A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM
Source abstract
Abstract
In the present work, the effects of annealing temperature on fracture toughness and anisotropy properties of Mg-Li alloys have been studied for the first time, comprehensively. To do this, two different annealing temperatures, including 200 °C and 350 °C, have been exerted on the produced sheets of LZ71 and LZ91 alloys. Also, microstructure observations, microhardness measurements, and phase analysis of the samples have been accomplished using optical microscopy (OM), vickers microhardness test, and x-ray Diffraction (XRD) analysis, respectively. Moreover, uniaxial tensile tests were accomplished to study the mechanical and anisotropy properties of the produced plates. Furthermore, to evaluate the fracture properties and observe the fracture behavior of the samples, the first mode fracture test and fractography have been carried out. From the OM photographs and XRD results, present Mg-Li alloys contain dual-phase microstructures including a partitioned lattice Hexagonal Closest Packed (HCP) structures of α-Mg phase spread in a Body Centered Cubic (BCC) matrix of β-Mg-Li. Calculated anisotropy coefficients demonstrated that r-values of as-rolled and annealed specimens of LZ71 were more than that of LZ91 in all directions. The results of performed fracture tests showed that the fracture toughness values of all samples of LZ71 were considerably more than that of LZ91 while the trends of the changes in fracture toughness of the alloys were not the same. In addition, in the present study, Response Surface Method (RSM) has been applied to fit a model between variables and responses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. 10.1016/j.jallcom.2017.12.02510.1016/j.jallcom.2017.12.025 ↗
2. 10.1016/j.jallcom.2018.07.02410.1016/j.jallcom.2018.07.024 ↗
3. 10.1016/j.jallcom.2014.06.15110.1016/j.jallcom.2014.06.151 ↗
4. 10.1016/j.jallcom.2007.05.10610.1016/j.jallcom.2007.05.106 ↗
5. 10.1179/1743280414Y.000000004410.1179/1743280414Y.0000000044 ↗
6. 10.1016/S1003-6326(18)64635-710.1016/S1003-6326(18)64635-7 ↗
7. 10.1016/S1359-6454(01)00297-X10.1016/S1359-6454(01)00297-X ↗
8. 10.1016/j.actamat.2008.08.03710.1016/j.actamat.2008.08.037 ↗
9. 10.1016/j.actamat.2016.09.03610.1016/j.actamat.2016.09.036 ↗
10. 10.1016/j.jmatprotec.2007.12.04510.1016/j.jmatprotec.2007.12.045 ↗
11. 10.1016/j.matdes.2008.04.00110.1016/j.matdes.2008.04.001 ↗
12. 10.1016/j.msea.2017.06.07710.1016/j.msea.2017.06.077 ↗
13. 10.1016/S1002-0721(16)60163-110.1016/S1002-0721(16)60163-1 ↗
14. 10.1016/j.matdes.2015.07.00310.1016/j.matdes.2015.07.003 ↗
15. 10.1016/j.jre.2017.08.00110.1016/j.jre.2017.08.001 ↗
16. 10.1016/j.msea.2017.08.03710.1016/j.msea.2017.08.037 ↗
17. 10.1007/s11706-014-0252-x10.1007/s11706-014-0252-x ↗
18. 10.1016/j.jallcom.2009.07.04710.1016/j.jallcom.2009.07.047 ↗
19. 10.1016/j.jallcom.2018.01.34410.1016/j.jallcom.2018.01.344 ↗
20. 10.1007/s11661-013-1699-610.1007/s11661-013-1699-6 ↗
21. 10.1016/j.matdes.2015.08.12310.1016/j.matdes.2015.08.123 ↗
22. 10.1016/j.matdes.2014.12.05710.1016/j.matdes.2014.12.057 ↗
23. 10.1016/j.msea.2015.03.03810.1016/j.msea.2015.03.038 ↗
24. 10.1016/j.msea.2015.10.06610.1016/j.msea.2015.10.066 ↗
25. 10.1016/j.matlet.2006.03.05210.1016/j.matlet.2006.03.052 ↗
26. 10.1016/j.msea.2013.12.02910.1016/j.msea.2013.12.029 ↗
27. 10.1016/S0921-5093(01)01411-310.1016/S0921-5093(01)01411-3 ↗
28. 10.1016/j.actamat.2007.10.03010.1016/j.actamat.2007.10.030 ↗
29. 10.1016/S0921-5093(01)01105-410.1016/S0921-5093(01)01105-4 ↗
30. 10.1016/j.msea.2007.01.15510.1016/j.msea.2007.01.155 ↗
31. 10.1002/adem.20040002110.1002/adem.200400021 ↗
32. 10.1016/j.ijfatigue.2004.03.01510.1016/j.ijfatigue.2004.03.015 ↗
33. 10.1016/j.jallcom.2017.11.14110.1016/j.jallcom.2017.11.141 ↗
34. 10.1016/j.msea.2010.08.09410.1016/j.msea.2010.08.094 ↗
35. 10.1016/j.msea.2008.02.00310.1016/j.msea.2008.02.003 ↗
36. 10.1016/j.scriptamat.2009.08.03710.1016/j.scriptamat.2009.08.037 ↗
37. 10.1016/j.matdes.2015.10.11110.1016/j.matdes.2015.10.111 ↗
38. 10.1016/j.actamat.2017.07.03010.1016/j.actamat.2017.07.030 ↗
39. 10.1016/j.actamat.2017.12.02610.1016/j.actamat.2017.12.026 ↗
40. 10.1016/j.actamat.2018.02.06310.1016/j.actamat.2018.02.063 ↗
41. 10.1016/j.actamat.2017.10.06310.1016/j.actamat.2017.10.063 ↗
42. 10.1016/j.actamat.2018.09.04810.1016/j.actamat.2018.09.048 ↗
43. Rahmatabadi D · Mater. Res. Express · 2019 · 6
44. 10.1007/s00170-018-2710-610.1007/s00170-018-2710-6 ↗
45. 10.18869/acadpub.jame.36.2.1510.18869/acadpub.jame.36.2.15 ↗
46. 10.1016/j.measurement.2015.02.05710.1016/j.measurement.2015.02.057 ↗
47. 10.25211/jeas.v36i2.6810.25211/jeas.v36i2.68 ↗
48. 10.1016/j.matdes.2015.07.12910.1016/j.matdes.2015.07.129 ↗
49. Madhusudhana H · IOP Conf. Series: Materials Science and Engineering · 2018
50. Mishra A · Mater. Res. Express · 2018 · 610.1088/2053-1591/aaeb7c ↗
51. 10.1016/j.matdes.2014.09.04410.1016/j.matdes.2014.09.044 ↗
52. Ghangas G · Mater. Res. Express · 2018 · 6 · 02655310.1088/2053-1591/aaed9b ↗
53. Maboud A A G A · Mater. Res. Express · 2018 · 6 · 02652710.1088/2053-1591/aaed7c ↗
54. 10.1016/j.cep.2018.08.00610.1016/j.cep.2018.08.006 ↗
55. 10.1016/j.advengsoft.2009.10.01010.1016/j.advengsoft.2009.10.010 ↗
56. 10.1016/j.measurement.2011.12.00410.1016/j.measurement.2011.12.004 ↗
57. 10.1007/s10098-016-1186-z10.1007/s10098-016-1186-z ↗
58. Myers R H · Response Surface Methodology: Process and Product Optimization Using Designed Experiments · 1995 · 3
59. ASTM E8 / E8M-16a · Standard Test Methods for Tension Testing of Metallic Materials · 2016
60. ASTM E21-17 · Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials · 2017
61. 10.1016/j.msea.2005.04.00410.1016/j.msea.2005.04.004 ↗
62. ASTM E517-18 · Standard Test Method for Plastic Strain Ratio r for Sheet Metal · 2018
63. 10.1016/j.nucengdes.2004.10.00510.1016/j.nucengdes.2004.10.005 ↗
64. ASTM E647-15e1 · Standard Test Method for Measurement of Fatigue Crack Growth Rates · 2015
65. 10.12989/sem.2014.52.5.95710.12989/sem.2014.52.5.957 ↗
66. 10.1016/j.engfailanal.2016.03.01010.1016/j.engfailanal.2016.03.010 ↗
67. 10.1016/j.msea.2017.09.08510.1016/j.msea.2017.09.085 ↗
68. 10.1115/1.404054210.1115/1.4040542 ↗
69. 10.1016/j.msea.2018.08.01710.1016/j.msea.2018.08.017 ↗
70. 10.1016/j.ceramint.2016.07.00210.1016/j.ceramint.2016.07.002 ↗
71. 10.1016/j.jallcom.2013.08.02010.1016/j.jallcom.2013.08.020 ↗
72. 10.1016/j.matdes.2014.10.04910.1016/j.matdes.2014.10.049 ↗
73. 10.1016/j.scriptamat.2006.12.01710.1016/j.scriptamat.2006.12.017 ↗
74. 10.1007/s11106-018-9962-410.1007/s11106-018-9962-4 ↗
75. 10.3139/146.11156610.3139/146.111566 ↗
76. 10.1007/s12613-018-1603-x10.1007/s12613-018-1603-x ↗
77. Montgomery D C · Design and Analysis of Experiments · 2008
78. 10.1016/j.ultsonch.2017.05.03310.1016/j.ultsonch.2017.05.033 ↗
79. 10.1007/s00449-011-0514-210.1007/s00449-011-0514-2 ↗