journal article·2001-03

Dielectric thick films deposition by particle coating method

Burtrand I. Lee, Jianping Zhang

Materials Research Bulletin· Volume 36· Issue 5-6
Publisher page

Abstract

Abstract A highly stable, water based metal organic BaTiO3 sol yielding pure cubic perovskite structure was developed as a dispersant and binder for BaTiO3 powder coating. Dense, uniform and crack-free BaTiO3 thick films of 2–7 μm were prepared by using the BaTiO3 sol and 0.2 μm X7R based BaTiO3 powders. The film quality and thickness were investigated by optimizing process parameters such as solids concentration and heat treatment. The microstructure was examined by means of AFM. The inorganic BaTiO3 sol filled the pores among the BaTiO3 particles in addition to providing binding action for the BaTiO3 particles as well as promoting adhesion of the film to the substrate. The dielectric measurements demonstrate that the BaTiO3 thick films prepared by the sol-gel/powder coating process have good dielectric properties that are comparable with the data from conventional tape-cast BaTiO3 thin layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Electrophoretic Deposition in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. J. Beeson, L. Mann, S. Venigalla, S. Costantino, Electrical and Physical Characteristics of Low-Fire X7R MLCCs with ≤ 3 μm Active Layer and 70 Ag-30 Pd Electrodes, in: Proceedings of the 8th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, Plymouth, Mass. USA, Oct. 1997, pp. 180–183.
2. Electrophoretic Deposition and Characterization of Micron-scale BaTiO3 Based X7R Dielectric Thick Films10.1111/j.1151-2916.2000.tb01570.x ↗
3. J. Zhang, B.I. Lee, Preparation, Structure Evolution and Dielectric Properties of BaTiO3 Thin Films by an Aqueous Sol-Gel Process, submitted to Thin Solid Films, May 2000.
4. Gene Haertling, Dielectric and Electrooptic Properties of Acetatic Derived PLZT X/65/35 Thin Films, Integrated Ferroelectrics 3 (3) (1993) 207–215.10.1080/10584589308216713 ↗
5. T. Garino, H.K. Bowen, Deposition and Sintering of Particle Films on a Rigid Substrate, J. Am. Ceram. Soc. 70 (11) (1987) C-315–C317.10.1111/j.1151-2916.1987.tb05645.x ↗
6. T. Garino, H.K. Bowen, Photolithographic Patterning of Particulate Films, J. Am. Ceram. Soc. 70 (11) (1987) C-311–C314.10.1111/j.1151-2916.1987.tb05644.x ↗
7. J.P. Zhang, Ph.D. Dissertation, Preparation and Characterization of BaTiO3 Dielectreic Thin/Thick Films for MLCC Applications, Clemson University, August 2000.
8. Barrow · Characterization of Thick Lead Zirconate Titanate Films Fabricated Using a New Sol Gel Based Process, J. Appl. Phys. · 1997 · 81 · 876
9. Shanefield · 1996
10. J. Moulson, J.M. Herbert, Electronic Ceramics: Materials, Properties and Applications, Chapman & Hall, New York, 1990.
11. G. Goodman, Ceramic Capacitor Materials, in: R.C. Buchanan (Ed.), Ceramic Materials for Electronics, Marcel Dekker, New York, 1991, pp. 69–123.
12. S.F. Wang, Dielectric Properties of Fine-Grained Barium Titanate Based X7R Materials, J. Am. Ceram. Soc. 82 (10) (1999) 2677–82.10.1111/j.1151-2916.1999.tb02141.x ↗
13. Y. Park, Y.H. Kim, H.G. Kim, The Effect of Grain Size on Dielectric Behavior of BaTiO3 Based X7R Materials, Mater. Lett. 28 (1996) 101–106.10.1016/0167-577X(96)00054-7 ↗