journal article·2000-05

Surface finish and mechanical strength of dense alumina

A.G. Tomba, A.L. Cavalieri

Materials Research Bulletin· Volume 35· Issue 7
Publisher page

Abstract

Disks of commercial alumina powder were fabricated by slip casting and sintering (1600°C, 2 h). Two different surface treatments were performed: a coarse machining, using a 70 grit diamond wheel (C) and a fine one with SiC paper of 120 and 320 grit (F). In order to study the mechanisms of material deformation and removal and the final superficial features, worn surfaces were analyzed by scanning electron microscopy, profilometry, and residual stress measurements by X-ray diffraction. The fracture strength of the treated specimens was evaluated in biaxial flexure, including a statistical analysis of the data. The results were analyzed, keeping in mind the characteristics of the different surface finishes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. König · Ceram Bull · 1989 · 68 · 545
2. Tomlinson · Ceram Int · 1990 · 16 · 25310.1016/0272-8842(90)90036-F ↗
3. Alfaro · 1990 · Vol. 17 · 485
4. Frei · Ceram Int · 1993 · 19 · 9310.1016/0272-8842(93)90081-2 ↗
5. Cho · J Am Ceram Soc · 1994 · 77 · 244310.1111/j.1151-2916.1994.tb04618.x ↗
6. Olsson · Am Ceram Soc Bull · 1995 · 74 · 48
7. Esposito · J Eur Ceram Soc · 1997 · 17 · 47910.1016/S0955-2219(96)00190-2 ↗
8. Tonshoff · Ceram Ind July · 1997 · 15 · 193
9. Lange · J Am Ceram Soc · 1983 · 66 · C16
10. Samuel · J Am Ceram Soc · 1989 · 72 · 196010.1111/j.1151-2916.1989.tb06007.x ↗
11. Hawman · J Mater Sci · 1985 · 20 · 48210.1007/BF01026517 ↗
12. G. Urretazvizcaya, PhD Thesis, National University of Mar del Plata, Argentina, 1995.
13. Wachtman · J Mater · 1972 · 7 · 188
14. Shetty · Ceram Bull · 1980 · 59 · 1193
15. Batdorf · J Appl Mech · 1974 · 41 · 45910.1115/1.3423310 ↗
16. A.G. Tomba M, PhD Thesis, National University of Mar del Plata, Argentina, 1998.