Establishment of empirical relations amidst mechanical attributes of friction stir welded distinctive alloys of Mg and optimized process parameters
Source abstract
Abstract
Abstract This experimental investigation aims to formulate quadratic regression based empirical model taking into account the parameters of friction stir welding (FSW) process for predicting the optimized process parameters to maximize the response (i.e., ultimate tensile strength) of the distinctive alloys of Mg joints. Parameters of FSW process taken into consideration includes tool’s traverse speed, axial force and rotational speed of tool and response being the fabricated joint’s tensile strength. A central composite rotatable category 3–factor, 5 level design based matrix was formulated and response surface methodology was used to obtain regression based models, to generate contour plots and to visualize the interactive impacts of parameters on the joint’s tensile strength. Formulated quadratic regression based model was validated employing analysis of variance. Comparison amidst the realistic and anticipated values of the response announced the superior fitting accuracy of the formulated quadratic model. For a constant tool’s rotational speed (of 1000 rpm to 1250 rpm), the tensile strength was observed to be highly sensitive to the axial force values than the tool traverse speed values. Mean tensile strength of the friction stir welded AZ31B, AZ80A, AZ91C, AM50A and ZK51A-T5 Mg joints during the employment of optimized process parameters were found to be 217.5 MPa, 251.4 MPa, 231.9 MPa, 192.1 MPa and 173.2 MPa respectively, thereby exhibiting perfect agreement with the anticipated values.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Mechanism and microstructure of oxide fluxes for gas tungsten arc welding of magnesium alloy10.1007/s11661-006-9056-7 ↗
2. Experimental study of electron beam welding of magnesium alloys10.1007/s12598-011-0304-7 ↗
3. Enhancing friction stir weldability of 6061-T6 Al and AZ31B Mg alloys assisted by external non-rotational shoulder10.1007/s11665-017-2640-8 ↗
4. Development of thermo mechanical model for prediction of temperature diffusion in different FSW tool pin geometries during joining of AZ80A Mg alloys10.1007/s10904-021-01931-4 ↗
5. Effect of heat treatment and number of passes on the microstructure and mechanical properties of friction stir processed AZ91C magnesium alloy10.1007/s12206-016-0121-x ↗
6. Ultrasonic welding of magnesium alloys: a review10.1080/10426914.2020.1758330 ↗
7. Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys10.1007/s00170-017-1565-6 ↗
8. Study of weld characteristics in friction stir welding of dissimilar Mg-Al-Zn magnesium alloys under varying welding conditions10.1007/s11665-021-05893-z ↗
9. MIG welding of magnesium alloys metallographic aspects10.1007/BF03266424 ↗
10. Ultrasonic spot welding of a rare-earth containing ZEK100 magnesium alloy: effect of welding energy10.1007/s11661-016-3355-4 ↗
11. Study on the burning loss of magnesium in fiber laser welding of an Al-Mg alloy by optical emission spectroscopy10.1007/s00170-016-8867-y ↗
12. Generation of force and torque during joining of AZ91C plates by FSW under distinctive tool tilt angle and their impact on mechanical strength and micro-structure10.1080/01694243.2022.2057763 ↗
13. The effects of interface gap on weld strength during overlapping fiber laser welding of AISI 304 stainless steel and AZ31 magnesium alloys10.1007/s00170-016-9681-2 ↗
14. Analysis of the influence of welding parameters on defects and welding characteristics of aluminum-magnesium alloy 5052-H34 in the FSW process10.1007/s00170-022-09701-3 ↗
15. Investigation of ultrasonic assisted friction stir spot welding of magnesium alloy to aluminum alloy10.1007/s11223-016-9730-y ↗
16. Investigations on the effect of sheets positioning in advancing & retreating side for dissimilar FSW of DH36 steel and aluminum alloy 606110.1007/s40032-021-00714-7 ↗
17. Microstructures and properties of copper to stainless steel joints by hybrid FSW10.1007/s13632-017-0398-x ↗
18. FSW of low carbon steel using tungsten carbide (WC-10wt.%Co) based tool material10.1007/s12206-019-0932-7 ↗
19. Influence of hook geometry on failure mechanism of Al6061-galvanized steel dissimilar FSW lap joint10.1007/s43452-022-00471-z ↗
20. Optimization of friction stir spot welding process parameters of dissimilar Al 5083 and C 10100 joints using response surface methodology10.3103/S1067821216050151 ↗
21. Generation of regression models and multi-response optimization of friction stir welding technique parameters during the fabrication of AZ80A Mg alloy joints10.1139/tcsme-2019-0162 ↗
22. A multi-objective optimization of the friction stir welding process using RSM-based-desirability function approach for joining aluminum alloy 6063-T6 pipes10.1007/s00158-020-02542-2 ↗
23. Establishing mathematical relationships to study tensile behavior of friction stir welded AA5086-H32 aluminium alloy joints10.1007/s12633-018-9858-4 ↗
24. Influence of FSW process parameters on formability and mechanical properties of tailor welded blanks AA6082-T6 and AA5083-O using RSM with GRA-PCA approach10.1007/s12666-021-02255-0 ↗
25. Tensile behavior, microstructure, and substructure of the friction stir welded 70/30 brass joints: RSM, EBSD, and TEM study10.1016/j.acme.2018.09.009 ↗
26. Montgomery · 1984
27. Johnson · 1964
28. Modeling and optimization of the yield strength and tensile strength of Al7075 butt joint produced by FSW and SFSW using RSM and desirability function method10.1007/s12666-020-02075-8 ↗
29. Performance analysis of dissimilar friction stir welded aluminium alloy AA5052 and HSLA steel butt joints using response surface method10.1007/s00170-016-8337-6 ↗
30. Friction stir welding of age-hardenable aluminum alloys: a parametric approach using RSM based GRA coupled with PCA10.1007/s40032-014-0116-2 ↗
31. Analysis of the effect of friction stir welding parameters on characteristics of AA6061 composites using response surface methodology10.1007/s12666-021-02214-9 ↗
32. Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology10.1007/s12206-015-0527-x ↗
33. Parametric optimization of friction stir welding process of age hardenable aluminum alloys−ANFIS modeling10.1007/s11771-016-3239-1 ↗
34. Experimental identification of optimized process parameters for FSW of AZ91C Mg alloy using quadratic regression models10.5545/sv-jme.2020.6929 ↗
35. Microstructure and mechanical properties of 9% nickel steel welded by FSW Manufacturing Technology10.1007/s00170-020-06313-7 ↗
36. Optimization of the welding properties of friction stir weld butt joints using the response surface method based on taguchi’s design10.1007/s11223-022-00400-8 ↗
37. Fatigue behavior of FSW high-yield strength steel welds for shipbuilding application10.1007/s40194-019-00750-z ↗