journal article·2024-01-01Open access

A high Q-factor metamaterial sensor based on electromagnetically induced transparency-like

Zhaoyang Shen, Hang Zhang, Jing Zhang

Materials Research Express· Volume 11· Issue 1

Abstract

Abstract This paper proposes an electromagnetically induced transparency-like (EIT-like) metamaterial with a high-quality factor (143.54), which is composed of a square ring resonator (SRR) and a cross-shaped resonator (CR). The designed metamaterial generates a sharp transparency peak at 15.79 GHz. The electric field distributions reveal that appearance of the transparency window results from the coupling between bright mode and dark mode. Moreover, analysis of the surface current distributions verifies that the EIT-like effect is induced by the destructive interference of the electric dipoles . Furthermore, the metamaterial is equated to a circuit model, which provides a better fit to the simulated transmission spectrum. These theories fully explain the generation mechanism of the EIT-like phenomenon. In addition, the EIT-like metamaterial is able to detect the dielectric constant of the target analyte (glucose solution), and the sensing performance is evaluated. The results demonstrate that the sensitivity (S) is 4.80 GHz R−1IU−1 and the figure of merit (FOM) reaches 43.71. The proposed EIT-like metamaterial shows prominent sensing abilities, consequently it has potential applications in environmental monitoring, biological and chemical measurements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metamaterials and Metasurfaces Applications · Antenna Design and Analysis · Energy Harvesting in Wireless Networks

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Analogy of multi-band electromagnetically induced transparency metamaterial based on simple combination of split-ring resonators10.35848/1882-0786/ac79a0 ↗
2. Manipulation of electromagnetically induced transparency by planar metamaterial10.1007/s00339-016-9604-y ↗
3. A dual-band compact metamaterial absorber with fractal geometry10.3390/electronics8080879 ↗
4. Study on temperature adjustable terahertz metamaterial absorber based on vanadium dioxide10.1109/ACCESS.2020.2992700 ↗
5. Influence of structural parameters on a novel metamaterial absorber structure at k-band frequency10.1007/s11664-016-4426-4 ↗
6. Simultaneous transmissive and reflective polarization conversion cross different operating bands in a single metasurface10.1016/j.optlastec.2023.110071 ↗
7. Ultra-broadband and high-efficiency polarization conversion metamaterial based on a metal combination water structure10.1364/OE.474173 ↗
8. Terahertz Metamaterials for linear polarization conversion and anomalous refraction10.1126/science.1235399 ↗
9. Extremum-seeking control of the beam pattern of a reconfigurable holographic metamaterial antenna10.1364/JOSAA.33.000059 ↗
10. Design of arbitrarily controlled multi-beam antennas via optical transformation10.1007/s10762-009-9463-0 ↗
11. Electromagnetically induced transparency10.1063/1.881806 ↗
12. Analog of electromagnetically induced transparency from electric dipole and quadrupole excitation with a Reuleaux triangle split-ring resonator10.1063/5.0085583 ↗
13. Wideband and multiband electromagnetically induced transparency in graphene metamaterials10.1142/S0217979219500681 ↗
14. Electrical control of electromagnetically induced transparency by terahertz metamaterial funneling10.1002/adom.201801205 ↗
15. Electrically active manipulation of electromagnetic induced transparency in hybrid terahertz metamaterial10.1364/OME.6.003075 ↗
16. Tuning all-optical analog to electromagnetically induced transparency in nanobeam cavities using nanoelectromechanical system10.1038/srep14379 ↗
17. A novel planar metamaterial design for electromagnetically induced transparency and slow light10.1364/OE.21.025159 ↗
18. Dynamically tunable electromagnetically induced transparency analogy in terahertz metamaterial10.1016/j.optcom.2017.09.084 ↗
19. Dynamically selective control of dual-mode electromagnetically induced transparency in terahertz metal-graphene metamaterial10.1364/OSAC.380279 ↗
20. A novel graphene metamaterial design for tunable terahertz plasmon induced transparency by two bright mode coupling10.1016/j.optcom.2017.01.008 ↗
21. Polarization-insensitive electromagnetically-induced transparency in planar metamaterial based on coupling of ring and zigzag spiral resonators10.1142/S0217984920500931 ↗
22. Controllable all-optical modulation speed in hybrid silicon-germanium devices utilizing the electromagnetically induced transparency effect10.1515/nanoph-2020-0017 ↗
23. Analogue of tunable electromagnetically induced transparency in terahertz metal-graphene metamaterial10.1088/2053-1591/ab03a6 ↗
24. All-dielectric metasurface analogue of electromagnetically induced transparency10.1038/ncomms6753 ↗
25. Active control of electromagnetically induced transparency based on terahertz hybrid metal-graphene metamaterials for slow light applications10.1016/j.ijleo.2019.163398 ↗
26. Planar metamaterial analogue of electromagnetically induced transparency for a miniature refractive index sensor10.1016/j.physleta.2019.125947 ↗
27. Sensing and slow light properties of dual-band terahertz metamaterials based on electromagnetically induced transparency-like10.7498/aps.71.20212163 ↗
28. Sensing enhancement of electromagnetically induced transparency effect in terahertz metamaterial by substrate etching10.3389/fphy.2021.664864 ↗
29. Low-loss planar metamaterials electromagnetically induced transparency for sensitive refractive index sensing10.1088/1361-6463/aa865b ↗
30. Design of broad stopband filters based on multilayer electromagnetically induced transparency metamaterial structures10.3390/ma12060841 ↗
31. All-optical tunable slow-light based on an analogue of electromagnetically induced transparency in a hybrid metamaterial10.1039/d1na00232e ↗
32. High-performance quality factor based sensor with diagonal cylinder metasurface of the bound state in the continuum10.1007/s13320-022-0673-6 ↗
33. Reconfigurable multifunction polarization converter integrated with pin diode10.1109/LMWC.2021.3064039 ↗
34. An equivalent circuit model of FSS-based metamaterial absorber using coupled line theory10.1109/LAWP.2014.2369732 ↗
35. Microwave microfluidic sensor based on a microstrip splitter/combiner configuration and split ring resonators (SRR) for dielectric characterization of liquids10.1109/JSEN.2017.2747764 ↗
36. Highly sensitive detection of malignant glioma cells using metamaterial-inspired THz biosensor based on electromagnetically induced transparency10.1016/j.bios.2021.113241 ↗
37. Metamaterial-inspired 2D cavity grating with electromagnetically induced reflection as a glucose sensor10.1088/1402-4896/abcff2 ↗
38. Improved the quality factor and sensitivity of a surface plasmon resonance sensor with transition metal dichalcogenide 2D nanomaterials10.1007/s11051-020-04872-0 ↗
39. All-optical analog to electromagnetically induced transparency in multiple coupled photonic crystal cavities10.1103/PhysRevLett.102.173902 ↗
40. Dual-band electromagnetically induced transparency (EIT) terahertz metamaterial sensor10.1364/OME.425126 ↗
41. Design and optimization of terahertz metamaterial sensor with high sensing performance10.1016/j.optcom.2021.127051 ↗
42. Design of a terahertz metamaterial sensor based on split ring resonator nested square ring resonator10.1088/2053-1591/abb496 ↗