journal article·2024-06-01Open access

The importance of print orientation in numerical modelling of 3D printed structures under impact loading

Tom Fisher, Zafer Kazancı, José Humberto S Almeida Jr

Materials Research Express· Volume 11· Issue 6

Abstract

Abstract Anisotropy is commonly observed in 3D-printed polymer and composite parts, particularly when manufactured by fused filament fabrication (FFF). This anisotropy can lead to difficulty obtaining accurate material properties during mechanical characterisation. This study establishes a connection between the print parameters used in specimen characterisation and their influence on the accuracy of numerical models for 3D-printed cellular structures under impact. Material properties from only one of the characterisation variants studied, with a parallel infill, accurately represented the force response and physical damage of the experimental samples. In contrast, the default characterisation specimen with a ±45° infill underpredicted the peak force and overpredicted the impact duration, potentially leading to underestimating impact severity. This discrepancy could result in greater damage to a person or structure being protected. It is recommended that the parallel infill pattern be used when characterising materials for use in FFF cellular structures under impact loading to ensure more reliable simulations and improved design of impact-resistant structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Gibson · 1997
2. Schaedler · Architected Cellular Materials · 2016 · 46 · 18710.1146/annurev-matsci-070115-031624 ↗
3. Heterogeneous geometric designs in auxetic composites toward enhanced mechanical properties under various loading scenarios10.1016/j.coco.2023.101499 ↗
4. 3D printing with a 3D printed digital material filament for programming functional gradients10.1038/s41467-024-47480-5 ↗
5. Blast mitigation using polymeric 3D printed auxetic re-entrant honeycomb structures: a preliminary study10.1177/20414196211052062 ↗
6. Perspectives on additive manufacturing for dynamic impact applications10.1016/j.matdes.2022.110963 ↗
7. Review of design techniques of armored vehicles for protection against blast from improvised explosive devices
8. Current trends in additively manufactured (3D printed) energy absorbing structures for crashworthiness application—a review10.1080/17452759.2022.2074698 ↗
9. Crushing investigation of crash boxes filled with honeycomb and re-entrant (auxetic) lattices10.1016/j.tws.2020.106676 ↗
10. Development of high performing 3d printed polymeric cellular structures for wearable impact protection
11. Developing fall-impact protection pad with 3D mesh curved surface structure using 3D printing technology10.3390/polym11111800 ↗
12. Development of hip protectors for snowboarding utilizing 3D modeling and 3D printing10.1186/s40691-020-00236-3 ↗
13. A review on the melt extrusion-based fused deposition modeling (FDM): background, materials, process parameters and military applications10.1007/s12008-023-01354-0 ↗
14. The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer10.1007/s00170-020-06138-4 ↗
15. The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabrication10.1016/j.mtcomm.2018.12.003 ↗
16. Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion10.1016/j.addma.2022.103369 ↗
17. Using extrusion-based 3D printing technology to investigate the impact of changing print conditions on tensile characteristics10.1108/RPJ-06-2023-0204 ↗
18. Tension and compression properties of 3D-Printed composites: print orientation and strain rate effects10.3390/polym15071708 ↗
19. Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites10.1016/j.coco.2020.100478 ↗
20. Effect of raster angle on mechanical properties of 3D printed short carbon fiber reinforced acrylonitrile butadiene styrene10.1016/j.coco.2022.101163 ↗
21. A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites10.1016/j.compscitech.2022.109872 ↗
22. Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites10.1016/j.compositesb.2019.107147 ↗
23. Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites10.1016/j.compscitech.2022.109618 ↗
24. Additive manufacturing of continuous fiber reinforced polymer composites: design opportunities and novel applications10.1016/j.coco.2021.100907 ↗
25. The role of printing parameters on the short beam strength of 3D-printed continuous carbon fibre reinforced epoxy-PETG composites10.1016/j.compstruct.2024.118034 ↗
26. Fused filament fabrication of fiber-reinforced polymers: A review10.1016/j.addma.2018.01.002 ↗
27. Guidance on the use of existing ASTM polymer testing standards for ABS parts fabricated using FFF10.1520/SSMS20190051 ↗
28. Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process10.1108/RPJ-01-2019-0017 ↗
29. An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts10.1016/j.coco.2020.100605 ↗
30. Fiber orientation effects in fused filament fabrication of air-cooled heat exchangers10.1007/s11837-017-2733-8 ↗
31. Comparison of strength of 3D printing objects using short fiber and continuous long fiber10.1088/1757-899X/406/1/012042 ↗
32. Deformation and failure of semicrystalline polymers under dynamic tensile and biaxial impact loading10.1016/j.ijimpeng.2016.08.004 ↗
33. Simulia · ABAQUS User’s Manual · 2020
34. Energy absorption enhancement of additively manufactured hexagonal and re-entrant (auxetic) lattice structures by using multi-material reinforcements10.1016/j.addma.2022.103076 ↗
35. Tunable 3D printed composite metamaterials with negative stiffness10.1088/1361-665X/ad06df ↗
36. Bartlett · 2007 · 29210.4324/9780203462027 ↗
37. Brain injury and impact characteristics10.1007/s10439-019-02199-z ↗
38. Numerical and experimental analysis of the mode i interlaminar fracture toughness in multidirectional 3D-printed thermoplastic composites reinforced with continuous carbon fiber10.3390/polym15102403 ↗
39. Investigation of viscoelastic properties in composite sandwich panels subjected to low-velocity impact: Experimental and numerical approaches10.1177/10996362231158599 ↗
40. Additive manufacturing of short carbon filled fiber nylon: effect of build orientation on surface roughness and viscoelastic behavior10.1007/s00170-023-12503-w ↗