journal article·2024-05-01Open access

Combustion characteristics of Al/PTFE materials with different microstructures

Hang Zhou, Jianwei Zhen, Huijuan Ma, Shiguo Du

Materials Research Express· Volume 11· Issue 5

Abstract

Abstract The microstructures play a crucial role in the combustion of aluminum/polytetrafluoroethylene (Al/PTFE) materials. Mechanically activated Al/PTFE typically demonstrates higher reactivity but a lower combustion rate compared to physically mixed Al/PTFE. Recently, the combustion performance of fuel-rich Al/PTFE has been well explained by the microexplosion mechanism. In this study, the combustion characteristics of stoichiometric Al/PTFE (26.5:73.5 wt%) materials with varying microstructures were investigated to further the understanding of their combustion mechanism and offer insights for their potential applications in metal cutting. The Al/PTFE materials with different microstructures were prepared using sonication and ball milling methods. The results of scanning electron microscope (SEM) analysis suggest that the sonicated Al/PTFE (s-Al/PTFE) containing spherical Al particles displayed a loosely dispersed structure, while the milled Al/PTFE (m-Al/PTFE) exhibited a densely layered structure with flake-like Al particles coated by the PTFE matrix. The milled Al/PTFE was found to be mechanically activated. Combustion in quartz tubes was recorded using a high-speed camera and a video. Combustion of s-Al/PTFE demonstrated a high-temperature flame (∼2346 K) and obvious microexplosions featuring hot particles ejection, while combustion of m-Al/PTFE showed a weak flame (∼2037 K) and slow-burning, featuring dense carbon smoke. Increasing the powder density was observed to slightly decrease (∼100 K) flame temperature. Microstructure and phase analysis of combustion products were systematically conducted to elucidate the combustion behaviors. The results suggest that the residue of s-Al/PTFE contained high AlF3 and low carbon content, whereas the residue of m-Al/PTFE exhibited the opposite condition. The results of the combustion tests suggest that microexplosions promoted the oxidation of hot Al particles and carbon products, consequently leading to a fast reaction, high flame temperature, and enhanced heat transfer capability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · Flame retardant materials and properties · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Metal-based reactive nanomaterials10.1016/j.pecs.2008.09.001 ↗
2. Combustion velocities and propagation mechanisms of metastable interstitial composites10.1063/1.2058175 ↗
3. Ignition of nanocomposite thermites by electric spark and shock wave10.1002/prep.201400027 ↗
4. Ignition and combustion analysis of direct write fabricated aluminum/metal oxide/PVDF films10.1016/j.combustflame.2019.08.023 ↗
5. The characteristics of combustion reactions involving thermite under different shell materials10.1039/D0RA05415A ↗
6. Combustion of a rapidly initiated fully dense nanocomposite Al–CuO thermite powder10.1080/13647830.2019.1582804 ↗
7. Aluminum particle reactivity as a function of alumina shell structure: Amorphous versus crystalline10.1016/j.powtec.2020.06.084 ↗
8. Fluorination of an alumina surface: modeling aluminum– fluorine reaction mechanisms10.1021/acsami.7b05372 ↗
9. A closer look at determining burning rates with imaging diagnostics10.1016/j.optlaseng.2019.105841 ↗
10. Highly reactive metastable intermixed composites (MICs): preparation and characterization10.1002/adma.201706293 ↗
11. A promising strategy to obtain high energy output and combustion properties by self-activation of nano-Al10.1016/j.combustflame.2019.03.016 ↗
12. Fluorine-containing oxidizers for metal fuels in energetic formulations10.1016/j.dt.2018.06.001 ↗
13. Confined flame propagation of Al/PTFE mechanically activated composites10.1016/j.combustflame.2018.08.024 ↗
14. Investigation on reaction energy, mechanical behavior and impact insensitivity of W–PTFE–Al composites with different W percentage10.1016/j.matdes.2015.12.045 ↗
15. An effective way to enhance energy output and combustion characteristics of Al/PTFE10.1016/j.combustflame.2020.01.008 ↗
16. Modified model of Al/PTFE projectile impact reaction energy release considering energy loss10.1016/j.expthermflusci.2020.110132 ↗
17. Aluminum agglomeration reduction in a composite propellant using tailored Al/PTFE particles10.1016/j.combustflame.2013.08.009 ↗
18. Tuning the reactivity and combustion characteristics of PTFE/Al through carbon nanotubes and grapheme10.1016/j.tca.2019.05.012 ↗
19. Effects of PTFE content and sintering temperature on the morphology and combustion performances of Al/PTFE composites Chinese10.11943/CJEM2020155 ↗
20. The effect of sintering and cooling process on geometry distortion and mechanical properties transition of PTFE/Al reactive materials10.1016/j.dt.2019.10.006 ↗
21. Experimental study on burning of two Al/PTFE samples10.1016/j.applthermaleng.2020.115857 ↗
22. Effect of porosity on dynamic mechanical properties and impact response characteristics of high aluminum content PTFE/Al energetic materials10.3390/ma13010140 ↗
23. A comparative study on the mechanical and reactive behavior of three fluorine-containing thermites10.1039/D0RA00044B ↗
24. Characterization of thermal reaction of aluminum/copper (II) oxide/poly(tetrafluoroethene) nanocomposite by thermogravimetric analysis, differential scanning calorimetry, mass spectrometry and x-ray diffraction10.1016/j.tca.2015.10.012 ↗
25. Fast reactions with nano- and micrometer aluminum: A study on oxidation versus fluorination10.1016/j.combustflame.2008.06.003 ↗
26. Altering combustion of silicon/polytetrafluoroethylene with two-step mechanical activation10.1016/j.combustflame.2014.11.005 ↗
27. Exothermic surface chemistry on aluminum particles promoting reactivity10.1016/j.apsusc.2014.07.112 ↗
28. Experimental study and simulation of the reaction mechanism of Al–PTFE mechanically activated energetic composites10.1039/D3RA02509H ↗
29. Energetic metastable n-Al@PVDF/EMOF composite nanofibers with improved combustion performances10.1016/j.cej.2019.123146 ↗
30. Design and fabrication of energetic superlattice like-PTFE/Al with superior performance and application in functional micro-initiator10.1016/j.nanoen.2014.12.016 ↗
31. 3D printing and development of fluoropolymer based reactive inks10.1002/adem.201700390 ↗
32. The influence of alumina passivation on nano-Al/Teflon reactions10.1016/j.tca.2009.03.018 ↗
33. Modifying aluminum reactivity with poly(carbon monofluoride) via mechanical activation propellants10.1002/prep.201200202 ↗
34. Preparation and characterization of mechanically activated aluminum/polytetrafluoroethylene composites and their reaction properties in high temperature water steam10.1016/j.jallcom.2018.05.087 ↗
35. Altering reactivity of aluminum with selective inclusion of polytetrafluoroethylene through mechanical activation10.1002/prep.201200102 ↗
36. Microexplosions and ignition dynamics in engineered aluminum/polymer fuel particles10.1016/j.combustflame.2016.10.008 ↗
37. Study of the spatial distribution of burning particles in a pyrotechnic flame based on particle velocity10.1080/07370652.2013.839009 ↗
38. Controlled synthesis of GeSe2 and GeSe nanostructures induced by TBAB10.1007/s12598-022-02148-1 ↗
39. Effect of al particle size on the thermal degradation of al/teflon mixtures10.1080/00102200601182333 ↗
40. The effect of slow heating rates on the reaction mechanisms of nano and micron composite thermite reactions10.1007/s10973-005-7342-z ↗
41. Influence of ceramic particles as additive on the mechanical response and reactive properties of Al/PTFE reactive composites10.1039/C9RA09291A ↗
42. Thermal decomposition behavior and thermal safety of nitrocellulose with different shape CuO and Al/CuO nanothermites10.3390/nano10040725 ↗
43. Combustion of B4C/KNO3 binary pyrotechnic system10.1016/j.dt.2020.10.003 ↗
44. Research on radiation spectroscopy thermometry of plume of solid rocket motor10.3964/j.issn.1000-0593(2021)01-0305-07 ↗
45. Kramida A Ralchenko Yu Reader J NIST ASD Team 2023 NIST Atomic Spectra Database (version 5.11) National Institute of Standards and Technology ( https://physics.nist.gov/asd ) 10.18434/T4W30F10.18434/T4W30F ↗
46. Research on the influence of spectral response on radiation spectroscopy thermometry10.3964/j.issn.1000-0593(2018)02-0638-05) ↗
47. Energy release behavior of Al/PTFE reactive materials powder in a closed chamber10.1063/5.0004191 ↗
48. Understanding the mechanism of aluminium nanoparticle oxidation10.1080/13647830600800686 ↗