journal article·2020-01-01Open access

Effect of fiber orientation on dynamic mechanical properties of PALF hybridized with basalt reinforced epoxy composites

Parameswara Rao Venkata Doddi, Ratnam Chanamala, Siva Prasad Dora

Materials Research Express· Volume 7· Issue 1

Abstract

Abstract In this modern era, the natural fibers usage in automobile and construction sectors has been increased. The goal of the current work was to investigate the fiber orientation effect on dynamic mechanical properties of hybrid Pineapple Leaf Fibre (PALF) hybridized with basalt reinforced epoxy composite at changing vibration frequencies. Hand Lay-up technique was used to manufacture the composites by keeping the unidirectional basalt fabric as an outer layer by keeping PALF as inner layer followed by static compression method. Tensile and flexural moduli were also determined apart from storage modulus (E′) and damping factor (tan δ) for different PALF fiber angles. The results exemplified that not only the storage modulus and loss factor but also glass transition temperature (Tg) as well found to increase with frequency and also the fiber orientation angle has a greater impact on dynamic and static properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Review of natural fibre-reinforced hybrid composites10.1177/0731684417745368 ↗
2. Review on basalt fiber
3. A review on interface modification and characterization of natural fiber reinforced plastic composites10.1002/pen.10846 ↗
4. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review10.1007/s10924-006-0042-3 ↗
5. Recent developments in chemical modification and characterization of natural fiber-reinforced composites10.1002/pc.20461 ↗
6. Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions10.1016/j.compositesa.2014.08.018 ↗
7. Effect of nickel electroplating on the mechanical damping and storage modulus of metal matrix composites10.1088/2053-1591/aadf0b ↗
8. Damping behavior of metal matrix composites10.1007/s12666-014-0462-z ↗
9. Dynamic mechanical behavior of WC-Co coated A356.2 aluminum alloy10.1016/j.jallcom.2018.07.203 ↗
10. A review on dynamic mechanical properties of natural fibre reinforced polymer composites10.1016/j.conbuildmat.2015.12.075 ↗
11. Effect of stacking sequence on flexural and dynamic mechanical properties of hybrid sisal/glass polyester composite
12. Influence of stacking sequence on the mechanical and dynamic mechanical properties of Cotton/Glass fiber reinforced polyester composites10.1590/1980-5373-MR-2016-0058 ↗
13. Effects of fibre orientation and content on the mechanical, dynamic mechanical and thermal expansion properties of multi-layered glass/carbon fibre-reinforced polymer composites10.1177/0021998314532151 ↗
14. Influence of angle ply orientation on the flexural strength of basalt and carbon fiber reinforced hybrid composites10.7234/composres.2015.28.1.001 ↗
15. Effect of frequencies on dynamic mechanical properties of hybrid jute/sisal fibre reinforced epoxy composite10.1080/2374068X.2017.1365443 ↗
16. Study of hybridized kenaf/PALF reinforced HDPE composites by dynamic mechanical analysis10.1080/03602559.2011.618166 ↗
17. Influence of fibre modification on interfacial adhesion and mechanical properties of pineapple leaf fibre-epoxy composites
18. Improvement of physic mechanical properties of pineapple leaf fiber reinforced composite10.1155/2018/7384360 ↗
19. A review on pineapple leaves fibre and its composites10.1155/2015/950567 ↗
20. Tensile properties of epoxy composites reinforced with continuous PALF fibers
21. Bending test in epoxy composites reinforced with continuous and aligned PALF fibers10.1016/j.jmrt.2017.09.003 ↗
22. The effect of surface treatments on the mechanical properties of basalt reinforced epoxy composites10.1002/pc.22412 ↗
23. Mechanical characterization of basalt fibre reinforced plastic10.1016/j.compositesb.2011.01.030 ↗
24. Dynamic mechanical properties of epoxy based PALF/basalt hybrid composite laminates10.1088/2053-1591/ab3dd7 ↗
25. Review on mechanical properties evaluation of pineapple leaf fibre (PALF) reinforced polymer composites10.1016/j.compositesb.2019.106927 ↗
26. An investigation of mechanical properties of madar fiber reinforced polyester composites for various fiber length and fiber content10.1088/2053-1591/aae5bd ↗
27. Response of carbon-basalt hybrid fiber reinforcement polymer under flexural load10.1088/2053-1591/aad3ad ↗
28. Influence of basalt fiber hybridization on the vibration-damping properties of glass fiber reinforced epoxy laminates
29. The effects of stacking sequence and thermal cycling on the flexural properties of laminate composites of aluminium-epoxy/basalt-glass fibres10.1088/2053-1591/aaa92c ↗
30. Effect of fibre loading and Ca(OH)2 treatment on thermal, mechanical, and physical properties of pineapple leaf fibre/polyester reinforced composites10.1088/2053-1591/ab2702 ↗
31. Biodegradability and mechanical properties of pineapple leaf/coir Fiber reinforced hybrid epoxy composites10.1088/2053-1591/aaf8d6 ↗