Effecting of oxygen and chlorine on nano-structured TiN/Si3N4 films hardness
Source abstract
Abstract
Abstract Using direct current plasma-enhanced chemical vapor deposition (PECVD) techniques, the nanocomposite coatings of nc-TiN/a-Si 3 N 4 were deposited on stainless steel substrates. The coatings were characterized by nano-indentation, elastic recoil detection spectroscopy (ERD), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The effects of oxygen and chlorine were investigated in this paper. A certain content of oxygen and chlorine can strongly decrease the hardness of superhard of nc-TiN/a-Si 3 N 4. It is shown that 1–1.5 at.% of oxygen causes a decrease in hardness decrease to a value of about 30 GPa as compared to 45–55 GPa for a the that of below 0.2 at.% oxygen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Investigation on processing of industrial set-up plasma enhanced chemical vapor deposition with pulsed d.c. power10.1016/S0257-8972(00)00750-7 ↗
2. The plasma assisted chemical vapor deposition of TiC, TiN and TiCXN1−X10.1016/0040-6090(81)90225-X ↗
3. Review of CVD TiN coatings for wear-resistant application: deposition processes, properties and performance10.1016/S0257-8972(05)80002-7 ↗
4. Influence of temperature on the growth of TiN films by plasma-assisted chemical vapour deposition10.1016/0040-6090(88)90274-X ↗
5. Application of hard coatings produced by plasma-assisted chemical vapour deposition10.1016/0257-8972(90)90039-F ↗
6. The search for novel, superhard materials10.1116/1.581977 ↗
7. Structural properties, internal stress and thermal stability of nc-TiN/a-Si3N4, nc-TiN/TiSix and nc-(Ti1−yAlySix)N superhard nanocomposite coatings reaching the hardness of diamond10.1016/S0257-8972(99)00451-X ↗
8. Thermal stability of superhard nanocomposite coatings consisting of immiscible nitrides10.1016/S0257-8972(01)01474-8 ↗
9. J. Prochazka, Superhard TiN/Si3N4 nanocomposites by reactive magnetron sputtering combined with chemical vapour deposition. PhD Thesis, Tech. Univ. Munich (2003).
10. P. Karvankova, Superhard nc-TiN/a-BN/a-TiB2 and nc-MnN/a-metal nanocrystalline composite coatings. PhD Thesis, Tech. Univ. Munich 2003.
11. A concept for the design of novel superhard coatings10.1016/0040-6090(95)06695-0 ↗
12. Superhard nanocrystalline composit materials: the n-TiN/a-Si3N4 system10.1063/1.113110 ↗
13. Mechanical properties and failure modes of TiAl(Si)N single and multiplayer thin films10.1016/S0257-8972(02)00609-6 ↗
14. The coatings on M2 steel produced by PACVD
15. Effect of N2-to-TiCl4 flow rate ratio on the properties of TiN coatings formed by DC-PCVD10.1016/0040-6090(91)90260-5 ↗