The effect of thermoplastic starch on the properties of polypropylene/high density polyethylene blend reinforced by nano-clay
Source abstract
Abstract
Abstract Polypropylene (PP) and high density polyethylene (HDPE) was melt-blended in pairs at a constant of 80:20 (mm) compositions; this blend is prepared by one-step reactive extrusion in a single-screw extruder. The present study aims to investigate the effect of thermoplastic starch (TPS) on the properties of PP and HDPE blend. This later has been investigated in the absence and presence of maleic anhydride grafted polyethylene (PE-g-MA), and reinforced by nano-clay. All the blends/nano-bio-composites were prepared in an internal mixer. The results indicates changes in the blends in terms of morphological, Mechanical, Thermal, structural and rheological properties. However, the different blends and nano-bio-composites were studied by means of Thermogravimetry (TG), Differential scanning calorimeter (DSC), Melt flow index (MFI), Izod impact (unnotched) tests, Scanning Electron Microscopy (SEM) and x-ray diffraction (XRD).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Biodegradable polymers
2. Nano-biocomposites: biodegradable polyester/nanoclay systems10.1016/j.progpolymsci.2008.10.002 ↗
3. Polymer nanocomposites: how to reach low flammability ?10.1002/masy.200690016 ↗
4. Biodegradation of maleated linear low-density polyethylene and starch blends10.1016/S0141-3910(96)00212-1 ↗
5. Characterization of PP/HDPE blend-based nanocomposites using different maleated polyolefins as compatibilizers10.1016/j.polymertesting.2010.01.004 ↗
6. Starch-based nano-biocomposites: Plasticizer impact on the montmorillonite exfoliation process10.1016/j.carbpol.2009.10.018 ↗
7. Influence of composition on the morphology of polypropylene/polycarbonate blends10.1016/0032-3861(88)90388-6 ↗
8. Effect of organoclay on blends of individually plasticized thermoplastic starch and polypropylene10.1016/j.indcrop.2013.10.016 ↗
9. Preparation and properties of extruded thermoplastic starch/polymer blends.’10.1002/app.36724 ↗
10. Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends10.1016/j.eurpolymj.2004.02.026 ↗
11. Preparation and characterisation of biodegradable starch‐based nanocomposite materials10.1002/pi.1287 ↗
12. A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites10.1016/S0032-3861(01)00512-2 ↗
13. Effect of organoclay on morphology and properties of linear low density polyethylene and Vietnamese cassava starch biobased blend10.1016/j.carbpol.2015.09.020 ↗
14. Improvement of properties of glycerol plasticized starch films by blending with a low ratio of polycaprolactone and/or polyethylene glycol10.1016/j.foodhyd.2015.11.029 ↗
15. Processing, performance and biodegradability of a thermoplastic aliphatic polyester/starch system10.1016/S0032-3861(99)00014-2 ↗
16. New polylactide/layered silicate nanocomposites, 6 melt rheology and foam processing
17. Polymer/layered silicate nanocomposites: a review from preparation to processing.10.1016/j.progpolymsci.2003.08.002 ↗
18. High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene10.1016/S0032-3861(02)00907-2 ↗
19. Polypropylene and potato starch biocomposites: Physicomechanical and thermal properties10.1002/app.33486 ↗
20. Study on ternary low density polyethylene/linear low density polyethylene/thermoplastic starch blend films10.1016/j.carbpol.2014.11.038 ↗
21. Preparation and characterization of compatible thermoplastic starch/polyethylene blends10.1016/j.polymdegradstab.2004.08.012 ↗
22. Hydrogen ion conducting starch-chitosan blend based electrolyte for application in electrochemical devices10.1016/j.electacta.2015.01.167 ↗
23. Processing and characterization of thermoplastic starch/polyethylene blends10.1016/S0032-3861(97)81176-7 ↗
24. Interface/morphology relationships in polymer blends with thermoplastic starch10.1016/j.polymer.2009.09.055 ↗
25. Preparation of poly (propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)10.1002/pat.420 ↗
26. Teyssandier · 2011
27. Morphology, thermomechanical properties, and biodegradability of low density polyethylene/starch blends10.1002/1097-4628(19991213)74:12<2791::AID-APP2>3.0.CO;2-4 ↗
28. Using of a compatibilizer to improve morphological, physical and mechanical properties of biodegradable plastic from thermoplastic starch/LLDPE blends
29. Using of compatibilizer for improve morphological physical and mechanical properties of biodegradable plastic from thermoplastic-strach-polyetylene blends
30. Advances in thermal and mechanical behaviors of pp/clay nanocomposites10.1080/03602559.2016.1233282 ↗