journal article·2020-10

Synthesis of geopolymer emulsions

Angélique Barneoud-Chapelier, Jérémy Causse, Arnaud Poulesquen

Materials Letters· Volume 276
Publisher page

Abstract

Abstract The understanding of geopolymer emulsion synthesis is a major issue for several industrial applications such as the formation of hierarchically porous material for filtration, lightweight materials for civil engineering or even the conditioning of radioactive mineral oil. The aim of this paper is to study model emulsions (hexadecane dispersed in Na or K-metakaolin based geopolymer) with the highest volume fraction of C16 incorporated. The influence of the viscosity of the geopolymer paste controlled by the water content was studied and results show that emulsions are unstable for a viscosity ratio ηd/ηc lower than 0.01. Up to 70% in volume of C16 was incorporated within the K-geopolymer and hierarchical porous network was thus obtained. After oil removal by solvent extraction, a monolith with a compressive strength of around 0.5–0.6 MPa was characterized in terms of pore size distribution and specific surface area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
2. Effect of aging and alkali activator on the porous structure of a geopolymer10.1107/S160057671303197X ↗
3. Design of lightweight metakaolin based geopolymer foamed with hydrogen peroxide10.1016/j.ceramint.2018.10.021 ↗
4. Geopolymer with hierarchically meso-/macroporous structures from reactive emulsion templating10.1111/jace.12724 ↗
5. Highly porous geopolymers through templating and surface interactions10.1111/jace.13584 ↗
6. Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms10.1016/j.ceramint.2018.03.079 ↗
7. Porous geopolymer as a possible template for a phase change material10.1016/j.matchemphys.2019.121785 ↗
8. Sol–gel process and complex fluids: sculpting porous matter at various lengths scales towards the Si(HIPE), Si(PHIPE), and SBA-15-Si(HIPE) series10.1007/s10971-018-4794-8 ↗
9. C.A. Davy, G. Hauss, B. Planel, D. Lambertin, 3D structure of oil droplets in hardened geopolymer emulsions, J. Am. Ceram. Soc. (2018) jace.16142. https://doi.org/10.1111/jace.16142.10.1111/jace.16142 ↗
10. Porosity, mechanical and insulating properties of geopolymer foams using vegetable oil as the stabilizing agent10.1016/j.jeurceramsoc.2017.09.021 ↗
11. Interplay between silicate and hydroxide ions during geopolymerization10.1016/j.cemconres.2018.09.012 ↗
12. Effect of composition and aging on the porous structure of metakaolin-based geopolymers10.1107/S1600576716014618 ↗
13. Dispersion phenomena in high viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems10.1080/00986448208911047 ↗
14. Stephenson · 1987