journal article·2014-10

Negative DC bias effects on the structural, physical, and electrical properties of TiC-containing carbon films prepared by the UBMS method at low temperature

Jaehyeong Lee, Yong Seob Park

Publisher page

Abstract

Abstract The dependence of negative DC bias voltage on the structural, and physical properties of a-C:TiC films grown by an unbalanced magnetron sputtering (UBMS) composed of two targets of carbon and titanium was investigated. From Raman and XPS analyses, the sp 2 bonding fraction increased with increasing DC bias voltage. The sp 2 clusters dispersed in the a-C:TiC film prepared with various negative DC bias voltages were confirmed via HRTEM and XRD analyses. The cluster distribution expanded with increasing negative DC bias voltage due to the increase of energetic ion bombardment. This is attributed to the growth of crystalline phases during sputtering deposition. As the negative DC bias voltage increased, the hardness and elastic modulus values increased with maximum values of about 29.2 GPa and 279 GPa, respectively. The COF of the a-C:TiC films slightly decreased with increasing DC bias voltage. The minimum friction coefficient of the a-C:Ti film was about 0.064. The residual stress of the films was reduced from 1.78 to 1.01 GPa with application of DC bias voltage. In addition, the resistivity and sheet resistance of a-C:Ti films decreased, as the negative DC bias voltage was increased. The a-C:Ti film prepared at −300 V DC bias voltage exhibited the lowest resistivity and sheet resistance of 9.2 × 10 −4 Ω cm and 16.8 Ω/sq., respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
2. Diamond-like carbon: state of the art10.1016/S0925-9635(98)00262-3 ↗
3. Amorphous hydrogenated carbon films for tribological applications I. Development of moisture insensitive films having reduced compressive stress10.1016/0301-679X(96)00017-5 ↗
4. Tribological and electrical properties of metal-containing hydrogenated carbon films10.1063/1.97968 ↗
5. Influence of deposition parameters of the structure and mechanical properties of nanocomposite coatings10.1016/j.surfcoat.2005.12.007 ↗
6. XPS and TEM study of W-DLC/DLC double-layered film10.1016/j.tsf.2009.03.033 ↗
7. Thermal stability and oxidation properties of magnetron sputtered diamond-like carbon and its nanocomposite coatings10.1016/j.diamond.2005.12.005 ↗
8. Tribological properties and wear mechanism of sputtered C/Cr coatings10.1016/S0257-8972(01)01147-1 ↗
9. Synthesis and mechanical properties of hydrogenated carbon and carbon nitride films prepared by magnetron sputtering10.1016/j.tsf.2005.08.095 ↗
10. Interpretation of Raman spectra of disordered and amorphus carbon10.1103/PhysRevB.61.14095 ↗
11. Hard carbon nanocomposite films with low stress10.1016/S0925-9635(00)00429-5 ↗
12. Hardness, intrinsic stress, and structure of the a-C and a-C:H films prepared by magnetron sputtering10.1016/S0925-9635(00)00525-2 ↗
13. Microstructure and tribological properties magnetron sputtered nc-TiC/a-C naocomposite10.1016/j.surfcoat.2004.10.041 ↗
14. Nanocomposite TiC/a-C:H hard coatings deposited by reactive PVD10.1016/S0257-8972(00)00888-4 ↗
15. Influence of the microstructure on the mechanical and tribological behavior of TiC/a-C nanocomposited coatings10.1016/j.tsf.2008.09.091 ↗
16. Surface roughness of diamond-like carbon films prepared using various techniques10.1016/S0257-8972(00)01139-7 ↗
17. Mechanical and tribological properties of TiC/amorphous hydrogenated carbon composite coatings fabricated by DC magnetron sputtering with and without sample bias10.1016/j.diamond.2006.05.010 ↗
18. Characterization and properties of Ti-containing amorphous carbon nanocomposite coatings prepared by middle frequency magnetron sputtering10.1016/j.surfcoat.2005.08.150 ↗
19. Creation of ultra-low friction and wear surfaces micro-devices using carbon films10.1016/j.wear.2005.02.084 ↗
20. Magnetron-sputtered nc-TiC/a-C (Al) tough nanocomposite coatings10.1016/j.tsf.2004.04.007 ↗