. However, there was no grain refinement in the as-cast A517 steel, attributed to the decomposition of TiB2 particles in the molten A517 steel, into Ti and B. As a result, BN particles formed on the pre-existing Al2O3 particles were detected within prior austenite grains. Nevertheless, there was significant grain refinement after reheating the A517 ingots to 1150 degrees C, isothermally holding for 2 h and air cooling. The austenite grain size of the reheated A517 steel was decreased from 318 +/- 70 mu m to 38 +/- 4 mu m using 0.1 wt% Al-5Ti-B MA. Grain refinement was caused by Ti-containing nanometre-sized precipitates along prior austenite grain boundaries inhibiting the grain growth. The grain refinement improved the strength and ductility of ingots after reheating and improved workability for the production of hot worked products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Mechanical behavior of high-strength, low-alloy steels10.3390/met8080610 ↗
2. Strength and toughness of Fe-1.2Mn-0.3Cr-1.4Ni-0.4Mo-C tempered steel plate in three cooling processes10.1016/j.msea.2019.03.029 ↗
3. Effect of cooling rate on microstructure and mechanical properties of a low-carbon low-alloy steel10.1007/s10853-020-05483-9 ↗
4. Crystallography analysis of toughness in high strength ultra-heavy plate steel10.1016/j.matlet.2019.04.084 ↗
5. Effect of microstructural types on toughness and microstructural optimization of ultra-heavy steel plate: EBSD analysis and microscopic fracture mechanism10.1016/j.msea.2016.02.001 ↗
6. Crystallographic study of grain refinement in low and medium carbon steels10.1080/14786435.2016.1171413 ↗
7. Grain refinement of steels10.1007/BF03378248 ↗
8. Hot-ductility behaviour of C–Mn–Nb–Al steels and its relationship to crack propagation during the straightening of continuously cast strand10.1179/030716979803276471 ↗
9. Development of ultrahigh strength steel by electroslag refining: effect of inoculation of titanium on the microstructures and mechanical properties10.2355/isijinternational.46.1361 ↗
10. Review of grain refinement of cast metals through inoculation: theories and developments10.1007/s11661-017-4275-7 ↗
11. Electromagnetic stirring and continuous casting — achievements, problems, and goals10.1007/BF03338405 ↗
12. Casting of aluminium alloys
13. Grain refinement of magnesium
14. Refinement of austenite grain in carbon steel by addition of titanium and boron10.2355/isijinternational.48.340 ↗
15. Refinement of as-cast austenite microstructure in S45C steel by titanium addition10.2355/isijinternational.48.1373 ↗
16. Numerical analysis on columnar-to-equiaxed transition of δ-ferrite dendrite in carbon steel induced by titanium carbonitride particles10.2355/isijinternational.49.1568 ↗
17. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF02642799 ↗
18. Nucleation catalysis10.1021/ie50510a031 ↗
19. Application of nanoparticles in cast steel: an overview10.1007/s41230-020-0037-z ↗
20. Effect of oxides on nucleation behavior in supercooled iron10.2355/isijinternational1966.17.262 ↗
21. Examination of steel castings for potential nucleation phases10.1007/BF03355495 ↗
22. A new grain refiner for ferritic steels10.1007/s11663-017-1101-y ↗
23. Crystallography of the heterogeneous nucleation of δ-ferrite on Ce2O2S particles during solidification of an Fe-4Si alloy10.1007/s11661-019-05142-y ↗
24. Influence of dissolved cerium and primary inclusion particles of Ce2O3 and CeS on solidification behavior of Fe-0.20 mass%C-0.02 mass%P alloy10.2355/isijinternational.39.722 ↗
25. Effects of rare earth metals on steel microstructures10.3390/ma9060417 ↗
26. Effect of rare earth additions on grain refinement of plain carbon steels10.1007/BF03355527 ↗
27. Understanding the mechanism of grain refinement in plain carbon steels10.1007/BF03355560 ↗
28. Characterization of rare earth inclusions from cast 1010 steel10.1007/BF03355599 ↗
29. Study of rare earth additions effect on the solidification and properties of 4130 steel10.1007/s11665-019-04410-7 ↗
30. Comparison of rare earth refinement in 4130 and HY10010.3390/met11040540 ↗
31. Roles of lanthanum and cerium in grain refinement of steels during solidification10.3390/met8110884 ↗
32. Effect of prior austenite grain size refinement by thermal cycling on the microstructural features of as-quenched lath Martensite10.1007/s11661-016-3525-4 ↗
33. Evolution of precipitates in the Nb–Ti–V microalloyed HSLA steels during reheating10.1016/S1359-6462(02)00567-5 ↗
34. Effects of Ti addition and reheating quenching on grain refinement and mechanical properties in low carbon medium manganese martensitic steel10.1016/j.matdes.2011.08.015 ↗
35. Effects of Ti addition on austenite grain growth during reheating of as-cast 0.2 mass% carbon steel10.2355/isijinternational.52.1832 ↗
36. A comparative study of precipitation effects in Ti only and Ti–V Ultra Low Carbon (ULC) strip steels10.1016/j.matchar.2005.11.010 ↗
37. The influence of CaO addition on grain refinement of cast magnesium alloys10.1016/j.scriptamat.2015.12.015 ↗
38. Crystallography of grain refinement in cast zinc-copper alloys10.1107/S1600576715008936 ↗
39. Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model10.1016/j.actamat.2004.11.037 ↗
40. Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying10.1179/095066001225001049 ↗
41. Understanding mechanisms of grain refinement of aluminium alloys by inoculation10.1179/026708304225022359 ↗
42. Grain refining mechanism in the Al/Al-Ti-B system10.1016/j.actamat.2014.10.055 ↗
43. The peritectic transformation10.1016/0001-6160(77)90248-6 ↗
44. The peritectic reaction10.1016/0956-7151(90)90218-6 ↗
45. Li · 1995
46. The B−Ti (Boron-Titanium) system10.1007/BF02869864 ↗
47. Effects of addition of titanium and boron on columnar austenite grain in carbon steel10.2355/isijinternational.49.1367 ↗
48. The effect of aluminium addition on the evolution of inclusions in an aluminium-killed calcium-treated steel10.3390/met12020181 ↗
49. Effect of boron on intragranular ferrite nucleation mechanism in coarse grain heat-affected zone of high-nitrogen steel10.1016/j.matlet.2019.126819 ↗
50. New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection10.1016/j.msea.2017.07.095 ↗
51. Effects of vanadium and titanium on mechanical properties of low carbon as cast microalloyed steels10.1179/136404606X163505 ↗
52. Mechanical properties of as-cast microalloyed steels produced via investment casting10.1016/j.matdes.2010.08.007 ↗